Search results

The present work focuses on evaluating the physical and mechanical characteristics of geopolymer concrete (GPC) by replacing the sodium silicate waste (SSW) in place of traditional river sand. The aim is to create eco-friendly concrete that mitigates the depletion of conventional river sand and conserves natural resources. Additionally, the study seeks to explore how the moisture content of filler materials affects the performance of GPC.

SSW obtained from the sodium silicate industry was used as filler material in the production of GPC, which was cured at ambient temperature. Instead of the typical conventional river sand, SSW was substituted at 25 and 50% of its weight. Three distinct moisture conditions were applied to both river sand and SSW. These conditions were classified as oven dry (OD), air dry (AD) and saturated surface dry (SSD).

As the proportion of SSW increased, there was a decrease in the slump of the GPC. The setting time was significantly affected by the higher percentage of SSW. The presence of angular-shaped SSW particles notably improved the compressive strength of GPC when replacing a portion of the river sand with SSW. When exposed to elevated temperatures, the performance of the GPC with SSW exhibited similar behavior to that of the mix containing conventional river sand, but it demonstrated a lower residual strength following exposure to elevated temperatures.

Exploring the possible utilization of SSW as a substitute for river sand in GPC, and its effects on the performance of the proposed mix. Analyzing, how varying moisture conditions affect the performance of GPC containing SSW. Evaluating the response of the GPC with SSW exposed to elevated temperatures in contrast to conventional river sand.

Christmas is the most consumed event of the year, always full of traditions, namely family ones, which are very significant. In this way, it is intended to find out the importance of traditions at Christmas time and analyze their implications for family businesses.

The study is quantitative in nature, based on a questionnaire survey carried out with 551 Portuguese individuals, over 18 years of age, where different issues related to Christmas traditions and family are addressed.

The results demonstrate that the Christmas traditions scale is made up of four factors: family traditions on Christmas Eve, aspects related to the Christmas spirit, changes in Christmas traditions with the COVID-19 pandemic and traditions of participating in events with family at Christmas. Cod and octopus dishes are the most popular dishes on Christmas Eve. In relation to sweets/desserts, king cake, rabanadas, vermicelli, children's bread and sponge cake are the most common on Christmas Eve.

The study helps to understand Portuguese Christmas traditions, providing knowledge that allows defining strategies for family businesses, improving the experience and relationship with consumers at a special time of year. It is hoped that the trends in Christmas traditions in this study will contribute to unveiling the Christmas spirit, also serve as a marketing image and create curiosity and motivation on the part of other cultures to visit Portugal during this festive season, in order to experience Christmas traditions.

The study explores the nexus between Ibu-Ubu boyhood initiation and the conservation of cultural heritage in Afikpo, Southeast Nigeria. The study is motivated by the rarity of such cultural conservation through initiation rites in an age of Christian-inspired culture terrorism against Igbo traditional religion, arts and relics.

The study adopted cultural anthropological research method. The boyhood initiation rite was studied through participant observation of the initiation between September and November 2017. As a cultural anthropological study, oral evidence was derived from the men who had undergone the rite. Through the oral evidence, interpretations were given to the material culture, monuments and heritage that have been conserved through Ibu-Ubu initiation rite.

The study discovered that amid the deluge of Christian-motivated culture terrorism and erosion of Igbo cultural arts, relics and heritage, the people of Afikpo have preserved most of their tangible and intangible heritage through the Ibu-Ubu boyhood initiation rites.

This study will assist in the reinvigoration of campaigns on environmental and heritage conservation in Igboland. It is sufficient to posit that Igboland is ridden with myriads of environmental and cultural terrorism, perpetrated by some Christian fanatics. The study reveals the relevance of the boyhood initiation rites in ensuring the preservation and conservation of Igbo cultural heritage in a century marked with fanatical Christian evangelism, culture-terrorism and destruction of both tangible and intangible heritages, which the Christians have labelled evil, barbaric and fetish.

The author’s interest in vernacular architecture, over the years, has attracted the author’s attention to three distinctive and similar forms of architecture in faraway regions of the globe. These are; Asir region of Saudi Arabia, The Caucasus including the republic of Georgia, Chechenia, and North Ossetia, and Sichuan region in China. Stone towers dominate the landscape of these remote regions. The similarity of these towers in these far away regions is quite remarkable.

This paper will introduce these towers in their geographic, social and natural context. Although several studies have been done on these regions, it is the aim of this paper to introduce their architecture in a comparative approach to explore how these remotes corners of the globe with different historical, ethnic and cultural backgrounds developed similar architectural forms in total isolation from each other.

