Search results

The purpose of this paper is to present a Design for Additive Manufacturing (DfAM) methodology that connects several methods, from geometrical design to post-process selection, into a common optimisation framework.

A design methodology is formulated and tested in a case study. The outcome of the case study is analysed by comparing the obtained results with alternative designs achieved by using other design methods. The design process in the case study and the potential of the method to be used in different settings are also discussed. Finally, the work is concluded by stating the main contribution of the paper and highlighting where further research is needed.

The proposed method is implemented in a novel framework which is applied to a physical component in the case study. The component is a structural aircraft part that was designed to minimise weight while respecting several static and fatigue structural load cases. An addition goal is to minimise the manufacturing cost. Designs optimised for manufacturing by two different AM machines (EOS M400 and Arcam Q20+), with and without post-processing (centrifugal finishing) are considered. The designs achieved in this study show a significant reduction in both weight and cost compared to one AM manufactured geometry designed using more conventional methods and one design milled in aluminium.

The method in this paper allows for the holistic design and optimisation of components while considering manufacturability, cost and component functionality. Within the same framework, designs optimised for different setups of AM machines and post-processing can be automatically evaluated without any additional manual work.

This paper aims to review recent research in design for additive manufacturing (DfAM), including additive manufacturing (AM) terminology, trends, methods, classification of DfAM methods and software. The focus is on the design engineer’s role in the DfAM process and includes which design methods and tools exist to aid the design process. This includes methods, guidelines and software to achieve design optimization and in further steps to increase the level of design automation for metal AM techniques. The research has a special interest in structural optimization and the coupling between topology optimization and AM.

The method used in the review consists of six rounds in which literature was sequentially collected, sorted and removed. Full presentation of the method used could be found in the paper.

Existing DfAM research has been divided into three main groups – component, part and process design – and based on the review of existing DfAM methods, a proposal for a DfAM process has been compiled. Design support suitable for use by design engineers is linked to each step in the compiled DfAM process. Finally, the review suggests a possible new DfAM process that allows a higher degree of design automation than today’s process. Furthermore, research areas that need to be further developed to achieve this framework are pointed out.

The review maps existing research in design for additive manufacturing and compiles a proposed design method. For each step in the proposed method, existing methods and software are coupled. This type of overall methodology with connecting methods and software did not exist before. The work also contributes with a discussion regarding future design process and automation.

Adopting additive manufacturing (AM) on a large-scale requires an adoption in company value chains. This may happen through product innovation and require interorganizational cooperation, but the value-adding potential of cooperation and application recognition is still poorly understood. This study aims to investigate the progress of AM adoption in innovation projects featuring AM application recognition and interorganizational cooperation in the value chain.

A multiple-case study was implemented in successful metallic AM adoption examples to increase the understanding of AM adoption in value chains. Primary data were collected through interviews and documents in three AM projects, and the data were analyzed qualitatively.

All three AM projects showed evidence of successful AM value chain adoption. Identifying the right application and the added value of AM within it were crucial starting points for finding new value chains. Interorganizational collaboration facilitated both value-based designs and experimentation with new supply chains. Thereby, the focal manufacturing company did not need to invest in AM machines. The key activities of the new value chain actors are mapped in the process of AM adoption.

The cases are set in a business-to-business context, which narrows the transferability of the results. As a theoretical contribution, this paper introduces the concept of AM value chain adoption. The value-adding potential of AM is identified, and the required value-adding activities in collaborative innovation are reported. As a practical implication, the study reveals how companies can learn of AM and adopt AM value chains without investing in AM machines. They can instead leverage relationships with other companies that have the AM knowledge and infrastructure.

This paper introduces AM value chain adoption as a novel, highly interactive phase in the industry-wide adoption of metallic AM. AM value chain adoption is characterized in multi-company collaboration settings, which complements the single-company view dominant in previous research. Theory elaboration is offered through merging technology adoption with external integration from the information processing view, emphasizing the necessity of interorganizational cooperation in AM value chain adoption. Companies can benefit each other during AM adoption, starting with identifying the value-creating opportunities and applications for AM.

This study aims to extend the known design guidelines for the polymer-based fused filament fabrication (FFF) 3D printing process with the focus on function-integrated components, specifically optomechanical parts. The potential of this approach is demonstrated by manufacturing function-integrated optomechanics for a low-power solid-state laser system.

For the production of function-integrated additively manufactured optomechanics using the FFF process, essential components and subsystems have been identified for which no design guidelines are available. This includes guidelines for integrating elements, particularly optics, into a polymer structure as well as guidelines for printing functional threads and ball joints. Based on these results, combined with prior research, a function-integrated low-power solid-state laser optomechanic was fabricated via the FFF process, using a commercial 3D printer of the type Ultimaker 3. The laser system's performance was assessed and compared to a reference system that employed commercial optomechanics, additionally confirming the design guidelines derived from the study.

