Search results

To develop electrode materials for supercapacitor with superior electrochemical performance and simple preparation process, the purpose of this study is to prepare flexible CC/NiS/a-NiS electrodes with self-supporting structure by loading hydrothermally synthesized a-NiS particles along with nano-NiS on carbon cloth by electroplating method.

The effects of current densities, temperatures and pH values on the loading amount and uniformity of the active substances during the plating process were investigated on the basis of optimization of surface morphology, crystalline structure and electrochemical evaluation as the cyclic voltammetry curves, constant current charge–discharge curves and AC impedance.

The a-NiS particles on CC/NiS/a-NiS were mostly covered by the plated nano-NiS, which behaved as a bulge and provided a larger specific surface area. The CC/NiS/a-NiS electrode prepared with the optimized parameter exhibited a specific capacitance of 115.13 F/g at a current density of 1 A/g and a Coulomb efficiency of 84% at 5 A/g, which is superior to that of CC/NiS electrode prepared by electroplating at a current density of 10 mA/cm², a temperature of 55°C and a pH of 4, demonstrating its fast charge response of the electrode and potential application in wearable electronics.

This study provides an integrated solution for the development of specifically structured NiS-based electrode for supercapacitor with simple process, low cost and high electrochemical charge/discharge performance, and the simple and easy-to-use method is also applicable to other electrochemically active composites.

Polyethylene terephthalate (PET) as a fiber molding polymer is widely used in aerospace, electrical and electronic, clothing and other fields. The purpose of this study is to improve the thermal insulation performance of polyethylene terephthalate (PET), the SiO₂ aerogel/PET composites slices and fibers were prepared, and the effects of the SiO₂ aerogel on the morphology, structure, crystallization property and thermal conductivity of the SiO₂ aerogel/PET composites slices and their fibers were systematically investigated.

The mass ratio of purified terephthalic acid and ethylene glycol was selected as 1:1.5, which was premixed with Sb₂O₃ and the corresponding mass of SiO₂ aerogel, and SiO₂ aerogel/PET composites were prepared by direct esterification and in-situ polymerization. The SiO₂ aerogel/PET composite fibers were prepared by melt-spinning method.

The results showed that the SiO₂ aerogel was uniformly dispersed in the PET matrix. The thermal insulation coefficient of PET was significantly reduced by the addition of SiO₂ aerogel, and the thermal conductivity of the 1.0 Wt.% SiO₂ aerogel/PET composites was reduced by 75.74 mW/(m · K) compared to the pure PET. The thermal conductivity of the 0.8 Wt.% SiO₂ aerogel/PET composite fiber was reduced by 46.06% compared to the pure PET fiber. The crystallinity and flame-retardant coefficient of the SiO₂ aerogel/PET composite fibers showed an increasing trend with the addition of SiO₂ aerogel.

The SiO₂ aerogel/PET composite slices and their fibers have good thermal insulation properties and exhibit good potential for application in the field of thermal insulation, such as warm clothes. In today’s society where the energy crisis is becoming increasingly serious, improving the thermal insulation performance of PET to reduce energy loss will be of great significance to alleviate the energy crisis.

In this study, SiO₂ aerogel/PET composite slices and their fibers were prepared by an in situ polymerization process, which solved the problem of difficult dispersion of nanoparticles in the matrix and the thermal conductivity of PET significantly reduced.

This paper aims to concentrate on recent innovations in flexible wearable sensor technology tailored for monitoring vital signals within the contexts of wearable sensors and systems developed specifically for monitoring health and fitness metrics.

In recent decades, wearable sensors for monitoring vital signals in sports and health have advanced greatly. Vital signals include electrocardiogram, electroencephalogram, electromyography, inertial data, body motions, cardiac rate and bodily fluids like blood and sweating, making them a good choice for sensing devices.

This report reviewed reputable journal articles on wearable sensors for vital signal monitoring, focusing on multimode and integrated multi-dimensional capabilities like structure, accuracy and nature of the devices, which may offer a more versatile and comprehensive solution.

The paper provides essential information on the present obstacles and challenges in this domain and provide a glimpse into the future directions of wearable sensors for the detection of these crucial signals. Importantly, it is evident that the integration of modern fabricating techniques, stretchable electronic devices, the Internet of Things and the application of artificial intelligence algorithms has significantly improved the capacity to efficiently monitor and leverage these signals for human health monitoring, including disease prediction.

