Search results

In order to solve the problem of inaccurate calculation of index weights, subjectivity and uncertainty of index assessment in the risk assessment process, this study aims to propose a scientific and reasonable centralized traffic control (CTC) system risk assessment method.

First, system-theoretic process analysis (STPA) is used to conduct risk analysis on the CTC system and constructs risk assessment indexes based on this analysis. Then, to enhance the accuracy of weight calculation, the fuzzy analytical hierarchy process (FAHP), fuzzy decision-making trial and evaluation laboratory (FDEMATEL) and entropy weight method are employed to calculate the subjective weight, relative weight and objective weight of each index. These three types of weights are combined using game theory to obtain the combined weight for each index. To reduce subjectivity and uncertainty in the assessment process, the backward cloud generator method is utilized to obtain the numerical character (NC) of the cloud model for each index. The NCs of the indexes are then weighted to derive the comprehensive cloud for risk assessment of the CTC system. This cloud model is used to obtain the CTC system's comprehensive risk assessment. The model's similarity measurement method gauges the likeness between the comprehensive risk assessment cloud and the risk standard cloud. Finally, this process yields the risk assessment results for the CTC system.

The cloud model can handle the subjectivity and fuzziness in the risk assessment process well. The cloud model-based risk assessment method was applied to the CTC system risk assessment of a railway group and achieved good results.

This study provides a cloud model-based method for risk assessment of CTC systems, which accurately calculates the weight of risk indexes and uses cloud models to reduce uncertainty and subjectivity in the assessment, achieving effective risk assessment of CTC systems. It can provide a reference and theoretical basis for risk management of the CTC system.

This paper comprehensively addresses the influence of chopped strand mat glass fiber-reinforced polymer (GFRP) patch configurations such as geometry, dimensions, position and the number of layers of patches, whether a single or double patch is used and how well debonding the area under the patch improves the strength of the cracked aluminum plates with different crack lengths.

Single-edge cracked aluminum specimens of 150 mm in length and 50 mm in width were tested using the tensile test. The cracked aluminum specimens were then repaired using GFRP patches with various configurations. A three-dimensional (3D) finite element method (FEM) was adopted to simulate the repaired cracked aluminum plates using composite patches to obtain the stress intensity factor (SIF). The numerical modeling and validation of ABAQUS software and the contour integral method for SIF calculations provide a valuable tool for further investigation and design optimization.

The width of the GFRP patches affected the efficiency of the rehabilitated cracked aluminum plate. Increasing patch width WP from 5 mm to 15 mm increases the peak load by 9.7 and 17.5%, respectively, if compared with the specimen without the patch. The efficiency of the GFRP patch in reducing the SIF increased as the number of layers increased, i.e. the maximum load was enhanced by 5%.

This study assessed repairing metallic structures using the chopped strand mat GFRP. Furthermore, it demonstrated the superiority of rectangular patches over semicircular ones, along with the benefit of using double patches for out-of-plane bending prevention and it emphasizes the detrimental effect of defects in the bonding area between the patch and the cracked component. This underlines the importance of proper surface preparation and bonding techniques for successful repair.

The main objective of the present research is to investigate the benefits of using geogrid reinforcement in minimizing the rate of deterioration of ballasted rail track geometry resting on soft clay and to explore the effect of load amplitude, load frequency, presence of geogrid layer in ballast layer and ballast layer thickness on the behavior of track system. These variables are studied both experimentally and numerically. This paper examines the effect of geogrid reinforced ballast laying on a layer of clayey soil as a subgrade layer, where a half full scale railway tests are conducted as well as a theoretical analysis is performed.

The experimental tests work consists of laboratory model tests to investigate the reduction in the compressibility and stress distribution induced in soft clay under a ballast railway reinforced by geogrid reinforcement subjected to dynamic load. Experimental model based on an approximate half scale for general rail track engineering practice is adopted in this study which is used in Iraqi railways. The investigated parameters are load amplitude, load frequency and presence of geogrid reinforcement layer. A half full-scale railway was constructed for carrying out the tests, which consists of two rails 800 mm in length with three wooden sleepers (900 mm × 90 mm × 90 mm). The ballast was overlying 500 mm thick clay layer. The tests were carried out with and without geogrid reinforcement, the tests were carried out in a well tied steel box of 1.5 m length × 1 m width × 1 m height. A series of laboratory tests were conducted to investigate the response of the ballast and the clay layers where the ballast was reinforced by a geogrid. Settlement in ballast and clay, was measured in reinforced and unreinforced ballast cases. In addition to the laboratory tests, the application of numerical analysis was made by using the finite element program PLAXIS 3D 2013.

