Search results

This study aims to assess the use of variational quantum imaginary time evolution for solving partial differential equations using real-amplitude ansätze with full circular entangling layers. A graphical mapping technique for encoding impulse functions is also proposed.

The Smoluchowski equation, including the Derjaguin–Landau–Verwey–Overbeek potential energy, is solved to simulate colloidal deposition on a planar wall. The performance of different types of entangling layers and over-parameterization is evaluated.

Colloidal transport can be modelled adequately with variational quantum simulations. Full circular entangling layers with real-amplitude ansätze lead to higher-fidelity solutions. In most cases, the proposed graphical mapping technique requires only a single bit-flip with a parametric gate. Over-parameterization is necessary to satisfy certain physical boundary conditions, and higher-order time-stepping reduces norm errors.

Variational quantum simulation can solve partial differential equations using near-term quantum devices. The proposed graphical mapping technique could potentially aid quantum simulations for certain applications.

This study shows a concrete application of variational quantum simulation methods in solving practically relevant partial differential equations. It also provides insight into the performance of different types of entangling layers and over-parameterization. The proposed graphical mapping technique could be valuable for quantum simulation implementations. The findings contribute to the growing body of research on using variational quantum simulations for solving partial differential equations.

Purpose – The purpose of this research is to to determine the value of land erodibility in Krueng Seulimum watershed.

Design/Methodology/Approach – This research apply survey method and field measurement that begins with making land unit map.

Findings – The results showed that Krueng Seulimum watershed consisted of 22 units of land (LU). The value of land erodibility in secondary forest land use is low, i.e., 0.13–0.19 (LU 13 and 22), the value of land erodibility in grazing lands land use is medium, i.e., 0.31–0.32 (LU 9 and 11 ), the value of land erodibility in scrub lands land use is rather high, i.e., 0.33–0.35 (LU 2, 6, 12, 15, and 19) and the value of land erodibility in dry land agriculture land use is medium – rather high, i.e., 0.28–0.35 (LU 3, 7, 10, and 16).

Research Limitations/Implications – The land use directions for scrub lands is for cocoa-based mixed crops, such as cocoa monoculture, cocoa + areca nut, and cocoa +banana.

Practical Implications – The use of dry land agriculture is maintained for land use coupled with agrotechnology action that is guludan terrace plus mulsa application.

Originality/Value – Most of the soil in the Krueng Seulimum watershed has very low soil fertility level that affects nutrient availability plant. These characteristics should be considered in the direction of land use in the Krueng Seulimum watershed.

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

This study aims to examine the metal pollution in coastal sediment in the Peninsular Malaysia.

Approximately 141 published studies were screened from 1,285 documents and reviewed to determine the existing pollution status in the coastal areas of Peninsular Malaysia and the metals under review were Pb, Hg, Cd, Ar, Cu, Zn, Cr and Ni. Sources of pollutants and their effect on biological systems, marine organisms and human health were addressed in this review as well as recommendation of heavy metal removal or remedies in short. Emphasis is placed on marine pollution, particularly on the toxic metal accumulation in biota.

This study has revealed the different concentrations of pollutants, low, moderately, and chronically contaminated areas from heavy metals and the consequences to aquatic ecosystem and indirectly to human health, since an increasing in the coastal developments in Peninsular Malaysia.

This study has revealed the different concentrations of pollutants, low, moderately, and chronically contaminated areas from heavy metals and the consequences to aquatic ecosystem and indirectly to human health, since an increasing in the coastal developments in Peninsular Malaysia.

The purpose of this paper is to prepare stabile emulsions with 0–15% of colloidal silica and high monomer/water ratio and to investigate the influence of silica addition and surface modification on the polyacrylate properties.

Improving the properties of the composite can be achieved by optimizing the compatibility between the phases of the composite system with improving the interactions at the matrix/filler interface. Therefore, the silica surface was modified with nonionic emulsifier octylphenol ethoxylate, cationic initiator 2,2'-azobis-(amidinopropane dihydrochloride) and 3-methacryloxypropyltrimethoxysilane and polyacrylate/silica nanocomposites were prepared via in situ emulsion polymerization. Particle size distribution, rheological properties of the emulsions and morphology, thermal properties and mechanical properties of the film prepared from the emulsions were investigated.

Polyacrylate/silica systems with unmodified silica, silica modified with nonionic emulsifier and cationic initiator have micrometer, while pure PA matrix and systems with silica modified with silane have nanometer particle sizes. Addition and surface modification of the filler increased emulsion viscosity. Agglomeration of silica particles in composites was reduced with silica surface modification. Silica filler improves thermal stability and tensile strength of polyacrylate.

This paper provides broad spectrum of information depending on filler surface modification and latex preparation via in situ emulsion polymerization and properties with high amount of filler and monomer/water ratio with the aim that prepared latex is suitable for film formation and final application.

This paper aims to present a requirements analysis for the processing of water-based electrode dispersions in inkjet printing.

A detailed examination of the components and the associated properties of the electrode dispersions has been carried out. The requirements of the printing process and the resulting performance characteristics of the electrode dispersions were analyzed in a top–down approach. The product and process side were compared, and the target specifications of the dispersion components were derived.