In this paper, the authors aim to study the effect of hydrogen on the pitting corrosion behavior of Incoloy 825, a commonly used material for heat exchanger tubes in hydrogenated heat exchangers.

The pitting initiation and propagation behaviors were investigated by electrochemical and chemical immersion experiments and observed and analyzed by scanning electron microscope and energy dispersive spectrometer methods.

The results show that hydrogen significantly affects the electrochemical behavior of Incoloy 825; the self-corrosion potential decreased from −197 mV before hydrogen charging to −263 mV, −270 mV and −657 mV after hydrogen charging, and the corrosion current density increased from 0.049 µA/cm² before hydrogen charging to 2.490 µA/cm², 2.560 µA/cm² and 2.780 µA/cm² after hydrogen charging. The pitting susceptibility of the material increases.

Hydrogen is enriched on the precipitate, and the pitting corrosion also initiates at that location. The synergistic effect of hydrogen and precipitate destroys the passive film on the metal surface and promotes pitting initiation.

Everyone is extremely concerned about environmental protection and health safety due to the rise in living standards. Plant-derived natural dyes have garnered much industrial attention in food, pharmaceutical, textile, cosmetics, etc. owing to their health and environmental benefits. The present study aims to focus on the elimination of the use of synthetic dyes and provides brief information about natural dyes, their sources, extraction procedures with characterization and various advantages and disadvantages.

In producing natural colors, extraction and purification are essential steps. Various conventional methods used till date have a low yield, as these consume a lot of solvent volume, time, labor and energy or may destroy the coloring behavior of the actual molecules. The establishment of proper characterization and certification protocols for natural dyes would improve the yielding of natural dyes and benefit both producers and users.

However, scientists have found modern extraction methods to obtain maximum color yield. They are also modifying the fabric surface to appraise its uptake behavior of color. Various extraction techniques such as solvent, aqueous, enzymatic and fermentation and extraction with microwave or ultrasonic energy, supercritical fluid extraction and alkaline or acid extraction are currently available for these natural dyes and are summarized in the present review article.

If natural dye availability can be increased by the different extraction measures and the cost of purified dyes can be brought down with a proper certification mechanism, there is a wide scope for the adoption of these dyes by small-scale dyeing units.

The utilisation of renewable energy sources for generating electricity and potable water is one of the most sustainable approaches in the current scenario. Therefore, the current research aims to design and develop a novel co-generation system to address the electricity and potable water needs of rural areas.

The cogeneration system mainly consists of a solar parabolic dish concentrator (SPDC) system with a concentrated photo-voltaic module at the receiver for electricity generation. It is further integrated with a low-temperature thermal desalination (LTTD) system for generating potable water. Also, a novel corn cob filtration system is introduced for the pre-treatment to reduce the salt content in seawater before circulating it into the receiver of the SPDC system. The designed novel co-generation system has been numerically and experimentally tested to analyse the performance at Karaikal, U.T. of Puducherry, India.

Because of the pre-treatment with a corn cob, the scale formation in the pipes of the SPDC system is significantly reduced, which enhances the efficiency of the system. It is observed that the conductivity, pH and TDS of seawater are reduced significantly after the pre-treatment by the corncob filtration system. Also, the integrated system is capable of generating 6–8 litres of potable water per day.

The integration of the corncob filtration system reduced the scaling formation compared to the general circulation of water in the hoses. Also, the integrated SPDC and LTTD systems are comparatively economical to generate higher yields of clean water than solar stills.

The apparel and textile sector poses a significant environmental challenge due to its substantial contribution to pollution in the form of air, water and soil pollution. To combat these issues, the adoption of sustainable practices is essential. This study aims to identify and analyse the barriers that hinder the progress of sustainability in the apparel and textile industry. By consulting experts in the field, critical barriers were identified and given special attention.

To achieve the research objective, an integrated approach involving Interpretive Structural Modelling (ISM) and fuzzy MICMAC decision-making techniques was employed. The results were further validated through the Decision-Making Trial and Evaluation Laboratory (DEMATEL) method.

The findings highlight that barrier related to clothing disposal, inadequate adaptation to modern technology, challenges affecting sector efficiency and issues related to fashion design are crucial in influencing the remaining six barriers. Based on the outcomes of the DEMATEL method, a comprehensive cause-and-effect diagram was constructed to gain a deeper understanding of these challenges.

