Search results

This paper focuses on dry port as a key notion in port-hinterland development. We first discuss the concept of dry port by reviewing existing literature. Then, we explore the reasons behind the emergence and development of inland node systems in different geographical, economic and institutional contexts. Next, the paper presents a classification of dry ports based on a multitude of factors and dimensions and the respective benefits to different parties. The study then focuses on the specific characteristics of dry ports and associated transport networks in developing countries.

In the last part, we present a case study on the dry port system in Vietnam by reviewing the seaport and inland transport system and analyzing the current status of inland terminals in Vietnam. To conclude, a SWOT analysis is presented with regard to the development of the dry port network in Vietnam, followed by recommendations for policy makers.

In cities with high density, heat is often trapped between buildings which increases the frequency and intensity of heat events. Researchers have focused on developing strategies to mitigate the negative impacts of heat in cities. Adopting green infrastructure and cooling pavements are some of the many ways to promote thermal comfort against heat. The purpose of this study is to improve microclimate conditions and thermal comfort levels in high-density living conditions in Seoul, South Korea.

This study compares six design alternatives of an apartment complex with different paving and planting systems. It also examines the thermal outcome of the alternatives under normal and extreme heat conditions to suggest strategies to secure acceptable thermal comfort levels for the inhabitants. Each alternative is analyzed using ENVI-met, a software program that simulates microclimate conditions and thermal comfort features based on relationships among buildings, vegetation and pavements.

The results indicate that grass paving was more effective than stone paving in lowering air temperature and improving thermal comfort at the near-surface level. Coniferous trees were found to be more effective than broadleaf trees in reducing temperature. Thermal comfort levels were most improved when coniferous trees were planted in paired settings.

Landscape elements show promise for the improvement of thermal conditions because it is much easier to redesign landscape elements, such as paving or planting, than to change fixed urban elements like buildings and roads. The results identified the potential of landscape design for improving microclimate and thermal comfort in urban residential complexes.

The results contribute to the literature by examining the effect of tree species and layout on thermal comfort levels, which has been rarely investigated in previous studies.

This paper seeks to provide empirical insight into how industrialization and technology affect environmental quality in Ghana.

Using Ecological Footprint (ECF) as a measure of environmental degradation, the authors employ annual data from World Development Indicators of the World Bank and the Global Footprint Network spanning from 1970 to 2017 and apply the fully modified least squares (FMOLS) technique.

The results reveal that industrialization has a negative significant influence on ECF, suggesting that industrialization contributes to environmental sustainability in Ghana. The authors find that technology is harmful to the environment as it has a positive significant effect on ECF. The study also documents that while education and financial development improve environmental sustainability, fossil fuel consumption exacerbates environmental degradation in Ghana.

The environmental impact of industrialization is still being debated, with very scanty empirical evidence in the African context. Based on a detailed review of the literature, this paper provides an initial attempt to investigate the industrialization–environmental sustainability nexus in Ghana. Besides, whereas most extant studies have employed CO₂ emission as a proxy of environmental degradation, the authors use ECF to gauge the level of environmental degradation which is regarded as a more inclusive metric.

The purpose of this paper is to explore consumers’ health perception and demonstrate its relevance in product and process design in early stages of new product development.

A dried mango was used as a case study involving three countries: Indonesia, China and the Netherlands. Data were collected from nine focus groups (n=53 participants) and were content-analysed to acquire in-depth insights.

Four themes of health perception emerged, namely, nutrition, naturalness, taste and well-being, which were all expressed on different levels of abstractness. Participants’ health perception of dried mango varied, it is related to the product category it is compared with, e.g. candy or fresh fruit, and the eating context, e.g. position in the diet either as a snack or a meal. In extension participants mentioned product and process characteristics. Application of the insights into product and process design was performed through iterative interactions between consumer scientists and food technologists. The development of two product concepts was elaborated to transform the insights into technical product and process specifications for a natural dried mango product.

This transformation suggests that iterative interactions are necessary to achieve relevant product and process characteristics in the simultaneous design of the technical product and process specifications based on consumer perceptions.

The purpose of this paper is to measure food loss and waste by material flow analysis (MFA) tool. Applying this methodology, the authors estimate wastage-related losses and discuss opportunities for more circular and sustainable practices in the Italian potato industry.

MFA is applied to two specific typologies as follows: ready-to-eat (chips) and dried potato products produced in Italy. The analysis refers to the year 2017 as the complete dataset useful for this study includes measurements until this year. A bottom-up and top-down mixed approach is applied, and functional unit refers to 1 t of potatoes consumed as final product.

MFA is applied to quantify and qualify material balance associated with 1 t of potatoes consumed as final product. In Italy, in 2017, more than 22,000 t of fresh tubers were lost, including 3,500–4,800 t of starch, equivalent to 52,800–72,600 GJs. Moreover, fewer than 23,000 t of skins and scraps were produced within industrial plants, not available for food but suitable for animal feed (dry skins are an excellent carbohydrates source in cattle and poultry feed), starch industry and bioenergy production (biogas and/or bioethanol).

