Search results

To identify the effects of laser scan speed and scan spacing on surface morphology, microstructure and structure evolution in direct laser sintering of Cu‐based metal powder.

Scanning electron microscope, differential thermal analyser (DTA) and X‐ray diffractometer were used to examine the microstructure of the sintered parts.

It was found that the decrease of the scan speed and scan spacing could lead to densification due to solute‐reprecipitation mechanism. The formation of oxide Cu₂O is sensitive to the scan spacing due to the lack of Cu₃P protection under the re‐heating condition if using small scan spacing. Furthermore, the result shows that there exist two mechanisms in determining the phosphor distribution. During the laser sintering, concentration diffusion acts as the main mechanism at a fast scan speed and a large scan spacing while solute‐reprecipitation acts as the main mechanism at a low scan speed and small scan spacing.

This paper discloses the influence of process parameters on microstructure evolution and the mechanism of densification in direct laser sintering Cu‐based metal powder. It offers practical help to the researchers who are interested in direct laser sintering metal powder.

The purpose of this paper is to study the effect of blending time, SiC content and fill ratio on the homogeneity of iron‐silicon carbide powder mixture, blended in double‐cone blender; to evaluate density, microstructure and micro hardness of laser sintered iron and iron‐SiC specimens; and study the feasibility of building a complex iron‐SiC metal matrix composite (MMC) part by direct metal laser sintering (DMLS) process.

The morphology and particle size of iron and silicon carbide powders were evaluated. Nickel coating was carried out on silicon carbide particles. Blending of iron‐SiC powders were carried out in two phases in a double‐cone blending equipment. In the first phase, three tests were conducted with fill ratios (ratio of volume of conical blender to volume of powder mixture) of 1.68, 3.39, and 6.8 percent while iron‐SiC weight ratio was kept constant at 97:3. In the second phase, four tests were conducted with iron‐SiC weight ratios of 99:1, 98:2, 97:3, and 95:5 while keeping a constant fill ratio of 1.68 percent. In both the phases, blending was carried out for duration of 43 minutes. Homogeneity of the powder mixture was evaluated at different intervals of time by adopting sampling process. Sintering was carried out on iron and iron‐SiC powder mixture using DMLS machine at laser speed of 50, 75, 100, and 125 mm/s. Microstructure, density and micro hardness studies were carried out on the sintered specimens. A 3D model of a part with complex geometry was modeled using Unigraphics CAD/CAM software and prototype part was built by DMLS technology using the blended iron‐2 weight percent SiC powder.

A reduction in blending time was observed with increase in SiC content and decrease in fill ratio. Microstructure and micro hardness tests conducted on laser sintered iron‐silicon carbide specimens, reveal the homogeneity of blended powder. The density of the iron‐SiC composites sintered at a laser speed of 50 and 75 mm/s, decreased with increase in SiC content. Further, an increase in the micro hardness of iron‐SiC composites was observed with increase in SiC content and decrease in laser speed. Complex functional part was built by DMLS technology with out any supports.

The experiments were conducted with standard blending equipment in which the speed is limited to 48 revolutions per minute only.

Meager information is available on blending of powders for producing MMCs by laser sintering process. The work presented in this paper will be a guideline for researchers to carry out further work in blending of powders for producing MMCs by rapid prototyping process.

The purpose of this paper is to describe the stability and properties of the direct metal laser fabrication (DMLF) process, by putting forward top surface quality (TSQ), which could be a unique and crucially important feature compared with traditional manufacturing methods.

Through the systematic and detailed analysis of DMLF process using related theories of additive manufacturing technologies, it was revealed that TSQ was the key factor for controlling the stability of DMLF process and thus tailoring final properties of metallic parts. Only good TSQ can ensure the stability of DMLF process and excellent performance of metal parts in theory.

TSQ was defined as the surface morphology in macro and micro scopes in laser scanning area of unit layers during DMLF, and could be characterized by three key elements: flatness, compactness and cleanliness. The flatness was the significant factor to assure the shaping during DMLF, while the compactness and cleanliness were the decisive factors to assure the final properties of metal part for DMLF. As an example, the typical top surface defects and their contributing factors in DMLF for Cu‐based metal powder mixtures were investigated thoroughly according to the proposed definition and requirements. Moreover, the specific controlling methods of TSQ were provided and discussed. Eventually, DMLF of three‐dimensional Cu‐based metal sample with complicate structure was successfully performed by taking some effective measures for adjusting TSQ parameters.