This research provides valuable insights for policymakers and stakeholders in the apparel and textile industry. It offers a strategic framework to address and overcome sustainability barriers, promoting the development of a more environmentally responsible and resilient sector.

The purpose of this research is to conduct an in-depth investigation of the barriers apparel and textile sectors. It is feasible that both the management team and the medical experts who provide direct patient care could benefit from this research.

This paper reports the results of research that examines the interrelationships between efficacy of sustainability values (SV) and pro-sustainable behaviors of potential tourists. A partially mediated model is postulated and tested to help explain additional error variance in predicting consumers’ destination choice decisions in tourism, hence voiding a critical research gap. Coined as the “environmentally intellectualist behavior,” a new mediator variable is tested to explain additional error variance in human-value models.

The study is based on data collected from two representative samples of potential tourists from the USA and Canada. Data analyses include exploratory and confirmatory factor analyses that were used to examine the underlying domain structures of SV, followed by a predictive model using structural equation modeling.

The study findings suggest that values are salient factors that underlie pro-sustainable tourism and travel behavior. Moreover, the results confirm the existence of a higher-order sustainability construct. The study contributes original insights to the field by demonstrating that there are direct and indirect positive relationships between SV, environmental behaviors and decisions of consumers who take a pro-sustainable stance when traveling.

By modeling values as antecedents to attitudes and testing interrelationships between SV and the mediator variables coined as the environmentally intellectual behavior, the authors developed and tested a predictive model to explain destination- and product choice decisions. The model tested herein advances the value theory in two fundamental ways: first, this study demonstrates that SV can be modeled as higher-order factors. Second, values are antecedents to attitude and other variables, therefore must be included in consumer behavior models. Finally, the culture or origin of tourists matters when examining the impact of values on tourists’ choice decisions. Political actions and environmental attitudes can be modeled as mediators to explain additional error variance.

Over the years, the significance of retrofitting has gained much attention with the unveiling of its different applications, such as energy retrofit and deep retrofit, to enhance the climate-resilience of buildings. However, no single study comprehensively assesses the climate-resilience of retrofitting. The purpose of this study is to address this gap via a systematic literature review.

Quality journal studies were selected using the PRISMA method and analysed manually and using scientometrics. Three dimensions of climate-resilience, such as robustness, withstanding and recovery, were used to evaluate the contribution of retrofit measures for achieving climate-resilient houses across four climate zones: tropical, arid, temperate and cold.

Most passive measures can enhance the robustness of residential buildings but cannot verify for withstanding against immediate shocks and timely recovery. However, some passive measures, such as night-time ventilation, show excellent performance over all four climate zones. Active measures such as heating, ventilation and air conditioning and mechanical ventilation with heat recovery, can ensure climate-resilience in all three dimensions in the short-term but contribute to greenhouse gas emissions, further exacerbating the long-term climate. Integrating renewable energy sources can defeat this issue. Thus, all three retrofit strategies should appropriately be adopted together to achieve climate-resilient houses.

Since the research is limited to secondary data, retrofit measures recommended in this research should be further investigated before application.

This review contributes to the knowledge domain of retrofitting by assessing the contribution of different retrofit measures to climate-resilience.

The purpose of this paper is to present a framework of ideation pathways that organically extend the current stock of knowledge to generate new and useful knowledge. Although detailed, granular guidance is available in the strategy literature on all aspects of empirically testing theory, the other key aspect of theory development – theory generation – remains relatively neglected. The framework developed in this paper addresses this gap by proposing pathways for how new theory can be generated.

Grounded in two foundational principles in epistemology, the Genetic Argument and the open-endedness of knowledge, I offer a framework of distinct pathways that systematically lead to the creation of new knowledge.

Existing knowledge can be deepened (through introspection), broadened (through leverage) and rejuvenated (through innovation). These ideation pathways can unlock the vast, hidden potential of current knowledge in strategy.

The novelty and doability of the framework can potentially inspire research on a broad, community-wide basis, engaging PhD students and management faculty, improving knowledge, democratizing scholarship and deepening the societal footprint of strategy research.

Knowledge is open-ended. The more we know, the more we appreciate how much we don’t know. But the lack of clear guidance on rigorous pathways along which new knowledge that advances both theory and practice can be created from prior knowledge has stymied strategy research. The paper’s framework systematically pulls together for the first time the disparate elements of transforming past learning into new knowledge in a coherent epistemological whole.