This research is one of the few studies proposing MFA methodology as a tool to measure food waste. This analysis shows its utility in terms of food waste quality/quantity evaluation, supporting both company management and policymakers.

White tea is an unfermented tea made from young shoots of Camellia sinensis protected from sunlight to avoid polyphenol degradation. White tea contains a high level of polyphenolic compounds known as catechins. Several types of evidence have suggested that tea consumption has benefits in body weight and endurance maintenance. This study was designed to evaluate the effect of white tea on body weight and endurance of animal models.

This research was an intervention design using 20 Wistar white rats (Rattus Norvegicus) in body weight between 150 and 200 g. The rats were randomized into four groups, three groups receiving white tea drink (WTD) with different doses and the other group receiving plain water in equal volume as a control group for four weeks. The forced swim test (FST) was done to measure their struggling capacity, and digital bodyweight to measure the weight.

Intervention (WTD Groups and Control) caused weight gain among except G3 with the highest doses of white tea. The result showed that WTD intake in G3 had a significant difference (p < 0.05) on body weight gain compared to control. The authors found that WTD in a specific dose (G3: 0.22 mg) tends to maintain the body weight of animals (219.2 ± 41.96; 212.6 ± 46.90, respectively), while other doses caused weight gain. WTD also significantly increased the swimming and struggling capacity of rats that represented improvements the endurance along with the test. There was a statistically significant difference in endurance among all groups (p < 0.05).

The results of this study can be followed as human intervention research as an input for nutritionists and sports scientists to explore the beneficial effect of white tea.

The results of this study can be followed as human intervention research as an input for nutritionists and sports scientists to explore the beneficial effect of white tea.

This study adds more evidence and information about the advantages of white tea as potential beverages in future healthy lifestyles.

Menstruation is a part of the female reproductive cycle that begins with adolescence. Menstruation is a natural change; it relates to several malpractices and misconceptions that may contribute to adverse health outcomes.

The authors have searched relevant papers using Google Scholar and PubMed to write this mini review.

During menstruation, poor hygiene maintenance can cause serious illness, which includes the urinary tract and reproductive tract infection. Menstruation management is a hygienic system, and it is essential for females because poor hygiene maintenance during menstruation can cause some infections and numerous sexually transmitted diseases. There are a few nanotechnology-based products that have come into the market to offer some relief to females during their periods.

This mini review will help researchers to design innovative female hygiene products that can relieve the discomfort caused to women during their reproductive age.

The purpose of this paper is to investigate the effect of round pits arrangement patterns on tribological properties of journal bearing. In this paper, the tribological behaviors of journal bearing with different arrangement patterns under lubrication condition were studied based on M-2000 friction and wear tester.

The friction and wear of journal bearing contact surface were simulated by ANSYS. The wear mechanism of bearing contact surfaces was investigated by the means of energy dispersive spectrum analysis on the surface morphology and friction and wear status of the journal bearing specimens by Scanning Electron Microscopy (SEM) and Energy Dispersive Spectrometer (EDS). Besides, the wearing capacity of the textured bearing was predicted by using the GM (1,1) and Grey–Markov model.

As the loads increase, the friction coefficient of journal bearing specimens decrease first and then increase slowly. The higher rotation speed, the lower friction coefficient and the faster temperature build-up. The main friction method of the bearing sample is three-body friction. The existence of texture can effectively reduce friction and wear. In many arrangement patterns, the best is 4# bearing with round pits cross-arrangement pattern. Its texturing diameters are 60 µm and 125 µm, and the spacing and depth are 200 µm and 25 µm, respectively. In addition, the Grey–Markov model prediction result is more accurate and fit the experimental value better.

The friction and wear mechanism is helpful for scientific research and engineers to understand the tribological behaviors and engineering applications of textured bearing. The wear capacity of textured bearing is predicted by using the Grey–Markov model, which provides technical help and theoretical guidance for the service life and reliability of textured bearing.

The purpose of this paper is to analyse the production cycle of glazed porcelain stoneware, from the extraction of raw materials to the packaging of the finished product, with the aim of verifying the effects of integrating an environmental impact assessment into the decision-making process for managing the life cycle, to make it economically and ecologically sustainable, in a holistic approach along the supply-chain.

The research is performed using the life cycle assessment and life cycle costing methodologies, to identify environmental impacts and costs, that occur during extraction of raw materials, transportation, ceramic tiles production, material handling, distribution and end-of-life stages within a cradle to grave perspective.

Through the use of a comprehensive analysis of the environmental impact assessment and related externalities, three possible strategic options to improve the environmental performance and costs of ceramic tile production were formulated, leveraging sustainability as a competitive advantage.

This exploratory research opens future lines of investigation, the first of which is to confirm the technological feasibility and market responsiveness to the three strategic solutions hypothesised thanks to the use of an innovative eco-design technique.

The research has allowed testing and validating the tools of environmental impact assessment (life cycle assessment) and economic impact assessment (life cycle costing as structured methodologies in a life cycle management framework, to help companies implement competitive strategies based on sustainability.