Few comprehensive investigations have been carried out on this topic. The definition and evaluation methods of TSQ for DMLF have been introduced for the first time in the present paper.

Selective laser sintering (SLS) is one of the most rapidly growing rapid prototyping techniques (RPT). This is mainly due to its suitability to process almost any material: polymers, metals, ceramics (including foundry sand) and many types of composites. The material should be supplied as powder that may occasionally contain a sacrificial polymer binder that has to be removed (debinded) afterwards. The interaction between the laser beam and the powder material used in SLS is one of the dominant phenomena that defines the feasibility and quality of any SLS process. This paper surveys the current state of SLS in terms of materials and lasers. It describes investigations carried out experimentally and by numerical simulation in order to get insight into laser‐material interaction and to control this interaction properly.

This paper provides an overview of the different binding mechanisms in selective laser sintering (SLS) and selective laser melting (SLM), thus improving the understanding of these processes.

A classification of SLS/SLM processes was developed, based on the binding mechanism occurring in the process, in contrast with traditional classifications based on the processed material or the application. A broad range of commercial and experimental SLS/SLM processes – found from recent articles as well as from own experiments – was used to explain the different binding mechanism categories.

SLS/SLM processes can be classified into four main binding mechanism categories, namely “solid state sintering”, “chemically induced binding”, “liquid phase sintering – partial melting” and “full melting”. Most commercial processes can be classified into the latter two categories, which are therefore subdivided. The binding mechanism largely influences the process speed and the resulting part properties.

The classification presented is not claimed to be definitive. Moreover some SLM/SLM processes could be classified into more than one category, based on personal interpretation.

This paper can be a useful aid in understanding existing SLS/SLM processes. It can also serve as an aid in developing new SLS/SLM processes.

The purpose of this study is to develop a novel comprehensive three-dimensional computational model to predict the transient thermal behavior and residual stresses resulting from the layer-by-layer deposition in the direct metal laser sintering process.

In the proposed model, time integration is performed with an implicit scheme. The equations for heat transfer are discretized by a finite volume method with thermophysical properties of the metal powder and an updated convection coefficient at each time step. The model includes convective and radiative boundary conditions for the exposed surfaces of the part and constant temperatures for the bottom surface on the build plate. The laser source is modeled as a moving radiative heat flux along the scanning pattern, while the thermal gradients are used to calculate directional and von Mises residual thermal stresses by using a quasi-steady state assumption.

In this study, four different scanning patterns are analyzed, and the transient temperature and residual thermal stress fields are evaluated from these patterns. It is found that the highest stresses occur where the laser last leaves off on its scanning pattern for each layer.

The proposed model is designed to capture the layer-by-layer deposition for a three-dimensional geometry while considering the effect of the instantaneous melting of the powder, melt pool, dynamic calculation of thermophysical properties, ease of parametrization of various process parameters and the vectorization of the code for computational efficiency. This versatile model can be used for process parameter optimization of other laser powder bed fusion additive manufacturing techniques. Furthermore, the proposed approach can be used for analyzing different scanning patterns.

The purpose of this article is on the functional usability of metal additive manufacturing (AM) direct metal laser sintering (DMLS) production technology process parameters in the construction industry. In the study, the advantages of thermal optimization and weight reduction in the case of the use of foam metals obtained by changing the hatch distance the production process parameter, in the production of facade panels in the architectural field are revealed.

The methods in the study; production of the small scaled facade panels with nine different hatch distance parameters, determination of the thermal change with the infrared thermography method, microstructure examination, weight measurement.

The paper lays the groundwork for the manufacturability of lighter and lower thermal conductivity facade panels by changing the hatch distance parameters. Within the scope of the study, the definition of semi-open-cell foam aluminum and the product screening strategy offers innovation. Within the scope of the study, this scope is shared as an algorithmic summary. In addition, the study offers a new perspective within the scope of multiple optimizable panel production in facade panels with AM technology.

