Search results

Underactuated fingers are adapted to generate several grasping modes for different tasks, and coupled fingers and self-adaptive fingers are two important types of them. Aiming to expand the application and increase adaptability of robotic hand, this paper aims to propose a novel grasping model, called coupled and indirectly self-adaptive (CISA) grasping model, which is the combination of coupled finger and indirectly self-adaptive finger.

CISA grasping process includes two stages: first, coupled and then indirectly self-adaptive grasping; thus, it is not only integrated with the good pinching ability of coupled finger but also characterized with the high flexibility of indirectly self-adaptive finger. Furthermore, a CISA hand with linkage-slider, called CISA-LS hand, is designed based on the CISA grasping model, consisting of 1 palm, 5 CISA-LS fingers and 14 degrees of freedom.

To research the grasping behavior of CISA-LS hand, kinematic analysis, dynamic analysis and force analysis of 2-joint CISA-LS finger are performed. Results of grasping experiments for different objects demonstrate the high reliability and stability of CISA-LS hand.

CISA fingers integrate two grasping modes, coupled grasping and indirectly self-adaptive grasping, into one finger. And a double-linkage-slider mechanism is designed as the switch device.

This paper presents a method to elaborate the selections of these parameters to achieve stable grasps. The performance of a prosthetic hand is mainly determined by its mechanical design. However, the effects of the geometric parameters of the hand configuration and the object sizes on the grasp stability are unknown.

First, the thumb functions of human hands are analyzed based on the anatomical model, and the configuration characteristics of the thumbs for typical prosthetic hands are summarized. Then a method of optimizing the thumb configuration is proposed by measuring the kinematic transmission performance of robotics. On the basis of the thumb configuration analysis, a design method of the prosthetic hand configuration is proposed based on form closure theory. The discriminant function of form closure is used to analyze and determine the hand configuration parameters.

An application of this method – the newly developed HIT V prosthetic hand – elaborates the optimization of the thumb configuration and the hand configuration, where the relation between the key hand configuration parameters and the discriminant function on condition of satisfying form closure, sustained by analytical equations and graphs, is revealed and visualized. An experimental verification shows that it is an effective method to design the prosthetic hand configuration available for grasping typical objects in our daily life.

The paper shows how to easily determine the geometric dimensions of the palm, phalanges and hand configuration, so that the desired range of object sizes can be obtained.

The purpose of this paper is to present state-of-the-art approaches for precise operation of a robotic manipulator on a macro- to micro/nanoscale.

This paper first briefly discussed fundamental issues associated with precise operation of a robotic manipulator on a macro- to micro/nanoscale. Second, this paper described and compared the characteristics of basic components (i.e. mechanical parts, actuators, sensors and control algorithm) of the robotic manipulator. Specifically, commonly used mechanisms of the manipulator were classified and analyzed. In addition, intuitive meaning and applications of its actuator explained and compared in details. Moreover, related research studies on general control algorithm and visual control that are used in a robotic manipulator to achieve precise operation have also been discussed.

Remarkable achievements in dexterous mechanical design, excellent actuators, accurate perception, optimized control algorithms, etc., have been made in precise operations of a robotic manipulator. Precise operation is critical for dealing with objects which need to be manufactured, modified and assembled. The operational accuracy is directly affected by the performance of mechanical design, actuators, sensors and control algorithms. Therefore, this paper provides a categorization showing the fundamental concepts and applications of these characteristics.

This paper presents a categorization of the mechanical design, actuators, sensors and control algorithms of robotic manipulators in the macro- to micro/nanofield for precise operation.

The subject of the paper is the mechatronic design of a novel robotic hand, cassino-underactuated-multifinger-hand (Ca.U.M.Ha.), along with its prototype and the experimental analysis of its grasping of soft and rigid objects with different shapes, sizes and materials. The paper aims to discuss these issues.

Ca.U.M.Ha. is designed with four identical underactuated fingers and an opposing thumb, all joined to a rigid palm and actuated by means of double-acting pneumatic cylinders. In particular, each underactuated finger with three phalanxes and one actuator is able to grasp cylindrical objects with different shapes and sizes, while the common electropneumatic operation of the four underactuated fingers gives an additional auto-adaptability to grasp objects with irregular shapes. Moreover, the actuating force control is allowed by a closed-loop pressure control within the pushing chambers of the pneumatic cylinders of the four underactuated fingers, because of a pair of two-way/two-position pulse-width-modulation (PWM) modulated pneumatic digital valves, which can also be operated under ON/OFF modes.

The grasping of soft and rigid objects with different shapes, sizes and materials is a very difficult task that requires a complex mechatronic design, as proposed and developed worldwide, while Ca.U.M.Ha. offers these performances through only a single ON/OFF or analogue signal.

Ca.U.M.Ha. could find several practical applications in industrial environments since it is characterized by a robust and low-cost mechatronic design, flexibility and easy control, which are based on the use of easy-running components.

Ca.U.M.Ha. shows a novel mechatronic design that is based on a robust mechanical design and an easy operation and control with high dexterity and reliability to perform a safe grasp of objects with different shapes, sizes and materials.

