Search results

The purpose of this paper is to investigate the effects of the finite element models on the response of a free surface or a floating roof, which is important for safety assessment of oil storage tanks.

Structural analyses of shell structures using the three‐dimensional finite element method (FEM), potential flow analyses by FEM, and fluid‐structure interaction analyses by strong coupling of the structural and fluid analyses were performed. In‐house software was utilized for computations shown in this paper except the solver for non‐symmetric sparse matrix.

A model with a rigid tank and an elastic roof was confirmed to be able to perform the seismic response analysis most effectively from the viewpoint of computational cost with no reduction in accuracy.

The stress distribution on the floating roof will be evaluated to assess the safety of oil storage tanks subjected to seismic waves in the future research.

This paper shows the dynamic responses of a liquid storage tank subjected to seismic motion using four different analysis models and the results were compared. It was concluded that a model with a rigid tank and an elastic roof can perform the seismic response analysis most effectively from the viewpoint of both accuracy and computational cost.

The purpose of this research is to propose a flexible sensor with a weft-knitted float stitch structure and to explore knitting techniques that allow conductive yarns to be skin-tight and less exposed, reducing production processes and increasing productivity. Study its electrical conductivity in different yarn materials, knit processes and deformation ranges. The analysis is compared to provide some basis for the design of the electrodes.

The method includes five operations: (1) Analysis of the morphological appearance, tensile variation, fiber material properties and electrical conductivity of high-elastic and filament silver-plated conductive yarns. (2) Based on the knitting process of the floating yarn structure, three-dimensional modeling of the flexible sensor was carried out to explore the influence of knitting process changes on appearance characteristics. (3) The fabric samples are knitted by different silver-plated conductive yarns with different structures. Processing of experimental samples to finished size by advance shrinkage. (4) Measure the resistance of the experimental sample after the machine has been lowered and after pre-shrinking. Use the stretching machine to simulate a wearing experiment and measure the change in resistance of the sample in the 0–15% stretching range. (5) Analyze the influence factors on the conductive performance of the flexible sensor to determine whether it is suitable for textile flexible sensors.

For the float knitted flexible sensors, the floating wire projection is influenced by the elasticity of the fabric and the length of the floating wire. Compared to the plain knitted flexible sensors, it has less resistance variation and better electrical properties, making it suitable for making electrodes for textile structures. In addition, the knitting method is integrated with the intelligent monitoring clothing, which saves the process for the integration of the flexible sensor, realizes positioning and fixed-point knitting.

The sensor technology of the designed weft-knitted float structure is varied and can be freely combined and designed in a wide range. Within the good electrical conductivity, the flexible sensor can realize integrated knitting, positioning monitoring, integrating into the appearance of clothing. It can also focus on the wearing experience of wearable products so that the appearance of the monitoring clothing is close to the clothes we wear in our daily life.

In this paper, an integrated positioning knitting flexible sensor based on the weft knitting float structure is studied. The improved knitting process allows the sensing contact surface to be close to the skin and reduces the integration process. The relationship between the exposure of the silver-plated yarn on the clothing surface and the electrical conductivity is analyzed. Within a certain conductive performance, reduces the exposed area of the conductive yarn on the clothing surface and proposes a design reference for the flexible sensor appearance.

The purpose of this paper is to analyze and improve the lubrication performance of a floating cylindrical seal by investigating micro spiral groove.

The lubrication model of is solved by finite difference, considering the influence of convergence eccentricity and Rayleigh step on the gas film period. A lubrication model, which is a gas film of floating microgroove cylindrical seal, is solved under high-precision central difference (finite-difference method-center) for the critical problems of convergence eccentricity and Rayleigh step. And then, an idea on the opening-leakage ratio is proposed, and a multiobjective optimization model is established. Finally, an experiment is conducted on a narrow gap to determine the gas film opening force and leakage by the modules of testing system, and the theoretical results are verified by real tests.

The theoretical calculation results agree well with the experimental data, which proves the correctness of the lubrication optimization model, and the optimized groove has better lubrication performance. On the other hand, the sealing pressure plays a more important role in the seal operation.

The theoretical model carries out low complexity and high sparseness, thus being very suitable for large-scale gas film problems. A multiobjective optimal function is established based on the opening-leakage ratio for optimizing groove. Finally, a curved groove of high precision and gas film opening force is obtained completely.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-02-2020-0048/

This paper aims to investigate how different knitted structures affect the illuminative effect of polymeric optical fibres (POFs).

Knit prototypes were constructed using a 7-gauge industrial hand flat knitting machine. The textile prototype swatches developed in this study tested POF illumination in three types of knitting structures: intervallic knit and float stitch structures; POF inlaid into double plain and full cardigan structures; and double plain and partial knitting structures. The illuminative effects of the POFs in seven prototype swatches were analysed and compared.

