Search results

This paper aims to study microwave pad dyeing process for wool fabric. Influences of various dyeing process conditions including galactomannan dosage, urea dosage, sodium bisulphite dosage, pH value, microwave irradiation power, treating time and cold batching time before microwave fixation on K/S values were analysed. The colour yield, fixation and levelness were compared between microwave fixation and cold batching fixation.

Colour yield (K/S values) was calculated using a Datacolor SF650 colour measuring and matching instrument (10° standard observer, CIE D65 light source Measuring; Datacolor, USA) and was used to determine the depth of the shade of dyed wool fabrics. Levelness of dyeing was evaluated also using the Datacolor SF650 colour measuring and matching instrument by measuring average deviation (S), range (P) of the maximum and the minimum for lightness (L), chroma (C) and hue (h), and balanced colour difference (ΔE) at 20 specified uniform locations on the wool fabrics. The colour difference was calculated as per the equation ΔE=(ΔL2+Δa2+Δb2)1/2 as appearing in the Experimental section. Fixation was determined using a Datacolor SF650 colour measuring and matching instrument by measuring ratio the of K/S for wool fabrics that were rinsed, washed, neutralised and then dried, and wool fabrics that were dried after fixation without washing. The pH of the padding solution was evaluated using a PHSJ-4A PH meter (Datacolor, USA). SEM analysis was done on JEOL JSM-5600LV machine (JEOL Ltd, Japan).

This study is based on application of microwave technology in the processing of silk.

It was found in laboratory experiments that uniform dyeing and deeper colour can be achieved throughout the microwave pad dyeing process for wool by using galactomannan. The novel process could reduce the dyeing time and the energy consumption of the traditional cold pad-batch dyeing process for wool fabric.

Describes a study to measure the quality of service provided by food‐poisoning surveillance agencies in England and Wales in terms of the requirements of a representative consumer ‐ the egg producing industry ‐ adopting “egg associated” outbreak investigation reports as the reference output. Defines and makes use of four primary performance indicators: accessibility of information; completeness of evidence supplied in food‐poisoning outbreak investigation reports as to the sources of infection in “egg‐associated” outbreaks; timeliness of information published; and utility of information and advice aimed at preventing or controlling food poisoning. Finds that quality expectations in each parameter measured are not met. Examines reasons why surveillance agencies have not delivered the quality demanded. Makes use of detailed case studies to illustrate inadequacies of current practice. Attributes failure to deliver “accessibility” to a lack of recognition on the status or nature of “consumers”, combined with a self‐maintenance motivation of the part of the surveillance agencies. Finds that failures to deliver “completeness” and “utility” may result from the same defects which give rise to the lack of “accessibility” in that, failing to recognize the consumers of a public service for what they are, the agencies feel no need to provide them with the data they require. The research indicates that self‐maintenance by scientific epidemiologists may introduce biases which when combined with a politically inspired need to transfer responsibility for food‐poisoning outbreaks, skew the conduct of investigations and their conclusions. Contends that this is compounded by serious and multiple inadequacies in the conduct of investigations, arising at least in part from the lack of training and relative inexperience of investigators, the whole conditioned by interdisciplinary rivalry between the professional groups staffing the different agencies. Finds that in addition failures to exploit or develop epidemiological technologies has affected the ability of investigators to resolve the uncertainties identified. Makes recommendations directed at improving the performance of the surveillance agencies which, if adopted will substantially enhance food poisoning control efforts.

THE uses of high‐tensile aluminium alloy compression members in aircraft construction may be divided into two main classes: (1) That in which the members are employed as stiffeners in stresscd‐skin construction; (2) That in which they are employed as struts in trussed structures.

Looks at the eighth published year of the ITCRR and the research, from far and near, involved in this. Muses on the fact that, though all the usual processes are to the fore, the downside part of the industry is garment making which is the least developed side. Posits that the manufacture of clothing needs to become more technologically advanced as does retailing. Closes by emphasising support for the community in all its efforts.

Industrial manufacture is the principal source of our national wealth, and it supports all our other activities; consequently its wellbeing is of crucial importance to us all. It has been developing in three main streams — process manufacture, flowline or mass production, and batch manufacture — and of these only the first has kept in step with the parallel development of society. In the others, the trends of management organization and the work patterns which this has created have been steadily veering into conflict with the values, aspirations and expectations of the people who have to make the industrial system work. The effects are visible now, and unless the patterns are changed, large sectors of industry could eventually become unworkable, because the qualities and skills needed in an individual are unlikely to be combined with a willingness to do the type of job offered. An account of the present position and possible directions of change in flowline and batch production is given, which satisfy the dual criteria of providing improved efficiency and a better match with society.

The current industry standard rigid spinal implants suffer fatigue failures due to bending and torsion loads. The purpose of this program was to design novel prototype flexible titanium alloy spinal implant rod with machined features, and then apply the laser shock peening (LSP) process to restore the fatigue strength debit due to these features.

A flexible prototype rod was designed with flat section at the center of the rod. The flat section was laser shock peened. Static compression tests were conducted as per American Society of Testing Materials standards for three‐ and four‐point bending tests and “vertebrectomy” constructs. Finite element models were developed to aid in the design of LSP and also to guide the experiments.

The test results indicated a ∼3X improvement in flexibility and a reduction in fatigue load ratio, defined as applied load divided by the yield load; from 72 to 68 percent. This rod was LSP's on the flat sections, and tested again. The results indicated an increase in the fatigue load ratio from 68 to 75 percent without any further change in flexibility.

It has been demonstrated successfully that the current industry rigid spinal implant rod can be modified for flexibility and laser shock peened to increase fatigue strength. This enhancement will enable the use of the implant for longer periods and higher loads; and for surgical processes with and without fusion. This technology can be readily applied to all metals that are certified for human implant applications; thus can be implemented with minimal clinical trials.

When sales vary significantly according to season, the manufacturer makes special provisions to integrate the acquisition of raw materials and labour with an effective production schedule which satisfies customers′ requirements. The recommended procedure is called aggregate planning, and many algorithms produce a good definitive solution. However, they have been ignored by industry. The empirical research presented here looks at such planning in a sample of 20 Australian factories. It sheds some light on the acknowledged gap between theory and practice, and suggests that business strategy, the extent of the seasonal distortion, and the tactical remedies available, are all linked. Strategic and tactical considerations tend to bypass the aggregate planning step, and the problem is ultimately resolved at the master production schedule level.

In years past, when life seemed simpler and the Law much less complicated, jurists were fond of quoting the age‐old saying: “All men are equal before the Law.” It was never completely true; there were important exemptions when strict legal enforcement would have been against the public interests. A classic example was Crown immunity, evolved from the historical principle that “The King can do no wrong”. With the growth of government, the multiplicity of government agencies and the enormous amount of secondary legislation, the statutes being merely enabling Acts, this immunity revealed itself as being used largely against public interests. Statutory instruments were being drafted within Ministerial departments largely by as many as 300 officers of those departments authorized to sign such measures, affecting the rights of the people without any real Parliamentary control. Those who suffered and lost in their enforcement had no remedy; Crown immunity protected all those acting as servants of the Crown and the principle came to be an officials' charter with no connection whatever with the Crown. Parliament, custodian of the national conscience, removed much of this socially unacceptable privilege in the Crown Proceedings Act, 1947, which enabled injured parties within limit to sue central departments and their officers. The more recent system of Commissioners—Parliamentary, Local Authority, Health Service—with power to enquire into allegations of injustice, maladministration, malpractice to individuals extra‐legally, has extended the rights of the suffering citizen.