Target ranges have been identified for the main component properties, balancing the partly conflicting goals between the product and the process requirements.

The findings are expected to assist with the formulation of electrode dispersions as printing inks.

Little knowledge is available regarding the particular requirements arising from the systematic qualification of aqueous electrode dispersions for inkjet printing. This paper addresses these requirements, covering both product and process specifications.

This study aims to develop an experimentally validated three-dimensional numerical model for predicting different flow patterns produced with a gas dynamic virtual nozzle (GDVN).

The physical model is posed in the mixture formulation and copes with the unsteady, incompressible, isothermal, Newtonian, low turbulent two-phase flow. The computational fluid dynamics numerical solution is based on the half-space finite volume discretisation. The geo-reconstruct volume-of-fluid scheme tracks the interphase boundary between the gas and the liquid. To ensure numerical stability in the transition regime and adequately account for turbulent behaviour, the k-ω shear stress transport turbulence model is used. The model is validated by comparison with the experimental measurements on a vertical, downward-positioned GDVN configuration. Three different combinations of air and water volumetric flow rates have been solved numerically in the range of Reynolds numbers for airflow 1,009–2,596 and water 61–133, respectively, at Weber numbers 1.2–6.2.

The half-space symmetry allows the numerical reconstruction of the dripping, jetting and indication of the whipping mode. The kinetic energy transfer from the gas to the liquid is analysed, and locations with locally increased gas kinetic energy are observed. The calculated jet shapes reasonably well match the experimentally obtained high-speed camera videos.

The model is used for the virtual studies of new GDVN nozzle designs and optimisation of their operation.

To the best of the authors’ knowledge, the developed model numerically reconstructs all three GDVN flow regimes for the first time.

In the developing field of nano-materials synthesis, copper oxide nanoparticles (NPs) are deemed to be one of the most significant transition metal oxides because of their intriguing characteristics. Its synthesis employing green chemistry principles has become a key source for next-generation antibiotics attributed to its features such as environmental friendliness, ease of use and affordability. Because they are more environmentally benign, plants have been employed to create metallic NPs. These plant extracts serve as capping, stabilising or hydrolytic agents and enable a regulated synthesis as well.

Organic chemical solvents are harmful and entail intense conditions during nanoparticle synthesis. The copper oxide NPs (CuO-NPs) synthesised by employing the green chemistry principle showed potential antitumor properties. Green synthesised CuO-NPs are regarded to be a strong contender for applications in the pharmacological, biomedical and environmental fields.

The aim of this study is to evaluate the anticancer potential of CuO-NPs plant extracts to isolate and characterise the active anticancer principles as well as to yield more effective, affordable, and safer cancer therapies.

This review article highlights the copper oxide nanoparticle's biomedical applications such as anticancer, antimicrobial, dental and drug delivery properties, future research perspectives and direction are also discussed.

Based on DNase I and reduced graphene oxide (rGO)-magnetic silicon microspheres (MNPS), a highly sensitive and selective fluorescent probe for the detection of PD-L1 was developed.

Here °C we present a feasibility of biosensor to detection of PD-L1 in lung tumors plasma. In the absence of PD-L1°C the PD-L1 aptamer is absorbed on the surface of graphene oxide modified magnetic nanoparticles °8rGO-MNPS°9 and leading to effective fluorescence quenching. Upon adding PD-L1°C the aptamer sequences could be specifically recognized by PD-L1 and the aptamer/PD-L1 complex is formed°C resulting in the recovery of quenched fluorescence.

This sensor can detect PD-L1 with a linear range from 100 pg mL⁻¹ to 100 ng mL⁻¹, and a detection limit of 10 pg•m⁻¹ was achieved.

This method provides an easy and sensitive method for the detection of PD-L1 and will be beneficial to the early diagnosis and prognosis of tumors.

This paper aims to the identification of journal articles that probably report on interdisciplinary research at Wageningen University & Research (WUR).

For identification of interdisciplinary research, an analysis is performed on journals from which articles have been cited in articles (co-)authored by WUR staff. The journals with cited articles are inventoried from the reference lists of the WUR articles. For each WUR article, a mean dissimilarity is calculated between the journal in which it has been published and the journals inventoried from the reference lists. Dissimilarities are derived from a large matrix with similarity values between journals, calculated from co-occurrence of these journals in the WUR articles’ reference lists.

For 21,191 WUR articles published between 2006 and 2015 in 2,535 journals mean dissimilarities have been calculated. The analysis shows that WUR articles with high mean dissimilarities often are published in multidisciplinary journals. Also, WUR articles with high mean dissimilarities are found in non-multidisciplinary (research field-specific) journals. For these articles (with high mean dissimilarities), this paper shows that citations are often made to more various research fields than for articles with lower mean dissimilarities.

Identification of articles reporting on interdisciplinary research may be important to WUR policy for strategic purposes or for the evaluation of researchers or groups. Also, this analysis enables to identify journals with high mean dissimilarities (due to WUR articles citing more various research fields). Identification of these journals with a more interdisciplinary scope can be important for collection management by the library.