Search results

The purpose of this paper is to investigate the effect of round pits arrangement patterns on tribological properties of journal bearing. In this paper, the tribological behaviors of journal bearing with different arrangement patterns under lubrication condition were studied based on M-2000 friction and wear tester.

The friction and wear of journal bearing contact surface were simulated by ANSYS. The wear mechanism of bearing contact surfaces was investigated by the means of energy dispersive spectrum analysis on the surface morphology and friction and wear status of the journal bearing specimens by Scanning Electron Microscopy (SEM) and Energy Dispersive Spectrometer (EDS). Besides, the wearing capacity of the textured bearing was predicted by using the GM (1,1) and Grey–Markov model.

As the loads increase, the friction coefficient of journal bearing specimens decrease first and then increase slowly. The higher rotation speed, the lower friction coefficient and the faster temperature build-up. The main friction method of the bearing sample is three-body friction. The existence of texture can effectively reduce friction and wear. In many arrangement patterns, the best is 4# bearing with round pits cross-arrangement pattern. Its texturing diameters are 60 µm and 125 µm, and the spacing and depth are 200 µm and 25 µm, respectively. In addition, the Grey–Markov model prediction result is more accurate and fit the experimental value better.

The friction and wear mechanism is helpful for scientific research and engineers to understand the tribological behaviors and engineering applications of textured bearing. The wear capacity of textured bearing is predicted by using the Grey–Markov model, which provides technical help and theoretical guidance for the service life and reliability of textured bearing.

The purpose of this paper is to investigate and discuss the effect of multi-shape laser surface texturing (LST) steel surfaces on tribological performance.

The textured surface with some specific formula arrays was fabricated by laser ablation process by combining patterns of circles and triangles, circles and squares and circles and ellipses. The tribological test was performed by a flat-on-flat tribometer under dry and lubrication conditions, and results were compared with that of untextured surface.

The results showed that the textured surface had better friction coefficient performance than the untextured surface due to hydrodynamic lubrication effect. Through an increase in sliding speed, the beneficial effect of LST performance was achieved under dry and lubrication conditions.

This paper develops multi-shape LST steel surfaces for improving the friction and wear performance under dry and lubrication conditions.

This study aims to purpose the suitable location of slip boundary condition and microscale surface textures to enhance the tribological performance of the hydrodynamic journal bearings.

Mass conserving Elrod cavitation algorithm with considering slip boundary condition has been used for predicting the static performance characteristics (load carrying capacity, coefficient of friction and volumetric inflow rate) of finite cylindrical shape textured journal bearings.

It has been observed that the full textured bearing with slip boundary condition in between 0°–180° circumferential region gives a significant reduction in the lubricant rupture zone. However, the introduction of textures up to the interface of slip and the no-slip region is increasing the load-carrying capacity and reduces the shear stress. This reduction in shear stress with combined slip and surface textures is effective in increasing the volumetric inflow rate of the lubricant.

The combined effect of slip boundary condition and surface texturing is increasing the scope of liquid lubricants in hydrodynamic journal bearings and further contributing toward the development of small-scale rotating machines.

The study related to the use of mass conserving Elrod cavitation algorithm for finding the optimum location of slip and surface texture zones has been found rare in the literature. Previous studies show that the mass conserving Elrod cavitation algorithm gives realistic results for textured bearings and its findings show good agreement with the experimental observations.

The accuracy of the machining process is significantly impacted by the performance of hydrostatic bearings. This paper aims to analyze the influence of micro-textured on the performance of the hydrostatic bearing, and the performance of the bearing is improved by designing the arrangement of micro-textured.

Different designs have been used while creating micro-textured bearings. The finite element models of bearing with smooth and micro-textured were established and solved using the computational fluid dynamics method. The arrangement scheme of the micro-textured was evaluated by comparing the influence of the distribution position and arrangement of the micro-textured on the bearing performance.