It is possible to use an industrial hand flat knitting machine to knit POFs. Longer floats expose more POFs, which boosts illumination but limits the textile’s horizontal stretchability. The openness of the full cardigan structure maximises POF exposure and contributes to even illumination. The partial knitting in different sections achieves the most complete physical integration of POFs into the knitted textiles but constrains the horizontal stretchability of the textiles.

The integration of POFs into knitted textiles provides a functional illuminative effect. Applications include but are not limited to fashion, architecture and interior design.

This study is novel, as it investigates new POF knitted textiles with different loop structures. This study examines how knit stitches affect POFs in intervallic knit and float stitch, inlaid POF double knit, double plain and partial knit and the illuminative effects of the knitted textile.

In this article the requirement leading to the design is discussed and this is followed by a general description of the aircraft and its operating efficiency. The accommodation is described, with particular reference to the flight deck and equipment. The various systems and installations are next reviewed; followed by a detailed description of the various structural components, which, in many cases, have been designed round these systems. The development work that has been done in order to allow design and construction to be completed will be described in some detail in a later article.

This research aims to investigate the effects of manipulation of a torpedo’s geometries to attain higher terminal velocity. The parameters of interest include geometric changes of the original design, as well as sea water properties that reflect water depth in South China Sea.

The research make use of computational fluid dynamics (CFD) software, FLUENT, to solve viscous incompressible Navier–Stokes equations with two equations k-epsilon turbulent model. The calculated drag coefficient is subsequently used to calculate the maximum attainable terminal velocity of the torpedo.

It was found that the terminal velocity can be improved by sharper tip angle, greater aspect ratio, greater diameter ratio and optimum rear angle at 30°. Sensitivity of drag coefficient toward each of the parameters is established in this paper.

The paper, in addition to verifying the importance of aspect ratio, has also established the tip angle, diameter ratio and rear angle of the torpedo as important geometric aspects that could be tuned to improve its terminal velocity.

This study aims to propose a numerical modeling procedure for response analysis of elastic body floating in water and submitted to regular waves. An equivalent simplified mechanical single-degree-of-freedom system allowing to reproduce the heave movements is first developed, then the obtained lumped characteristics are used for elastic analysis of the floating body in heave motion.

First, a two-dimensional numerical model of a rigid floating body in a wave tank is implemented under DualSPHysics, an open source computational fluid dynamics (CFD) code based on smoothed particle hydrodynamics method. Then, the obtained results are exploited to derive an equivalent mechanical mass-spring-damper model. Finally, estimated equivalent characteristics are used in a structural finite element modeling of the considered body assuming elastic behavior.

Obtained results concerning the floating body displacements are represented and validated using existing experimental data in the literature. Wave forces acting on the body are also evaluated. It was found that for regular waves, it is possible to replace the complex CFD refined model by an equivalent simplified mechanical system which makes easy the use of structural finite element analysis.

The originality of this work lies in the proposed procedure to evaluate the mechanical properties of the equivalent elastic system. This allows to couple two different software tools and to take advantages of their features.

This paper aims to identify how non-financial firms manage their interest rate (IR) exposure. IR risk is complex, as it comprises the unequal cash flow and fair value risk. The paper is able to separate both risk types and investigate empirically how the exposure is composed and managed, and whether firms increase or decrease their exposure with derivative transactions.

The paper examines an unexplored regulatory environment that contains publicly reported IR exposure data on the firms’ exposures before and after hedging. The data were complemented by indicative interviews with four treasury executives of major German corporations, including two DAX-30 firms, to include professional opinions to validate the results.

The paper provides new empirical insights about how non-financial firms manage their interest rate exposure. It suggests that firms use hedging instruments to swap from fixed- to floating-rate positions predominantly in the short-to medium-term, and that 63 [37] per cent of IR firm exposure are managed using risk-decreasing [risk-increasing/-constant] strategies.

Interviewed treasury executives suggest that the advanced disclosures benefit various stakeholders, ranging from financial analysts and shareholders to potential investors through more meaningful analyses on firms’ risk management activities. Further, the treasury executives indicate that the new data granularity would enable firms to carry out unprecedented competitive analyses and thereby benchmark and improve their own risk management.

The paper is the first empirical study to analyze the interest rate activities of non-financial firms based on actually reported exposure data before and after hedging, rather than using proxy variables. In addition, the new data granularity enables a separate analysis of the cash flow and fair value risk to focus on the non-financial firms’ requirements.

A method for non‐linear static and dynamic analysis of flexible systems submerged in water is outlined. The systems considered here include cable and beam elements, as well as buoys and clump weights. Contact and lift‐off between members and the sea floor is also accounted for. The formulation used allows for very large deformations and material non‐linearities. Hydrostatic buoyancy and hydrodynamic drag forces are considered throughout the analyses. These capabilities have been implemented in the general purpose non‐linear finite element program FENRIS. Aspects concerning efficient solution of the non‐linear static and dynamic equations are discussed. In particular, an efficient start‐up procedure for analysis of highly flexible systems is described. The paper shows applications involving static and dynamic analysis of a floating structure kept in place by six mooring lines and a flexible riser system.