Architecture is a physical production of different and diverse factors. Geographically, isolated regions with similar natural and social factors, mountainous landscape, tribally-based, agrarian societies, produces similar architectural forms.

This paper is a clear testimony to the human nature and how people think, react and build, under similar conditions. Architecture becomes a manifestation of human oneness, unity, believes and behaviour.

This paper aims to solve the problems molybdenum disulfide (MoS₂) nanosheets suffer from inadequate dispersion stability and form a weak lubricating film on the friction surface, which severely limits their application as lubricant additives.

MoS₂/C₆₀ nanocomposites were prepared by synthesizing molybdenum disulfide (MoS₂) nanosheets on the surface of hydrochloric acid-activated fullerenes (C₆₀) by in situ hydrothermal method. The composition, structure and morphology of MoS₂/C₆₀ nanocomposites were characterized. Through the high-frequency reciprocating tribology test, its potential as a lubricant additive was evaluated.

MoS₂/C₆₀ nanocomposites that were prepared showed good dispersion in dioctyl sebacate (DOS). When 0.5 Wt.% MoS₂/C₆₀ was added, the friction reduction performance and wear resistance improved by 54.5% and 62.7%, respectively.

MoS₂/C₆₀ composite nanoparticles were prepared by in-situ formation of MoS₂ nanosheets on the surface of C₆₀ activated by HCl through hydrothermal method and were used as potential lubricating oil additives.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-10-2023-0321/

Green roofs are strategies for the ecological intensification of cities and a measure of meeting some of the sustainable development goals (SDGs). They have widely been adopted as an adaptation strategy against an urban heat island (UHI). However, they are conventionally soil-based making it difficult and expensive to adopt as a strategy for greening existing buildings (GEB). This paper, therefore, develops a novel green roof system using climbers for thermal-radiative performance. The paper explores the vitality of climbing species as a nature-based strategy for GEB, and for the ecological improvement of the predominantly used cool roofs in sub-Saharan Africa (SSA).

Simulation for the same building Kejetia Central Market (KCM) Redevelopment; the existing aluminium roof (AL), soil-based extensive green roof (GR1) and the proposed green roof using climbing plants (GR2) were performed using ENVI-met. The AL and GR1 were developed as reference models to evaluate and compare thermal-radiative performance of the conceptual model (GR2). The long wave radiation emission (Q_lw), mean radiant temperature (MRT) and outdoor air temperature (T_a) of all three roofing systems were simulated under clear sky conditions to assess the performance and plant vitality considering water access, leaf temperature (T_f) and latent heat flux (LE₀) of GR1 and GR2.

There was no short wave radiation (Q_sw) absorption at the GR2 substrate since the climbers have no underlying soil mass, recording daily mean average Q_lw emission of 435.17 Wm⁻². The soil of GR1, however, absorbed Q_sw of 390.11 Wm⁻² and a Q_lw emission of 16.20 wm⁻² higher than the GR2. The AL recorded the lowest Q_lw value of 75.43 Wm⁻². Also, the stomatal resistance (r_s) was higher in GR1 while GR2 recorded a higher average mean transpiration flux of 0.03 g/sm³. This indicates a higher chance of survival of the climbers. The T_a of GR2 recording 0.45°C lower than the GR1 could be a good UHI adaptation strategy.

No previous research on climbers for green roof systems was found for comparison, so the KCM project provided a unique confluence of dynamic events including the opportunity for block-scale impact assessment of the proposed GEB strategy. Notwithstanding, the single case study allowed a focussed exploration of the novel theory of redefining green roof systems with climbers. Moreover, the simulation was computationally expensive, and engaging multiple case studies were found to be overly exhaustive to arrive at the same meaningful conclusion. As a novelty, therefore, this research provides an alternative theory to the soil-based green roof phenomenon.

The thermal-radiative performance of green roofs could be improved with the use of climbers. The reduction of the intensity of UHI would lead to improved thermal comfort and building energy savings. Also, very little dependence on the volume of soil would require little structural load consideration thereby leading not only to cheaper green roof construction but their higher demand, adoption and implementation in SSA and other low-income economies of the global south.

The reduction of the consumption of topsoil and water for irrigation could avoid the negative environmental impacts of land degradation and pollution which have a deleterious impact on human health. This fulfils SDG 12 which seeks to ensure responsible consumption of products. This requires the need to advance the research for improvement and training of local built environment practitioners with new skills for installation to ensure social inclusiveness in the combat against the intractable forces of negative climate impacts.

