Search results

To review the literature and identify research gaps in the role and influence boards of directors of companies have in occupational health and safety (OHS).

This was done in a scoping review built on a structured search in MEDLINE (PubMed), EMBASE, PsycINFO, Sociological Abstracts, CCInfoWeb, EconLit, Web of Science, CINAHL and gray literature. Citations and reference lists were tracked. Inclusion criteria were publication in English. Exclusion criteria were studies covering companies using subcontractors to arrange OHS, or with <250 employees.

Forty-nine studies were included. The majority contained empirical data (n = 28; 57%), some were entirely normative (n = 16; 33%), and a few contained normative claims far beyond empirical data (n = 5; 10%). Empirical studies gave no insight into the scope of impact of board activities on OHS, and no studies assess the causal mechanisms by which board activities influence OHS outcomes. Most studies focused on both health and safety (n = 20; 41%) or only safety (n = 15; 31%). Context might explain the focus on safety rather than health, but is not clearly elucidated by the studies. Several studies are describing leadership behavior, although not framed as such. A narrative summary is presented to facilitate future research.

Future research should include: (1) which board activities influence OHS, (2) how board activities influence OHS, (3) the influence of context and (4) the leadership role of boards of directors.

This study identifies a total lack of research on the basic mechanics of the relationship between boards and OHS.

The paper follows Jason Cope's (2011) vision of a holistic perspective on the failure-based learning process. By analyzing the research since Cope's first attempt, which is often fragmentary in nature, and providing novel empirical insights, the paper aims to draw a new comprehensive picture of all five phases of entrepreneurial learning and their interplay.

The study features an interpretative phenomenological analysis of in-depth interviews with 18 failed entrepreneurs. Findings are presented and discussed in line with experiential learning theory and Cope's conceptual framework of five interrelated learning timeframes spanning from the descent into failure until re-emergence.

The study reveals different patterns of how entrepreneurs experience failure, ranging from abrupt to gradual descent paths, different management and coping behaviors, and varying learning effects depending on the new professional setting (entrepreneurial vs non-entrepreneurial). Analyzing the entrepreneurs' experiences throughout the process shows different paths and connections between individual phases. Findings indicate that the learning timeframes may overlap, appear in different orders, loop, or (partly) stay absent, indicating that the individual learning process is even more dynamic and heterogeneous than hitherto known.

The paper contributes to the field of entrepreneurial learning from failure, advancing Cope's seminal work on the learning process and -contents by providing novel empirical insights and discussing them in the light of recent scientific findings. Since entrepreneurial learning from failure is a complex and dynamic process, using a holistic lens in the analysis contributes to a better understanding of this phenomenon as an integrated whole.

The purpose of this paper is to present a strategic management framework for a successful digital transformation (DT) roll-out aimed at enabling organisational resilience. The study aims to identify the critical areas of consideration for management to strategically approach DT in order to build resilience.

The research study is based on the 3Ps framework: (1) people (culture, capabilities, engagement and well-being), (2) processes (systems) and (3) plant (technological infrastructure and tools). The research methodology is a qualitative study comprising semi-structured in-depth interviews, conducted with industry experts in different sectors undergoing major digital disruptions such as financial services, mining, oil and gas, energy and retail.

The research findings show that the successful roll-out of an organisation’s DT is largely driven by the people elements incorporating organisational culture, workforce skills and training and employee well-being. It also highlights that it is critical for organisations to invest in technological infrastructure, once the people elements have been addressed, as they are the drivers of technology implementation.

A bigger and broader sample size can validate the elements and structure of the DT framework in South Africa.

The study’s discussion unlocks understanding about: (1) what are the key enablers for successful DT; (2) what hinders organisations from realising the value of digital investments and (3) a strategic framework for the digital roll-out.

Technology is impacting employees at both a personal and professional levels. Ensuring that DT rollouts are strategical implemented lowers the impact on technostress and strengthens resilience.

The value and practical implication of this study is that the developed strategic framework can be used by managements to enable the smooth adoption of DT toward building organisational resilience in developing countries such as South Africa with low digital maturity.

