Search results

Composites based on fiber are commonly used in high-performance building materials. The composites mostly use petrochemically derived fibers like polyester and e-glass, due to their advantageous material features like high stiffness and strength. All the same, these fibers also have important shortcomings related to energy consumption, recyclability, initial processing expense, resulting health hazards, and sustainability. Increasing environmental awareness and new sustainable building technologies are driving the research, development, and usage of “green” building materials, especially the development of biomaterials.

In this chapter, the natural fiber evaluation approach is applied, which covers a diverse set of criteria. Consequently, the comparative assessment of diverse natural fiber types is applied through the use of an expert decision system approach. The best performing fiber choice is made by comparatively evaluating the materials related to green building. The proposed fiber can be used and applied by green building material manufacturing companies in various countries or locations as a reference when selecting the fiber with the best performance.

Purpose – This purpose of the research is to investigate the process of manufacturing LDPE recycle thermoplastic composites with reinforcement oil palm empty fruit bunch (OPEFB) biomass microfillers.

Design/Methodology/Approach – Methods of physical and chemical modification of OPEFB fibers into the LDPE matrix and the addition of some compatibilizer such as MAPE and xylene process through melt blending can improve mechanical properties, electrical properties, biodegradability, and improve the morphology of composites.

Research Limitations/Implications – These composites are prepared by the following matrix ratio: filler (70:30)% and filler size (63, 75, 90, and 106) μm. The LDPE plastic is crushed to a size of 0.5–1 cm, then pressed with hot press free heating for 5 min and with a pressure of 10 min at 145 °C. Based on the characterization obtained, the tensile strength and the high impact on the use of 106 μm filler is 13.86 MPa and 3,542.6 J/m², and thermal stability indicates the degradation temperature (T₀) 497.83 °C. FT-IR analysis shows the presence of functional groups of cellulose and lignin molecules derived from TKKS collected in the composite.

Practical Implications – Based on the characterization obtained, this composite can be applied as furniture material and vehicle dashboard.

Originality/Value – Composites obtained from recycle of LDPPE plastics waste has some advantages such as good compatibility and high tensile strength. This composite used the OPEFB filler whose size is in micrometer, and so this product is different from other products.

Purpose – The purpose of the chapter is to sketch the historical and evolutionary development of the Wichita Aircraft Manufacturing Cluster from inception to present and provide a descriptive narrative of aircraft industry knowledge spillovers currently driving effort to establish a Medical Device Manufacturing Cluster. The chapter illustrates how carbon-fiber composite materials knowledge and technology developed for use in the aviation industry is facilitating the creation and growth of medical device manufacturing.

Methodology/approach – We use an historical case study approach to trace the development of the aircraft cluster in the Wichita, KS metropolitan area. A number of technologies are identified that had initially been adopted by one firm but eventually diffused through other firms in the local cluster and ultimately throughout the industry.

Findings – In addition to providing examples of within industry knowledge spillovers, we provide an example of technology-based knowledge that is diffusing through the aircraft manufacturing industry and is now being used as the basis for establishing an unrelated industry manufacturing cluster. The use of carbon-fiber composites in aircraft manufacturing has diffused from one manufacturer to many in the industry. Subsequently, the knowledge base surrounding carbon-fiber composite materials is being used in a local R&D effort to create a second manufacturing cluster producing medical devices ranging from surgical instruments to joint-replacement implants.

Originality/value of paper – The chapter illustrates a unique example of a manufacturing cluster, intra-industry knowledge spillovers, and inter-industry knowledge spillovers to create a new manufacturing cluster.