To improve the performance of the bearing, the bearing capacity was significantly increased, and the friction coefficient of the bearing was decreased when the micro-textured was distributed in the form of an obtuse angle arrangement in the maximum pressure area of the bearing. The experimental findings validate the analysis method.

In this paper, the effect of irregularly arranged micro-textured on bearing performance is investigated to improve the bearing capacity and lubrication status.

This study aims to investigate the effects of irregular groove textures on the friction and wear performance of sliding contact surfaces. These textures possess multiple depths and asymmetrical features. To optimize the irregular groove texture structure of the sliding contact surface, an adaptive genetic algorithm was used for research and optimization purposes.

Using adaptive genetic algorithm as an optimization tool, numerical simulations were conducted on surface textures by establishing a dimensionless form of the Reynolds equation and setting appropriate boundary conditions. An adaptive genetic algorithm program in MATLAB was established. Genetic iterative methods were used to calculate the optimal texture structure. Genetic individuals were selected through fitness comparison. The depth of the groove texture is gradually adjusted through genetic crossover, mutation, and mutation operations. The optimal groove structure was ultimately obtained by comparing the bearing capacity and pressure of different generations of micro-convex bodies.

After about 100 generations of iteration, the distribution of grooved textures became relatively stable, and after about 320 generations, the depth and distribution of groove textures reached their optimal structure. At this stage, irregular texture structures can support more loads by forming oil films. Compared with regular textures, the friction coefficient of irregular textures decreased by nearly 47.01%, while the carrying capacity of lubricating oil films increased by 54.57%. The research results show that irregular texture structures have better lubrication characteristics and can effectively improve the friction performance of component surfaces.

Surface textures can enhance the friction and lubrication performance of metal surfaces, improving the mechanical performance and lifespan of components. However, surface texture processing is challenging, as it often requires multiple experimental comparisons to determine the optimal texture structure, resulting in high trial-and-error costs. By using an adaptive genetic algorithm as an optimization tool, the optimal surface groove structure can be obtained through simulation and modeling, effectively saving costs in the process.

The purpose of this paper is to use a combination of numerical simulation and experiment to evaluate the performance of laser surface texturing (LST) in the field of gear lubrication, and to more accurately predict the lubrication characteristics of different surfaces.

The method used in this paper is developed on the basis of the deterministic solution of the three-dimensional (3D) mixed elasto-hydrodynamic lubrication (EHL) model and the model parameters are corrected by friction test. The film pressure, film thickness and friction coefficient of different micro-textured tooth surfaces are predicted on the basis of accurate 3D mixed EHL models.

The results demonstrate that the micro-texture structure of the tooth surface can increase the local film thickness and enhance the lubricating performance of the tooth surface without drastically reducing the contact fatigue life. The stress distribution and friction characteristics of the tooth surface can be optimized by adjusting the micro-texture arrangement and the size of the micro-textures.

A new evaluation method using a 3D hybrid EHL model and friction test to predict the lubrication characteristics of LST is proposed, which can effectively improve the processing economy and save time.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-11-2020-0423

This paper aims to improve the wear resistance of metal rubber microfilaments and the service life. The effect of surface texture by laser processing on the fretting friction properties of metal rubber microfilaments was studied.

The LQL-F20A laser marking machine was used to fabricate a ring groove array with equal spacing and dense arrangement on the surface of metal rubber microfilaments. The test was carried out with a self-made micro-dynamic frictional tester. The topography of the microfilaments was observed by scanning electron microscopy and analyzed.

It has shown that laser surface texturing can improve the wear performance of microfilaments. Under the same experimental conditions, the microfilaments of textured surface has a smaller depth of wear than un-textured specimen. The wear resistance increases with the increase of texture density. The friction coefficient of textured specimen is significantly reduced compared with un-textured specimen, and the surface texture density of microfilaments has little influence on the friction coefficient after stabilization. In the stage of stable fretting wear, the wear depth will be more with the increase of the load.