Climbers are mostly known for green walls, but their innovative use for green roof systems has not been attempted and adopted; it could present a cost-effective strategy for the GEB. The proposed green roof system with climbers apart from becoming a successful strategy for UHI adaptation was also able to record an estimated 568% savings on topsoil consumption with an impact on the reduction of pollution from excavation. The research provides an initial insight into design options, potentials and limitations on the use of climbers for green roofs to guide future research and experimental verification.

This purpose of this paper is to address the problem of reducing energy consumption in existing buildings using advanced noninvasive interventions (NVIs).

The study methodology involves systematically developing and testing 18 different NVIs in six categories (glazing types, window films, external shading devices, automated internal shades, lighting systems and nanopainting) to identify the most effective individual NVIs. The impact of each individual NVI was examined on an exemplary university educational building in a hot climate zone in Egypt using a computational energy simulation tool, and the results were used to develop 39 combination scenarios of dual, triple and quadruple combinations of NVIs.

The optimal 10 combination scenarios of NVIs were determined based on achieving the highest percentages of energy reduction. The optimal percentage of energy reduction is 47.1%, and it was obtained from a combination of nanowindow film, nanopainting, LED lighting and horizontal louver external. The study found that appropriate mixture of NVIs is the most key factor in achieving the highest percentages of energy reduction.

These results have important implications for optimizing energy savings in existing buildings. The results can guide architects, owners and policymakers in selecting the most appropriate interventions in existing buildings to achieve the optimal reduction in energy consumption.

The novelty of this research unfolds in two significant ways: first, through the exploration of the potential effects arising from the integration of advanced NVIs into existing building facades. Second, it lies in the systematic development of a series of scenarios that amalgamate these NVIs, thereby pinpointing the most efficient strategies to optimize energy savings, all without necessitating any disruptive alterations to the existing building structure. These combination scenarios encompass the incorporation of both passive and active NVIs. The potential application of these diverse scenarios to a real-life case study is presented to underscore the substantial impact that these advanced NVIs can have on the energy performance of the building.

The internal (farmer-controlled) and external (non-farmer-controlled) factors affect crop yield. However, not a single study has identified and analyzed yield predictors in India using effective predictive models. Thus, this study aims to investigate how internal and external predictors impact pearl millet yield and Stover yield.

Descriptive analytics and artificial neural network are used to investigate the impact of predictors on pearl millet yield and Stover yield. From descriptive analytics, 473 valid responses were collected from semi-arid zone, and the predictors were categorized into internal and external factors. Multi-layer perceptron-neural network (MLP-NN) model was used in Statistical Package for the Social Sciences version 25 to model them.

The MLP-NN model reveals that rainfall has the highest normalized importance, followed by irrigation frequency, crop rotation frequency, fertilizers type and temperature. The model has an acceptable goodness of fit because the training and testing methods have average root mean square errors of 0.25 and 0.28, respectively. Also, the model has R² values of 0.863 and 0.704, respectively, for both pearl millet and Stover yield.

To the best of the authors’ knowledge, the current study is first of its kind related to impact of predictors of both internal and external factors on pearl millet yield and Stover yield.

The literature reveals that most studies have estimated crop yield using limited parameters and forecasting approaches. However, this research will examine the impact of various predictors such as internal and external of both yields. The outcomes of the study will help policymakers in developing strategies for stakeholders. The current work will improve pearl millet yield literature.

The purpose of this study is to establish Loratadine [LRD] quantification in purified and capsule formulations using a precise and specific Reversal Phase with a very high-performance liquid Chromatographic [RP-HPLC] technique. The approach was evaluated in agreement with the principles of the International Conference on Harmonization [ICH]. Arcus EP-C18 Ion Pac column, 5 m, 4.6 mm, 250 mm, mobile phase Methanol: Acetonitrile (60:40) v/v. Dibasic potassium phosphate buffer, pH 7.2, flow rate 1.0 ml/min.

The HPLC system used a 340 nm UV detector for testing. A 10-min run time was used for the analysis. At concentrations ranging from 2 to 10 g/ml, the technique was linear (R² = 0.9998), exact (intra-day and inter-day relative standard deviation [RSD] values 1.0%), accurate (range recovery = 96%–102%), exclusive and strong.

The detecting and quantitation limits were 0.92 g/ml and 2.15 g/ml, respectively.

The findings demonstrated that the proposed method could accurately determine LRD in bulk and pill dose formats quickly and accurately.