In his 1943 paper “A Theory of Human Motivation”, Maslow suggested the “Hierarchy of Needs” as a classification system that described the stimuli for human behaviour. Presently, project behaviour research, which inspired this work, encourages undertaking research on behavioural aspects within and across organisational and project settings. Therefore, the purpose of this paper is to analyse project-based organisations’ (PBOs) seemingly reluctance in engaging in organisational learning from past project failures by drawing upon both institutional theory (since it focuses on how firms interact) and Maslow’s model within a project behaviour piece of research.

Interviews were held with purposively selected construction professionals from the UK construction industry, and data were analysed using thematic analysis.

Besides the need to learn from failures, PBOs’ main competing needs revolve around their “competitiveness”; “profitability and productivity”; “repeat business” and “reputation and partnering”. Mirroring these needs against Maslow’s hierarchy of needs, “competitiveness” and “profitability” are analogous to foundational “physiological” and “safety” needs. The need for “repeat business” and “reputation” is approximated with Maslow’s “affiliation” and “self-esteem” needs, and organisational learning is associated with “self-actualisation”. From an institutional theory perspective, such response to failure is influenced by the need to show legitimacy and conformity imposed by institutional factors.

Instead of taking a simplified approach to learning from failure such as the use of technological tools, PBOs and the sector at large should consider more robust approaches, by appreciating the influence of institutional factors and the external environment on their efforts to learn from failure.

Unlike past studies that present organisational learning within PBOs as a straightforward process, this study instead highlights the need of understanding various competing needs within a PBO and the external pressure.

Laser sintering of polyamide lattice-based lightweight fairing components for subsequent racetrack testing requires a high quality and a reliable design. Hence, the purpose of this study was to develop a design methodology for such additively manufactured prototypes, considering efficient generation and structural simulation of boundary conformal non-periodic lattices, optimization of production parameters as well as experimental validation.

Multi-curved, sandwich structure-based demonstrators were designed, simulated and experimentally tested with boundary conformal lattice cells. The demonstrator’s non-periodic lattice cells were simplified by forward homogenization processes. To represent the stiffness of the top and bottom face sheet, constant isotropic and mapped transversely isotropic simulation approaches were compared. The dimensional accuracy of lattice cells and demonstrators were measured with a gauge caliper and a three-dimensional scanning system. The optimized process parameters for lattice structures were transferred onto a large volume laser sintering system. The stiffness of each finite element analysis was verified by an experimental test setup including a digital image correlation system.

The stiffness prediction of the mapped was superior to the constant approach and underestimated the test results with −6.5%. Using a full scale fairing the applicability of the development process was successfully demonstrated.

The design approach elaborated in this research covers aspects from efficient geometry generation over structural simulation to experimental testing of produced parts. This methodology is not only relevant in the context of motor sports but is transferrable for all additively manufactured large scale components featuring a complex lattice sub-structure and is, therefore, relevant across industries.

In this paper we examine the validity of the J-curve hypothesis in four Southeast Asian economies (Indonesia, Malaysia, the Philippines and Thailand) over the 1980–2017 period.

We employ the linear autoregressive distributed lags (ARDL) model that captures the dynamic relationships between the variables and additionally use the nonlinear ARDL model that considers the asymmetric effects of the real exchange rate changes.

The estimated models were diagnostically sound, and the variables were found to be cointegrated. However, with the exception of Malaysia, the short- and long-run relationships did not attest to the presence of the J-curve effect. The trade flows were affected asymmetrically in Malaysia and the Philippines, suggesting the appropriateness of nonlinear ARDL in these countries.

The previous research tended to examine the effects of the real exchange rate changes on the agricultural trade balance and specifically the J-curve effect (deterioration of the trade balance followed by its improvement) in the developed economies and rarely in the developing ones. In this paper, we address this omission.

This study analyzed three years of data from the Collegiate Leadership Competition to investigate potential differences in longitudinal leader self-efficacy growth between students who identify as men and those who identify as women.

Survey design.