Based on the design goal of function integration, the existing design guidelines for the FFF process are systematically extended. This success is demonstrated by the fabrication of an integrated optomechanic for a solid-state laser system.

Based on these results, scientists and engineers will be able to use the FFF process more extensively and benefit from the possibilities of function-integrated manufacturing.

Extensive research has been published on additive manufacturing of optomechanics. However, this research often emphasizes only cost reduction and short-term availability of components by reprinting existing parts. This paper aims to explore the capabilities of additive manufacturing in the production of function-integrated components to reduce the number of individual parts required, thereby decreasing the workload for system assembly and leading to an innovative production process for optical systems. Consequently, where needed, it provides new design guidelines or extends existing ones and verifies them by means of test series.

The emergence of distributed manufacturing (DM) is examined as a new form of localised production, distinct from previous manifestations of multi-domestic and indigenous production.

Supply network (SN) configuration and infrastructural provisioning perspectives were used to examine the literature on established localised production models as well as DM. A multiple case study was then undertaken to describe and explore the DM model further. A maximum variation sampling procedure was used to select five exemplar cases.

Three main contributions emerge from this study. First, the research uniquely brings together two bodies of literature, namely SN configuration and infrastructure provisioning to explore the DM context. Second, the research applies these theoretical lenses to establish the distinctive nature of DM across seven dimensions of analysis. Third, emerging DM design rules are identified and compared with the more established models of localised production, drawing on both literature and DM case evidence.

This study provides a rich SN configuration and infrastructural provisioning view on DM leading to a set of design rules for DM adoption, thus supporting practitioners in their efforts to develop viable DM implementation plans.

The authors contribute to the intra- and inter-organisational requirements for the emerging DM context by providing new perspectives through the combined lenses of SN configuration and infrastructural provisioning approaches.

This study aims to examine factors that determine the adoption of additive manufacturing by small- and medium-sized industries. It provides insights with regard to benefits, challenges and business factors that influence small- and medium-sized industries when adopting this technology. The study also aims to expand the domain of additive manufacturing by including a broader range of challenges and benefits of additive manufacturing in literature.

Using data collected from 175 small- and medium-sized industries, the study has examined through Mann–Whitney test to understand the difference between owners and design engineers on additive manufacturing technology adoption in small- and medium-sized companies.

This study suggests contribution to academic discussion by providing associated factors that have significant impact on the adoption of additive manufacturing technology. Related advantages of additive manufacturing are reduction in inventory cost, lowering the wastage in production and customization of products. The study also indicates that factors such as cost of machinery, higher level of cost in integrating metal components have a negative impact on the adoption of this technology in small- and medium-sized industries.

Because of the chosen research approach, the research results may lack generalizability. Therefore, researchers are encouraged to test the proposed propositions further in the field of challenges and growth in other areas of application of additive manufacturing, for instance, medical sciences, fabric and aerospace.

The study provides important implications that are of interest for both research and practitioners, related to technology management in small- and medium-sized industries, e.g. foundry and machining industries.

This work/study fulfills an identified need of the small- and medium-sized companies in adopting new technologies and contribute to their growth by understanding the need to accept and implement technology.

This paper fulfills an identified need to study how small- and medium-scale companies accept new technologies and factors associated with implementation in the manufacturing process of the organization.

An Autodesk Ember three-dimensional (3D) printer was used to print optical components from Clear PR48 photocurable resin. The cured PR48 was characterized by the per cent of light transmitted and the index of refraction, which was measured with a prism spectrometer. Lenses and diffraction gratings were also printed and characterized. The focal length of the printed lenses agreed with predictions based on the thin lens equation. The periodicity and effective slit width of the printed gratings were determined from both optical micrographs and fits to the Fraunhofer diffraction equation. This study aims to demonstrate the advantages offered by a layer-by-layer DLP printing process for the manufacture of optical components for use in the visible region of the electromagnetic spectrum.

A 3D printer was used to print both lenses and diffraction gratings from Standard Clear PR48 photocurable resin. The manufacturing process of the lenses and the diffraction gratings differ mainly in the printing angle with respect to the printer x-y-axes. The transmission diffraction gratings studied here were manufactured with nominal periodicities of 10, 25 and 50 µm. The aim of this study was to optically determine the effective values for the distance between slits, d, and the effective width of the slits, w, and to compare these values with the printed layer thickness.

The normalized diffraction patterns measured in this experiment for the printed gratings with layer thickness of 10, 25 and 50 µm are shown by the solid dots in Figures 8(a)-(c). Also shown as a red solid line are the fits to the experimental diffraction data. The effective values of d and w obtained from fitting the data are compared to the nominal layer thickness of the printed gratings. The effective distance between slits required to fit the diffraction patterns are well approximated by the printed layer thickness to within 14, 4 and 16 per cent for gratings with a nominal 10, 25 and 50 µm layer thickness, respectively.