There is little research on metal rubber microfilaments tribological properties. In this paper, the effect of laser texturing of microfilaments on micro-dynamic friction properties was studied by friction machine to provide a reference for the application of metal rubber in aerospace, medical and other fields.

The main purpose of this paper is to understand and model the hydrodynamic influence of surface textures on journal bearings.

In the model, a rectangular array of circle dimples is used to modify the film thickness expression. In full film and cavitation regions, classical Reynolds equation and Reynolds boundary condition are used as the governing equations, respectively. By setting high load bearing capacity as the main optimal goal, the influence of textures on tribological characteristics is studied to get the optimal distribution and parameters of textures.

The results suggest that the load bearing capacity of a journal bearing may be improved through appropriate arrangement of textures partially covering its sleeve. The reduction of the cavitation area may also be achieved by arranging the textures in divergent region. With a high density distribution of textures which have step depths varying linearly along the circumferential direction of the bearing, the load bearing capacity enhancement seems to give good performance. Comparing with smooth bearing, the load bearing capacity enhancement of such textures is about 56.1 per cent, although the influence of texture diameters for the same area density seems insignificant.

The paper shows how surface textures can be designed on journal bearing to improve its tribological performances.

This paper aims to carry out tribological experiments to explore the applications of femtosecond laser surface texturing technology on rock bit sliding bearing to enhance the lifetime and working performance of rock bit sliding bearing under high temperature and heavy load conditions.

Surface textures on beryllium bronze specimen were fabricated by femtosecond laser ablation (800 nm wavelength, 40 fs pulse duration, 1 kHz pulse repetition frequency), and then the tribological behaviors of pin-on-disc configuration of rock bit bearing were performed with 20CrNiMo/beryllium bronze tribo-pairs under non-Newtonian lubrication of rock bit grease.

The results showed that the surface texture on beryllium bronze specimens with specific geometrical features can be achieved by optimizing femtosecond laser processing via adjusting laser peak power and exposure time; more than 52 per cent of friction reduction was obtained from surface texture with a depth-to-diameter ratio of 0.165 and area ratio of 5 per cent at a shear rate of 1301 s−1 under the heavy load of 20 MPa and high temperature of 120°C, and the lubrication regime of rock bit bearing unit tribo-pairs was improved from boundary to mixed lubrication, which indicated that femtosecond laser ablation technique showed great potential in promoting service life and working performance of rock bit bearing.

Femtosecond laser-irradiated surface texture has the potential possibility for application in rock bit sliding bearing to improve the lubrication performance. Because proper micro dimples showed good lubrication and wear resistance performance for unit tribo-pairs of rock bit sliding bearing under high temperature, heavy load and non-Newtonian lubrication conditions, which is very important to improve the efficiency of breaking rock and accelerate the development of deep-water oil and gas resources.

Test the detail resolution of fused deposition modeling (FDM) in the direct manufacture of rapid prototypes with textured surfaces.

A benchmark part carrying regular surface patterns with different feature sizes and aspect ratios has been manufactured on a FDM system with different build orientations. Layered parts have been inspected to detect the occurrence of quality defects on textured surfaces.

The experiments reveal the ability of currently available FDM systems to enhance prototype surfaces with form details on a millimeter scale. Results assist in identifying conditions which need to be satisfied in order to successfully reproduce generic texture geometries.

Although the testing method can be applied to any layered manufacturing technique, results are limited to a specific process, and may be influenced by technical improvements of commercial fabrication systems.

A first contribution is given to a full feasibility assessment of direct texturing, which potentially appears as more responsive and cost‐effective solution than current post‐finishing practices.

The paper proposes a systematic approach to the manufacture of textured parts by rapid prototyping techniques. The analysis of surface appearance in the presence of small‐scale form details adds a novel aspect to current approaches to performance benchmarking, which typically focus on form errors and roughness of plain surfaces.