Results indicate that women participants enter their competition experience at higher levels of leader self-efficacy than men and that both groups were able to sustain moderate levels of growth measured several months after the end of the competition.

The gap between men and women in their leader self-efficacy did not change over the several months of measurement. Implications for leadership educators are discussed.

The authors derive the necessary mathematics, provide computer simulations, provide links to free and user-friendly computer programs, and analyze real data sets.

Cohen's d, which indexes the difference in means in standard deviation units, is the most popular effect size measure in the social sciences and economics. Not surprisingly, researchers have developed statistical procedures for estimating sample sizes needed to have a desirable probability of rejecting the null hypothesis given assumed values for Cohen's d, or for estimating sample sizes needed to have a desirable probability of obtaining a confidence interval of a specified width. However, for researchers interested in using the sample Cohen's d to estimate the population value, these are insufficient. Therefore, it would be useful to have a procedure for obtaining sample sizes needed to be confident that the sample. Cohen's d to be obtained is close to the population parameter the researcher wishes to estimate, an expansion of the a priori procedure (APP). The authors derive the necessary mathematics, provide computer simulations and links to free and user-friendly computer programs, and analyze real data sets for illustration of our main results.

In this paper, the authors answered the following two questions: The precision question: How close do I want my sample Cohen's d to be to the population value? The confidence question: What probability do I want to have of being within the specified distance?

To the best of the authors’ knowledge, this is the first paper for estimating Cohen's effect size, using the APP method. It is convenient for researchers and practitioners to use the online computing packages.

Outsourcing is recognized as one of the critical factors for efficient execution of pharmaceutical supply chain management (PSCM), and many pharmaceutical companies engage in international outsourcing of services (IOS) to survive in global highly competitive business. Since the key success factors for both domestic & international alliances are partnership characteristics and strategic fit management, but there is no empirical research on this issue in Thai pharmaceutical partnership offshore outsourcing. Therefore, this survey of Thai and foreign companies, both contract providers (CPs) and contract manufacturers (CMs), seeks to indicate significant relationships among both outsourcing strategic fit and partnership types, including outsourcing performance outcome. This research is two-fold. First, the partnership types (Type I, II, & III), the strategic fit types (low fit, moderate fit, and good fit), and their correlations are analyzed. And second, their outsourcing performance (company revenues and growth rates) are presented. The results showed that the most of the Thai pharmaceutical outsourcing manufacturing are classified as the partnership Type II, as well as the moderate strategic fit, and strongly support the relationship between the two models. Both of the companies’ revenue and growth rate could predict the companies’ performances outcome for each of partnership and strategic fit types. However, it is not necessary that the most integrative type of partnership, Type III, will be always the best, because it depends also on the strategic fit between each pair of partners as well.

Relational contracting is increasingly being applied to complex and uncertain construction projects. However, it has proved hard to achieve stable performance and industry-level learning in this field. This paper employs an institutional perspective to analyze how legitimacy for relational contracting has been produced and challenged in Denmark, Finland, Norway and Sweden, including implications for dissemination and learning.

A collaborative case study design is used, where longitudinal accounts of the developments in relational contracting over more than 25 years in four Nordic countries were developed by scholars based in each country. The descriptions are underpinned by literature sources from research, practice and policy.

The countries share similar problem perceptions that have triggered the de-institutionalization of traditional contracting practices. Models and policies developed elsewhere are important sources of knowledge and legitimacy. Most countries have seen pendulum movements, where dissemination of relational contracting is followed by backlashes when projects fail to meet projected outcomes. Before long, however, relational contracting tends to re-emerge under new labels and in slightly new forms. Such a proliferation of concepts presents further obstacles to learning. Successful institutionalization is found to rely on realistic goals in combination with broad competence development at the organizational and industry levels.

In seeking inspiration from other countries, policymakers should go beyond contract models to also consider strategies to manage industry-level learning.

The paper provides a unique longitudinal cross-country perspective on the field of relational contracting. As such, it contributes to the small stream of literature on long-term institutional change in the construction sector.