Search results

The purpose of this paper, on innovative design of traditional weft-backed woven fabric, is to investigate a design principle and method for full-backed structure with double-faced shading effect to realize two types of double-faced shading effects for traditional weft-backed fabric that are impossible to be realized under plane design mode. In addition, the study on the color rendering law is conducive to the design application, and the effectiveness of the design method has been verified by the design practices.

This paper presents a design method for full-backed structure with two shaded weave databases (SWDs) by selecting two primary weaves (PWs), establishing the corresponding SWDs, selecting the proper compound structures for database of full-backed structure with double-faced shading effect. Color card fabric with 544 specimens is produced and their color values are measured, their color difference and variance are analyzed to evaluate the color rendering characteristics. Finally, double-faced weft-backed fabrics are produced under layered-combination design mode to verify the practicality of full-backed structure with double-faced shading effect.

Weft-backed woven fabrics with “SPDC” (same pattern and different color) and “DPDC” (different pattern and different color) shading effects can be produced using full-backed structure with double-faced shading effect. The color expression is extremely enhanced (136 compound structures on one side for one color weft). In the shading process, two sets of wefts do not affect each other, and stable and ideal color shading effect with high color purity can be expressed according to the analyses on the L* (lightness) values, color purity, color differences (0.47–3.20) and variance (0.25–1.21) of the color card fabric.

Breaking through the structural limitations and achieving the double-faced shading effects that cannot be expressed in plane design mode. The research on two weft-backed fabric with the most basic weft-backed structure provides not only a theoretical base for further study on weft-backed structures, but also some references for structure innovation design of traditional weft-backed woven fabrics.

The application of colour for an improved presentation of 3‐D structures with finite elements is reported. Also shown is how the hidden‐surface technique can be used for: (1) generating pictures in the hidden line alike mode, (2) generating photo‐alike pictures by shading the surfaces according to Lambert's cosine law, (3) showing the regions of different materials or properties by distinct colouring, (4) the presentation of temperature and stress fields by colouring. This colouring is done with smooth colour transitions and delivers pictures similar to those gained by thermography or stress optics. Furthermore, (5) it is possible to generate contour lines on the remaining visible surfaces. The problems arising with the attachment of a colour hardcopier are also considered.

The construction industry produces voluminous quantitative data. Much of this data is created during the controls phase of projects and relates to cost, schedule, and administrative information. Recent storage and processing advances in computers as well as display capabilities afforded by computer graphics increase the opportunity to monitor projects fundamentally different from existing project control systems. However, changes in project control methods have been slow to evolve. The lack of a fundamental model of project control data representation contributes to the inadequate application and implementation of visual tools in project control methods. Difficulties associated with the graphical representation of data can be traced to the diversity of skills required in creating visual information displays. Owing to the reality that not all engineers/constructors possess these attributes in great strength, streamlining the process of how to best visualize data is important. Visual representations of data hold great potential for reducing communication difficulties fostered by industry fragmentation. However, without information structure, organization, and visual explanations, the massive amount of data available to project managers results in information overload. Therefore, improved information displays are needed to overcome the possibility of information overload with the capability of human perception. This paper discusses research to create a framework for visual representation of construction project data. Underlying visualization theory, the visual framework, and a detailed implementation are provided.

The purpose of this paper is to develop a set of affordable retrofit packages that can be applied to existing residential buildings in hot-humid regions to improve occupants’ thermal comfort and reduce energy consumption.

A critical review of relevant literature to identify passive design strategies for improving thermal comfort and reducing energy consumption in hot-humid climates with focus on the building envelope was conducted in addition to a simulation study of an existing building typology in study area.

There is enormous potential to reduce energy costs and improve thermal comfort through building retrofit packages which is a recent concept in developing countries, such as Nigeria. Analysing the results of the retrofit interventions using building energy simulation helped in developing affordable retrofit packages which had optimum effect in improving indoor comfort temperature to the neutral temperature specified for hot humid Nigeria and further down to 3°C less than that of the reference building used. The use of passive design strategies to retrofit the building might help homeowners reduce their annual energy consumption by up to 46.3 per cent just by improving the indoor thermal comfort.

In addition to improving thermal comfort and reducing energy consumption, this research identified affordable retrofit packages and considered its cost implications especially to low-income earners who form a larger population of Lagos, Nigeria, as this was not considered by many previous researchers.

The paper aims to the preparation of novel disperse dye based on azo salicylaldehyde derivatives TF-A [2-hydroxy-5-((3-(trifluoromethyl)phenyl)diazenyl)benzaldehyde] and full evaluation of their use as disperse dye TF-ASC [bis 2-hydroxy-5-((3-(trifluoromethyl)phenyl)diazenyl)benzaldehyde Schiff base with 4,4'-methylenedianiline] for dyeing polyester fabric at various conditions.