The consideration of alternative sources of material for construction is imperative to reduce the environmental impacts as two-fifths of the carbon footprint of materials is attributed to the construction industry. One alternative material with improved biodegradable attributes which can contribute to carbon offset is bamboo. The commercialisation of bamboo in modern infrastructures has significant potential to address few of the Sustainable Development Goals (SDGs) itemised by the United Nations, namely SDG 9 about industry, innovation and infrastructure. Other SDGs covering sustainable cities and communities, responsible consumption and production and climate action are also indirectly addressed when utilising sustainable construction materials. Being a natural material however, the full commercialisation of materials such as bamboo is constrained by a lack of durability. Besides fracture mechanisms arising from load-induced cracks and thermal modification, the durability of bamboo material is greatly impaired by biotic and abiotic factors, which equally affect its natural rate of degradation, hence fracture behaviour. In first instance, this chapter outlines the various factors leading to the durability limitations in bamboo material due to load-induced cracks and natural degradation based on recent findings in this field from the author's own work and from past literature. Secondly, part of this chapter is devoted to a new approach of processing the surge of information about the varied aspects of bamboo durability by considering the powerful technique of artificial intelligence (AI), specifically the artificial neural network (ANN) for prediction modelling. Further use of AI-enabled technologies could have an impactful outcome on the life cycle assessment of bamboo-based structures to address the growing challenges outlined by the United Nations.

Composite slabs are gaining wide acceptance in many countries as they lend themselves to faster, lighter and more economic in construction buildings. The strength of composite slabs system relies on the bonding action between the concrete and the steel deck, the shear connections and the cross-sectional resistance of steel beam. However, structural behaviour of composite slab is a complex phenomenon and therefore experimental study is often conducted to establish the actual strength of the structure under ultimate load capacity. The main objective of this study is to determine the structural behaviour of composite slab system until ultimate limit state. Total of two specimens are examined in order to obtain failure mechanism of the composite structure under full load capacity. A new design approach of composite slab for roofing system are proposed in this study to construct a composite slab system that can float in the water but not wash away by flood. The lightweight materials in this composite construction are cold-formed steel and foam concrete. The system focuses on the concept of Industrialised building system (IBS) to reduce the cost and construction time.

Every year, tens of millions of the 1.4 billion cars on the world’s roads are decommissioned. While the ferrous and other metals that constitute about 75% of a vehicle by weight can be readily and profitably recycled, the remaining mix of plastics, glass, composites, complex materials, fragments and contaminants are mainly destined for landfill as automotive shredder residue (ASR). For every car, approximately 100–200 kg of ASR is disposed of in landfill, posing a growing technical and environmental challenge worldwide. The recovery of the ASR for high-end application is the focus of this study, aiming to optimise the use of these valuable resources and minimise the extractive pressure for raw materials, a future green manufacturing, contributing towards a zero waste circular economy. As the dissolution of carbon into iron is a key step in the manufacture of iron-carbon alloys, the feasibility of utilizing the waste polymers within ASR as sources of carbon in different areas of pyrometallurgical processing was investigated. Polypropylene and rubber, in a blend with metallurgical coke, were used as carbonaceous substrates and the slag-foaming phenomenon was investigated via the sessile drop technique in an argon environment at 1,550°C. The results indicated the rubber/coke blend achieved significantly better foaming behaviour, and the PP/coke blend exhibited a moderate improvement in slag foaming, in comparison to 100% metallurgical coke. The overall results indicated the incorporation of ASR had significant improvement in foaminess behaviour, increasing furnace efficiency.

Due to the increasing size and complexity of construction projects, construction engineering and management involves the coordination of many complex and dynamic processes and relies on the analysis of uncertain, imprecise and incomplete information, including subjective and linguistically expressed information. Various modelling and computing techniques have been used by construction researchers and applied to practical construction problems in order to overcome these challenges, including fuzzy hybrid techniques. Fuzzy hybrid techniques combine the human-like reasoning capabilities of fuzzy logic with the capabilities of other techniques, such as optimization, machine learning, multi-criteria decision-making (MCDM) and simulation, to capitalise on their strengths and overcome their limitations. Based on a review of construction literature, this chapter identifies the most common types of fuzzy hybrid techniques applied to construction problems and reviews selected papers in each category of fuzzy hybrid technique to illustrate their capabilities for addressing construction challenges. Finally, this chapter discusses areas for future development of fuzzy hybrid techniques that will increase their capabilities for solving construction-related problems. The contributions of this chapter are threefold: (1) the limitations of some standard techniques for solving construction problems are discussed, as are the ways that fuzzy methods have been hybridized with these techniques in order to address their limitations; (2) a review of existing applications of fuzzy hybrid techniques in construction is provided in order to illustrate the capabilities of these techniques for solving a variety of construction problems and (3) potential improvements in each category of fuzzy hybrid technique in construction are provided, as areas for future research.