Search results

In order to improve the computation efficiency of the four-point rainflow algorithm, a new fast four-point rainflow cycle counting algorithm (FFRA) using a novel loop iteration mode is proposed.

In this new algorithm, the loop iteration mode is simplified by reducing the number of iterations, tests and deletions. The high efficiency of the new algorithm makes it a preferable candidate in fatigue life online estimation of structural health monitoring systems.

The extensive simulation results show that the extracted cycles by the new FFRA are the same as those by the four-point rainflow cycle counting algorithm (FRA) and the three-point rainflow cycle counting algorithm (TRA). Especially, the simulation results indicate that the computation efficiency of the FFRA has improved an average of 12.4 times compared to the FRA and an average of 8.9 times compared to the TRA. Moreover, the equivalence of cycle extraction results between the FFRA and the FRA is proved mathematically by utilizing some fundamental properties of the rainflow algorithm. Theoretical proof of the efficiency improvement of the FFRA in comparison to the FRA is also given.

This merit makes the FFRA preferable in online monitoring systems of structures where fatigue life estimation needs to be accomplished online based on massive measured data. It is noticeable that the high efficiency of the FFRA attributed to the simple loop iteration, which provides beneficial guidance to improve the efficiency of existing algorithms.

To redesign the spare parts (MRO) inventory management at Company XYZ's warehouse, considering the conditions after the COVID-19 pandemic.

To address this research project, the authors integrated three methodologies: action research, Lean Six Sigma (DMAIC) and Cross Industry Standard Process for Data Mining. These methodologies integrated the Lean Six Sigma (LSS) 4.0 framework applied in this project.

The spare parts inventory value was reduced by 15%, and inventory turnover increased by 120% without negatively impacting the internal service level.

Practitioners leading or participating in continuous improvement projects (CIPs) should consider data quality (data available and data trustworthiness), problem-solving approach and target area involvement to achieve CIP goals. Otherwise, the LSS 4.0 could fail or extend its duration by several weeks or months.

This project shows the importance of controlling a target area before deciding to conduct a LSS 4.0 project. To address this problem, the LSS 4.0 team implemented 5S during the measure phase of the DMAIC. Also, this project offers significant practitioner and theoretical contributions to the body of knowledge about LSS 4.0.

The study delves into the influence of wear cycles on these parameters. The purpose of this paper is to identify characteristic patterns of σ_RS and ε_PEEQ that discern varying wear situations, thereby contributing to the enrichment of wear theory. Furthermore, the findings serve as a foundational basis for nondestructive and in situ wear detection methodologies, such as nonlinear ultrasonic detection, known for its sensitivity to σ_RS and ε_PEEQ.

This paper elucidates the wear mechanism through the lens of residual stress (σ_RS) and plastic deformation within distinct fretting regimes, using a two-dimensional cylindrical/flat contact model. It specifically explores the impact of the displacement amplitude and cycles on the distribution of residual stress and equivalent plastic strain (ε_PEEQ) in both gross slip regime and partial slip regimes.

Therefore, when surface observation of wear is challenging, detecting the σ_RS trend at the center/edge, region width and ε_PEEQ distribution, as well as the maximum σ_RS distribution along the depth, proves effective in distinguishing wear situations (partial or gross slip regimes). However, discerning wear situations based on ε_PEEQ along the depth direction remains challenging. Moreover, in the gross slip regime, using σ_RS distribution or ε_PEEQ along the width direction rather than the depth direction can effectively provide feedback on cycles and wear range.

This work introduces a novel perspective for investigating wear theory through the distribution of residual stress (σ_RS) and equivalent plastic strain (ε_PEEQ). It presents a feasible detection theory for wear situations using nondestructive and in situ methods, such as nonlinear ultrasonic detection, which is sensitive to σ_RS and ε_PEEQ.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-01-2024-0005/

Organisations and industries are often looking for technologies that can accomplish multiple tasks, providing economic benefits and an edge over their competitors. In this context, drones have the potential to change many industries by making operations more efficient, safer and more economic. Therefore, this study investigates the use of drones as the next step in smart/digital warehouse management to determine their socio-economic benefits.

The study identifies various enablers impacting drone applications to improve inventory management, intra-logistics, inspections and surveillance in smart warehouses through a literature review, a test of concordance and the fuzzy Delphi method. Further, the graph theory matrix approach (GTMA) method was applied to ranking the enablers of drone application in smart/digital warehouses. In the subsequent phase, researchers investigated the relation between the drone application's performance and the enablers of drone adoption using logistic regression analysis under the TOE framework.

This study identifies inventory man agement, intra-logistics, inspections and surveillance are three major applications of drones in the smart warehousing. Further, nine enablers are identified for the adoption of drone in warehouse management. The findings suggest that operational effectiveness, compatibility of drone integration and quality/value offered are the most impactful enablers of drone adoption in warehouses. The logistic regression findings are useful for warehouse managers who are planning to adopt drones in a warehouse for efficient operations.

This study identifies the enablers of drone adoption in the smart and digital warehouse through the literature review and fuzzy Delphi. Therefore, some enablers may be overlooked during the identification process. In addition to this, the analysis is based on the opinion of the expert which might be influenced by their field of expertise.