Hatch distance parameter change was first discussed in this study in the architectural field, and a semi-open cell foam aluminum panel was obtained with the scanning strategy determined within the scope of the study. This panel geometry, which is defined as semi-open cell foam aluminum, can be used as a design element by painting or coating the outer surface, it can be stated that it will also provide thermal and weight optimization.

Different metals have been processed using laser‐based solid freeform fabrication (SFF) processes but very little work has been published on the selective laser melting (SLM) of gold (Au). The purpose of this paper is to check the properties of gold powder and identify suitable processing parameters for SLM of 24 carat gold powder.

A full factorial approach was used to vary the processing parameters and identify suitable processing region for gold powder. The effects of laser processing parameters on the internal porosity of the multi‐layer parts were examined.

The gold powder was found to be cohesive in nature with apparent and tap densities of 9.3 and 10.36 g/cm³, respectively. The reflectance of gold powder was found to be 85 per cent in the infrared range. A very narrow good melting region was identified for gold powder. The balling phenomenon was observed at both low and high scan speeds. The size of droplets in the balling region tended to increase with increasing laser power and decreasing scan speeds. The porosity in gold multi‐layer parts was found to be the minimum for a laser power of 50 W and scan speed of 65 mm/s where most of the porosity was found to be inter‐layer porosity.

This research is the first of its kind directly processing 24 carat gold using SLM, identifying the suitable processing parameters and its effect on the internal porosity and structure of multi‐layer parts.

Rapid tooling (RT) integrated with additive manufacturing technologies have been implemented in various sectors of the RT industry in recent years with various kinds of prototype applications, especially in the development of new products. The purpose of this study is to analyze the current application trends of RT techniques in producing hybrid mold inserts.

The direct and indirect RT techniques discussed in this paper are aimed at developing a hybrid mold insert using metal epoxy composite (MEC) in increasing the speed of tooling development and performance. An extensive review of the suitable development approach of hybrid mold inserts, material preparation and filler effect on physical and mechanical properties has been conducted.

Latest research studies indicate that it is possible to develop a hybrid material through the combination of different shapes/sizes of filler particles and it is expected to improve the compressive strength, thermal conductivity and consequently increasing the hybrid mold performance (cooling time and a number of molding cycles).

The number of research studies on RT for hybrid mold inserts is still lacking as compared to research studies on conventional manufacturing technology. One of the significant limitations is on the ways to improve physical and mechanical properties due to the limited type, size and shape of materials that are currently available.

This review presents the related information and highlights the current gaps related to this field of study. In addition, it appraises the new formulation of MEC materials for the hybrid mold inserts in injection molding application and RT for non-metal products.

To compare the capabilities and product quality of four state‐of‐the‐art metal rapid prototyping and manufacturing (RPM) systems. This comparison could help industrial companies to know the advantages and disadvantages of each system and decide which system is the most appropriate for their application field.

This work evaluates and compares the quality of four identical benchmarks fabricated from different metallic powders by using four recently developed RPM systems for metals. The evaluation considers benchmark geometry, dimensional precision, material type, product strength and hardness, surface quality, building speed, materials, operation and running cost.

Results show that using RPM technology for the production of metallic products proved to be successful and promising technology to fabricate high strength products such as dies and molds parts which have complicated geometry and fine features. The best quality and strength was developed by the technique of complete melting of metallic powders (selective laser melting/micro‐welding). Comparing to the technique of selective laser sintering, this gave the impression to be more successful and reliable in future in addition to the ability to prototype different types of metallic powders. However, it was very slow and costly. Results by other techniques were evaluated as well.

The discussed resulted were based only on one benchmark built by each evaluated system and using only one set of processing parameters (which were recommended by the machine manufacturer to be the optimum parameters). However, different results could be obtained if different processing parameters were used. Future work should include the affect of changing the process parameters for each system.

A very useful research study for industrial organizations need to use RPM for the production of metallic products.

This paper provides very important comparison between different state‐of‐the‐art metal RPM systems that are very new to the market. This paper should be very valuable to industrial organizations industrial organizations need to use RPM for the production of metallic products.