Adaptive grippers are versatile end effectors that mechanically adapt their shapes to the objects they seize, allowing for soft and delicate grasps while still allowing for strong contact forces if needed and therefore they are well suited for industrial applications. The purpose of this paper is to present a software‐oriented approach to design optimal architectures of linkage‐driven adaptive (often a.k.a underactuated) fingers with three degrees of freedom.

The user of the software presented in this paper can design planar underactuated fingers following defined constraints. The software uses an algorithm able to compute the internal and contact forces generated, respectively, in and by the finger, it is also capable of automating the design of non‐straight links to eliminate mechanical interferences, and includes results from a topological synthesis to generate all possible architectures. The mechanisms are evaluated for many criteria such as the volume of their workspaces, stability, force isotropy, stiffness of their grasps, and compactness.

This article introduces 11 new designs of underactuated fingers for four different usages, and many of these variants are good candidates for a physical realization. One of the interesting results of this work is the recurrence of S3 variants coupled with torque amplifiers or closely resembling designs using many unrelated performance criteria.

This paper is the first, to the best of the authors' knowledge, to investigate the systematic design of underactuated fingers driven by linkages considering not one but dozens of mechanical architectures.

Passively compliant underactuated mechanisms are one way to obtain the gripper which could accommodate to any irregular and sensitive grasping object. The purpose of the underactuation is to use less active inputs than the number of degrees of freedom of the gripper mechanism to drive the open and close motion of the gripper. Another purpose of underaction is to reduce the number of control variables.

The underactuation can morph shapes of the gripper to accommodate different objects. As a result, the underactuated grippers require less complex control algorithms. The fully compliant mechanism has multiple degrees of freedom and can be considered as an underactuated mechanism.

This paper presents a new design of the adaptive underactuated compliant gripper with distributed compliance. The optimal topology of the gripper structure was obtained by optimality criteria method using mathematical programming technique. Afterwards, the obtained model was improved by iterative finite element optimization procedure. The gripper was constructed entirely of silicon rubber.

The main points of this paper are the explanation of the development and production of the new compliant gripper structure.

This paper aims to propose a novel hand to bridge the gap between the traditional rigid robot hands and the soft hands to obtain a better grasping performance.

The proposed hand consists of three fingers. Each finger has 15 degrees of freedom and three phalanxes, which can bend in one direction when load is applied, but they are rigid toward the opposite direction at the initial position. The grasping process and simulations of the fingers are discussed in this paper. Both kinematic and dynamics analyses are performed to predict the performance of the hand. Subsequently, a prototype of the hand is developed for experiments.

Both kinematics and dynamics analyses indicate good grasping performance of the hand. Simulations and experiments confirm the feasibility of the finger design. The hand can execute hybrid grasping modes with more uniform force distribution and a larger workspace than traditional rigid fingers. The proposed hand has much potential in the industrial sector.

A new method to obtain better grasping performance and to bridge the gap between the rigid finger and the soft finger has been presented and verified. The hand combines the advantages of both the rigid phalanxes and the soft fingers. Compared with some traditional rigid fingers, the proposed design has a more uniform force distribution and a bigger workspace.

The purpose of this study is to provide a novel multi-fingered hand made of hyperelastic material. This kind of hand has the advantage of less mechanical parts, simpler control system. It can greatly cut down the complexity and cost of the hands under conditions of ensuring enough flexibility of grasping.

Based on the principle of virtual work, the equations of pulling force and grasping force are derived. To get the max grasping force, the optimal structural dimensions of the hand are obtained by finite element simulations. Hand’s grasping experiment is conducted.

The factors influencing grasping force and grasping stability are identified, and they are the length between short poles around the knuckles and the height of short poles. Experimental results show that the max strain of knuckles is less than the elastic limit of hyperelastic material, and the presented hand is practicable. The adaptive ability and grasping stability of the presented hand are demonstrated.

A novel multi-fingered hand made of hyperelastic material is presented in this paper. By designing the thickness of every section of a hyperelastic plate, the knuckle sections will bend and other sections of the plate will remain straight, and thus, the multi-fingered hand will grasp.

The paper aims to discuss a new design methodology for multi-fingered robotic grippers.

Optimization of the compliant mechanism with underactuation.

A new robotic gripper principle without active control.

Design of multi-fingered robotic gripper as a monolithic structure without joints.

The purpose of this paper is to develop an automated industrial robotic system for handling steel castings of various sizes and shapes in a foundry.

The authors first designed a prismatic gripper for pick-and-place operations that incorporates underactuated passive hydraulic contact (PHC) phalanges that enable the gripper to easily adapt to different casting shapes. The authors then optimized the gripper parameters and compared it to an adaptive revolute gripper using two methods: a planar physics based quasistatic simulation that accounts for object dynamics and validation using physical prototypes on a physical robot.

Through simulation, the authors found that an optimized PHC gripper improves grasp performance by 12 per cent when compared to an human-chosen PHC configuration and 60 per cent when compared to the BarrettHand™. Physical testing validated this finding with an improvement of 11 per cent and 280 per cent, respectively.

This paper presents for the first time optimized prismatic grippers which passively adapt to an object shape in grasping tasks.