By considering technology-organisation-environment (TOE) framework warehousing companies identify the opportunities and challenges associated with using drones in a smart warehouse and develop strategies to integrate drones into their operations effectively.

This study proposes a TOE-based framework for the adoption of drones in warehouse management to improve the three prominent warehouse functions inventory management, intra-logistics, inspections and surveillance using the mixed-method.

After completion of the case study, the students will be able to understand ABC analysis and develop a systematic approach using PDCA, analyze processes, technology, employee training and supplier relationships when analyzing shrink and developing solutions, evaluate how technology improves production inventory control and visibility and recognize the importance of fostering a culture of employee accountability and ownership to minimize inventory loss and improve overall operational efficiency.

On June 2, 2023, sitting in his office in Karachi, Pakistan, Khan Aamir, the manager of store and inventory at Euro Manufacturing, found himself immersed in a cloud of confusion. The incessant loss of inventory items, particularly the nut bolts and small accessories, had become a perplexing challenge. To address these losses and provide a cycle count report to the director of supply chain, Aamir, manager of store and inventory, was given the responsibility to take action. He was looking for a comprehensive approach to address the current problems and prevent further losses in the future. This case study examines the various reasons for the losses, including theft, inadequate inventory control methods, human error and problems with suppliers. It highlights the importance of established procedures, the use of technology (such as barcode scanning, radio-frequency identification tagging and inventory management software) and the cultivation of a culture of accountability among employees.

This case study is developed for class discussion in the course of operations management or supply chain management. This case study is suitable for use with undergrad students. This case study can be taught in a module on operations management or supply chain management, as part of a broader course in business management or industrial engineering.

Teaching notes are available for educators only.

CSS: 9: Operations and logistics.

This paper aims to assess the combined application of Lean Six Sigma and agile approach for optimizing operational processes of order management in the seed industry.

This study is based on an action research case conducted in a multinational Brazilian Seeds Business enterprise. This paper reports on the application of the Lean Six Sigma define-measure-analyze-improve-control (DMAIC), using the steps of DMAIC cycle as a sprint of agile approach. The methodology involves outlining an operational process through sequential activities, each associated with a cycle time, equivalent number of full-time employee and number of orders. Performance metrics for the order management process include continuous monitoring of these activities, using monitoring systems, management software and manual records to collect data.

The findings reveal significant improvements in critical-to-quality measures related to customer care, planning and logistics. The implementation of the DMAIC methodology and agile approach resulted in tangible enhancements in cycle time, defects per opportunities and overall process efficiency. The results allow the classification of defects, the identification of their causes and, consequently, the presentation of a control plan to mitigate these problems. Furthermore, the study identifies key causes of operational issues and proposes a prioritized action plan.

The limitation of this research is its restriction to a single case. The external validity of the results and generalizability to other organizational contexts may be compromised due to the lack of case diversity. The fact that the research focuses on a single company, even if it is a large multinational company, may limit the applicability of the findings to different sectors, sizes and organizational structures, which may be an opportunity for future research.

The findings suggest that the integrated approach of DMAIC and agile methodology contributes to a culture of continuous improvement and operational efficiency. The systematic collection and analysis of data enhance evidence-based decision-making, providing a robust foundation for strategic and operational choices. Moreover, the successful integration of methodologies presents a comprehensive framework applicable to diverse organizational challenges.

The paper applies action research to understand and address operational challenges, emphasizing practical solutions. The integration of DMAIC and agile enhances the depth of process analysis, enabling the identification, implementation and control of improvements. This study offers a significant contribution both to practitioners, providing practical implications, and to academics, enriching the Lean Six Sigma and agile body of knowledge.

This paper aims to present the novel stacked machine learning approach (SMLA) to estimate low-cycle fatigue (LCF) life of SAC305 solder across structural parts. Using the finite element simulation (FEM) and continuous damage mechanics (CDM) model, a fatigue life database is built. The stacked machine learning (ML) model's iterative optimization during training enables precise fatigue predictions (2.41% root mean square error [RMSE], R² = 0.975) for diverse structural components. Outliers are found in regression analysis, indicating potential overestimation for thickness transition specimens with extended lifetimes and underestimation for open-hole specimens. Correlations between fatigue life, stress factors, nominal stress and temperature are unveiled, enriching comprehension of LCF, thus enhancing solder behavior predictions.

This paper introduces stacked ML as a novel approach for estimating LCF life of SAC305 solder in various structural parts. It builds a fatigue life database using FEM and CDM model. The stacked ML model iteratively optimizes its structure, yielding accurate fatigue predictions (2.41% RMSE, R² = 0.975). Outliers are observed: overestimation for thickness transition specimens and underestimation for open-hole ones. Correlations between fatigue life, stress factors, nominal stress and temperature enhance predictions, deepening understanding of solder behavior.