The dispersed dye was synthesized via Schiff base condensation in the presence of ceric ammonium nitrate cerium ammonium nitrate 10 mmole% as an eco-friendly catalyst at room temperature. The chemical structure of the prepared dye was characterized via elemental analysis, Fourier-transform infrared spectroscopy, 1H- and 13 C-NMR spectroscopic analysis tools. This study thoroughly examined the dyeing of disperse dye TF-ASC on polyester at various conditions. The characteristics of dyed polyester fabric were measured by colour measurements, as well as light, washing, crock fastness and finally, colour strength. The discrete fourier transform (DFT) theoretical studies, including E_HOMO, E_LUMO and optimized geometrical structure, were assumed and discussed in detail.

The results showed that the synthesized organic dye TF-ASC was highly functional and appropriate for this kind of dyeing method. The dyeing fabrics obtained from disperse dye TF-ASC, properties possess high colour strength as well as good overall fastness properties. These dyes had a high affinity for polyester fabric, with just a tiny change in dye affinity when the pH was changed, even under alkaline circumstances. The dye levelness and shade depth of the colour results were good, and there were a variety of hues from light brownish yellow to deep brownish yellow. The results obtained from DFT computational studies such as E_HOMO, E_LUMO, optimized structure, diploe moment µ and electrophilicity index deduced that prepared organic dye TF-ASC is more applicable as a dispersed dye.

This research is significant because it provides a new dye for dyeing polyethylene terephthalate fibres with exceptional brightness and levelness; the method of preparation is a useful pathway due to its being known as a green chemistry method.

Data visualizations in some form or another have served as decision-support tools for many centuries. In conjunction with advancements in information technology, data visualizations have become more accessible and more efficient to generate. In fact, virtually all enterprise resource planning and human resource (HR) information system vendors offer off-the-shelf data visualizations as part of decision-support dashboards as well as stand-alone images and displays for reporting. Plus, advances in programing languages and software such as Tableau, Microsoft Power BI, R, and Python have expanded the possibilities of fully customized graphics. Despite the proliferation of data visualization, relatively little is known about how to design data visualizations for displaying different types of HR data to different user groups, for different purposes, and with the overarching goal of improving the ways in which users comprehend and interpret data visualizations for decision-making purposes. To understand the state of science and practice as they relate to HR data visualizations and data visualizations in general, we review the literature on data visualizations across disciplines and offer an organizing framework that emphasizes the roles data visualization characteristics (e.g., display type, features), user characteristics (e.g., experience, individual differences), tasks, and objectives (e.g., compare values) play in user comprehension, interpretation, and decision-making. Finally, we close by proposing future directions for science and practice.

Color Maker is a computer simulation of mixing colorants to generate a resultant true colour on screen. It can be described as the infinite shade card. It has obvious advantages to offer the paint coatings and printing ink industries, which are defined. However, applications can be made for Color Maker in all colour‐using industries. An example is given of its development as an accurate tool in determining true colours on pharmaceutical tablet coatings. Here, it evaluates the colour on the tablet in a three‐dimensional rendering of the colour, and produces what can be termed a three‐dimensional shade card.

Describes a new method of instrumental shade sorting, Clemson Colour Clustering (CCC), which has been developed to address the deficiencies associated with the 555 method and its derivatives. CCC has been shown to produce fewer colour groups at a given colour tolerance with greater colorimetric uniformity within each group than 555. CCC has been implemented in co‐operation with Tanner Companies, Inc. to develop a practical system for colour inventory management. Identifies three distinct benefits and developments. First, the CCC system in conjunction with the CMC (2:1) colour difference formula has proved extremely useful in the establishment of objective criteria for setting colour tolerances. Secondly, the CCC method has been enhanced to permit multiple colour measurements from a single roll of goods (e.g. side‐centre‐side). Finally, the CCC method has been combined with a procedure for choosing rolls to satisfy yardage requirements for a cut which does not fragment the remaining colour inventory.

In nature, thousands of different colours and shades exist. Basic set of dyes, namely, yellow, red, blue and green are necessary for a complete colour gamut. Creating a complete gamut with natural dyes with one common extraction and application procedure is not exploited hitherto. The paper aims to discuss this issue.

In this study, an attempt was made to create a complete colour gamut with easily available natural dyes with one common extraction and application procedure.

Silk fabrics were dyed using various natural dyes alone and in combination to yield various shades, namely, yellow, red, green, blue. Pre-mordanting of silk fabrics was carried out with mordants, namely, alum, ferrous sulphate, copper sulphate, stannous chloride, potassium dichromate followed by dyeing. The fastness properties and colour strength values of all the shades obtained were determined.

Creating a complete gamut with natural dyes with one common extraction and application procedure is not exploited hitherto.

There is a saying that all roads leads to Rome. This applies certainly to the tinting of dispersion colours, because there are many possible ways of arriving at a particular shade of colour.