Chromatic aberration is present in all polymer lenses, and the authors have not attempted to characterize it in this study. These materials could be used for achromatic lenses if paired with a crown-type material in an achromatic doublet configuration, because this would correct the chromatic aberration issues. It is worthwhile to compare the per cent transmission in cured PR48 resin (approximately 80 per cent) to the percent transmission found in common optical materials like BK7 (approximately 92 per cent) over the visible region. The authors attribute the lower transmission in PR48 to a combination of surface scattering and increased absorption. At the present time, the authors do not know what fraction of the lower transmission is related to the surface quality resulting from sample polishing.

There are inherent limitations to the 3D manufacturing process that affect the performance of lenses. Approximations to a curved surface in the design software, the printing resolution of the Autodesk Ember printer and the anisotropy due to printing in layers are believed to be the main issues. The performance of the lenses is also affected by internal imperfections in the printed material, in particular the presence of bubbles and the inclusion of debris like dust or fibers suspended in air. In addition, the absorption of wavelengths in the blue/ultraviolet produces an undesirable yellowing in any printed part.

One of the most interesting results from this study was the manufacture of diffraction gratings using 3D printing. An analysis of the diffraction pattern produced by these printed gratings yielded estimates for the slit periodicity and effective slit width. These gratings are unique because the effective slit width fills the entire volume of the printed part. This aspect makes it possible to integrate two or more optical devices in a single printed part. For example, a lens combined with a diffraction grating now becomes possible.

Exoskeletons are mechanical structures that humans can wear to increase their strength and endurance. The purpose of this paper is to explain how exoskeletons can be used to improve performance across five phases of manufacturing.

Multivocal literature review, encompassing scientific literature and the grey literature of online reports, etc., to inform comprehensive, comparative and critical analyses of the potential of exoskeletons to improve manufacturing performance.

There are at least eight different types of exoskeletons that can be used to improve human strength and endurance in manual work during different phases of production. However, exoskeletons can have the unintended negative consequence of reducing human flexibility leading to new sources of musculoskeletal disorders (MSD) and accidents.

Findings are relevant to function allocation research concerned with manual production work. In particular, exoskeletons could exacerbate the traditional trade-off between human flexibility and robot consistency by making human workers less flexible.

The introduction of exoskeletons requires careful health and safety planning if exoskeletons are to improve human strength and endurance without introducing new sources of MSD and accidents.

The originality of this paper is that it provides detailed information about a new manufacturing technology: exoskeletons. The value of this paper is that it provides information that is comprehensive, comparative and critical about exoskeletons as a potential alternative to robotics across five phases of manufacturing.

Construction suffers from “peculiarities” that concern the temporary natures of the construction site, project teams and unique product design. Considering the digital transformation of construction, new solutions are being investigated that can provide consistent data between changing projects. One such source of data manifests in the tracking of logistics activities across the supply chain. Construction logistics is traditionally considered a site management activity focused solely on the “back end” of projects, but an expanded logistics focus can unlock new avenues of improvement. This study aims to understand the requirements and benefits of such a consistent thread of data.

From a research project with one of Australia’s largest contracting companies, this paper details a series of construction tracking tests as an empirical case study in using Bluetooth low energy aware tracking technology to capture data across the manufacture, delivery and assembly of a cross-laminated timber structural prototyping project.

The findings affirm the tracking of expanded logistics data can improve back-end performance in subsequent projects while also demonstrating the opportunity to inform a project’s unique front-end design phase. The case study demonstrates that as the reliability, range and battery life of tracking technologies improve, their incorporation into a broader range of construction activities provides invaluable data for improvement across projects.

As a live case study, this research offers unique insights into the potential of construction tracking to close the data loop from final site assembly back to the early project design phase, thus driving continual improvement from a holistic perspective.

This paper aims to introduce a novel method for the analysis of open cell porous components fabricated by laser-based powder bed metal additive manufacturing (AM) for the purpose of quality control. This method uses photogrammetric analysis, the extraction of geometric information from an image through the use of algorithms. By applying this technique to porous AM components, a rapid, low-cost inspection of geometric properties such as material thickness and pore size is achieved. Such measurements take on greater importance, as the production of porous additive manufactured orthopaedic devices increases in number, causing other, slower and more expensive methods of analysis to become impractical.

Here the development of the photogrammetric method is discussed and compared to standard techniques including scanning electron microscopy, micro computed tomography scanning and the recently developed focus variation (FV) imaging. The system is also validated against test graticules and simple wire geometries of known size, prior to the more complex orthopaedic structures.

The photogrammetric method shows an ability to analyse the variability in build fidelity of AM porous structures for use in inspection purposes to compare component properties. While measured values for material thickness and pore size differed from those of other techniques, the new photogrammetric technique demonstrated a low deviation when repeating measurements, and was able to analyse components at a much faster rate and lower cost than the competing systems, with less requirement for specific expertise or training.

The advantages demonstrated by the image-based technique described indicate the system to be suitable for implementation as a means of in-line process control for quality and inspection applications, particularly for high-volume production where existing methods would be impractical.