The findings of this paper highlight the successful application of the SMLA in accurately estimating the LCF life of SAC305 solder across diverse structural components. The stacked ML model, trained iteratively, demonstrates its effectiveness by producing precise fatigue lifetime predictions with a RMSE of 2.41% and an “R²” value of 0.975. The study also identifies distinct outlier behaviors associated with different structural parts: overestimations for thickness transition specimens with extended fatigue lifetimes and underestimations for open-hole specimens. The research further establishes correlations between fatigue life, stress concentration factors, nominal stress and temperature, enriching the understanding of solder behavior prediction.

The authors confirm the originality of this paper.

This study examines the carbon emissions of Australia’s agriculture, forestry and fishing sectors from a consumption perspective to develop effective policy frameworks. The objective is to identify key supply chains, industries and products contributing to these emissions and provide recommendations for sustainable development.

A multiregional input-output lifecycle assessment was conducted using the Australian Industrial Ecology Virtual Laboratory (IELab) platform to disaggregate sectors and enable benchmarking against other economic sectors.

In 2018, the “agriculture, forestry, and fishing” sector was responsible for 12.15% of Australia’s carbon footprint. Major contributors included the “electricity, gas, water, and waste” category (26.1%) and the sector’s activities (24.3%). The “transport, postal, and warehousing” sector also contributed 18.4%. Within the industry, the agriculture subsector had the highest impact (71.3%), followed by forestry and logging (15%) and fishing, hunting and trapping (7.6%). Aquaculture and supporting services contributed 6.1%.

The principal constraint encountered by the present study pertained to the availability of up-to-date data. The latest accessible data for quantifying the carbon footprint within Australia’s agriculture, forestry and fishing sector, utilizing the Input-Output analysis methodology through the Australian Industrial Ecology Virtual Laboratory (IELab) platform, about 2018.

The findings of this study provide policymakers with detailed insights into the carbon footprints of key sectors, highlighting the contributions from each subsector. This information can be directly used to develop effective emission-reduction policies, with a focus on reducing emissions in utility services, transport and warehousing.

The study, by raising public awareness of the significant role of industrial agricultural methods in Australia’s carbon footprint and emphasizing the importance of renewable energy and sustainable fuels for electricity generation and road transport, underscores the urgent need for action to mitigate climate change.

This study stands out by not only identifying the most impactful industries but also by providing specific strategies to reduce their emissions. It offers a comprehensive breakdown of specific agricultural activities and outlines mitigation strategies for utility services, agricultural operations and transport, thereby adding a unique perspective to the existing knowledge.

This study investigates the fitting techniques for notch fatigue curves, seeking a more reliable method to predict the lifespan of welded structures.

Building on the fatigue test results of butt and cruciform joints, this research delves into the selection of fitting methods for the notch fatigue curve of welded joints. Both empirical formula and finite element methods (FEMs) were employed to assess the notch stress concentration factor at the toe and root of the two types of welded joints. Considering the mean stress correction and weld misalignment coefficients, the notch fatigue life curves were established using both direct and indirect methods.

An engineering example was employed to discern the differences between the direct and indirect approaches. The findings highlight the enhanced reliability of the indirect method for fitting the fatigue life curve.

While the notch stress approach is extensively adopted due to its accurate prediction of component fatigue life, most scholars have overlooked the importance of its curve fitting methods. Existing literature scantily addresses the establishment of these curves. This paper offers a focused examination of fatigue curve fitting techniques, delivering valuable perspectives on method selection.

Devices for step estimation are body-worn devices used to compute steps taken and/or distance covered by the user. Even though textiles or clothing are foremost to come to mind in terms of articles meant to be worn, their prominence among devices and systems meant for cadence is overshadowed by electronic products such as accelerometers, wristbands and smart phones. Athletes and sports enthusiasts using knee sleeves should be able to track their performances and monitor workout progress without the need to carry other devices with no direct sport utility, such as wristbands and wearable accelerometers. The purpose of this study thus is to contribute to the broad area of wearable devices for cadence application by developing a cheap but effective and efficient stride measurement system based on a knee sleeve.

A textile strain sensor is designed by weft knitting silver-plated nylon yarn together with nylon DTY and covered elastic yarn using a 1 × 1 rib structure. The area occupied by the silver-plated yarn within the structure served as the strain sensor. It worked such that, upon being subjected to stress, the electrical resistance of the sensor increases and in turn, is restored when the stress is removed. The strip with the sensor is knitted separately and subsequently sewn to the knee sleeve. The knee sleeve is then connected to a custom-made signal acquisition and processing system. A volunteer was employed for a wearer trial.

Experimental results establish that the number of strides taken by the wearer can easily be correlated to the knee flexion and extension cycles of the wearer. The number of peaks computed by the signal acquisition and processing system is therefore counted to represent stride per minute. Therefore, the sensor is able to effectively count the number of strides taken by the user per minute. The coefficient of variation of over-ground test results yielded 0.03%, and stair climbing also obtained 0.14%, an indication of very high sensor repeatability.

The study was conducted using limited number of volunteers for the wearer trials.

By embedding textile piezoresistive sensors in some specific garments and or accessories, physical activity such as gait and its related data can be effectively measured.

To the best of our knowledge, this is the first application of piezoresistive sensing in the knee sleeve for stride estimation. Also, this study establishes that it is possible to attach (sew) already-knit textile strain sensors to apparel to effectuate smart functionality.