It was concluded that the settlement increased with increasing the simulated train load amplitude, there is a sharp increase in settlement up to the cycle 500 and after that, there is a gradual increase to level out between, 2,500 and 4,500 cycles depending on the load frequency. There is a little increase in the induced settlement when the load amplitude increased from 0.5 to 1 ton, but it is higher when the load amplitude increased to 2 ton, the increase in settlement depends on the geogrid existence and the other studied parameters. Both experimental and numerical results showed the same behavior. The effect of load frequency on the settlement ratio is almost constant after 500 cycles. In general, for reinforced cases, the effect of load frequency on the settlement ratio is very small ranging between 0.5 and 2% compared with the unreinforced case.

Increasing the ballast layer thickness from 20 cm to 30 cm leads to decrease the settlement by about 50%. This ascertains the efficiency of ballast in spreading the waves induced by the track.

Interior workspace environments use exclusively artificial light, resulting in a loss of biological connection and natural light quality, as well as greater energy consumption. The purpose of the study is to identify a suitable system that can provide natural light to such interior spaces throughout the day while supplementing it with artificial light when necessary. The fundamental aim is to provide insights into the most effective solutions for energy-efficient lighting design in the UAE's environment, with the potential to lower energy consumption related to interior lighting.

The study adopted an empirical approach to gather and analyze primary data based on field measurements to understand and assess existing lighting conditions, as well as DIALux lighting simulation software to test the efficacy of the proposed HLS in terms of natural light delivery, illumination quality and energy consumption. A branch of a local bank in the United Arab Emirates, situated inside one of the shopping malls where there is no natural light penetration, has been chosen as a case study.

The findings of comparing the base case to four probable scenarios that used HLS revealed that the third scenario, which uses 100% pure sunshine and 35% artificial LED light during daylight operations and 100% LED light during night duty, is considered to be optimal in terms of illumination quality and energy efficiency.

The study demonstrated the potential of innovative lighting to improve the visual working environment in interior spaces with limited access to direct natural lighting, especially in arid regions, where sunlight is plentiful throughout the year. The study contributes new insights into the establishment of lighting-related recommendations and standards for the UAE context. This may include advice for sustainable construction practices, lighting guidelines or incentives to encourage the use of hybrid lighting technology in commercial and institutional buildings.

This work analyzes, through social-environmental reports, whether banks with higher transparency in social-environmental policies better safeguard financial stability in Brazil.

The analysis is carried out through a panel database analysis of the 42 largest Brazilian banks, representing 98% of the Brazilian financial system. Seeking to avoid spurious results, we followed rigorous methodological standards. Hence, we conducted an empirical analysis using a dynamic panel data model, we used the difference generalized method of moments (D-GMM) and the system generalized method of moments (S-GMM).

The results show that the higher the transparency of social-environmental policies, the lower the chance of possible stress on the financial stability of Brazilian banks. In sum, this study builds evidence that disclosing risks related to policies about sustainability can enhance financial stability. It is essential to highlight that social-environmental transparency does not have as direct objective financial stability.

The manuscript submitted represents an original work that analyzes whether banks with higher transparency in social-environmental policies better safeguard financial stability. Some countries, such as Brazil, have their potential for sustainable policies spotlighted due to their green territory and diverse natural ecosystems. Besides having green potential, Brazil is a developing country with a well-developed financial system. These characteristics make Brazil one of the best laboratories for studying the relationship between transparency in social-environmental policies and financial stability.

This study aims to investigate the effect of speckle pattern on displacement measurements using different speckle diameters and coverage ratios.

In order to compare the coverage ratio and speckle diameter during the evaluation of the correlation of digital images (DIC) study, template speckle plates were produced on a computer numerical control (CNC) punch press with 600 punches per minute. After the speckle plates were manufactured, the speckled pattern was randomly painted on a plain white side through the manufactured template plates, and then tensile tests were performed under the same loading conditions for each sample to observe displacement variation via correlation parameters.

During the manufacturing of templates with thin plates, a punch diameter of less than 1.7 mm will cause tool failure; therefore, uniform speckle size can be assessed before operation. A higher coverage ratio resulted in more accurate and reliable results in displacement data. With smaller coverage, the facet size should be increased to achieve favorable results.

If thick template plates are selected, speckle painting cannot be done properly; therefore, template thickness shall also be assessed before operation.

For randomly distributed DIC templates, increasing coverage beyond 50% does not make sense due to difficulties in the production process in the punch press.

Evaluating DIC results via templates manufactured in a punch press with different speckle diameters and coverage ratios is a new topic in literature.

The purpose of this paper is to gain a better understanding on how metasurfaces behave, in terms of currents in each unit cell. A better knowledge of their behavior could lead to an ad-hoc design for specific applications.

The methodology used is both theoretical and numerical; it is based on circuit theory and on an optimization procedure.

The results show that when the knowledge of the current in each unit cell of a metasurface is needed, the most common approximations currently used are often not accurate. Furthermore, a procedure for the termination of a metasurface, with application-driven goals, is given.

This paper investigates the distribution of the currents in a 2D metamaterial realized with magnetically coupled resonant coils. Different models for the analysis of these structures are illustrated, and the effects of the approximations they introduce on the current values are shown and discussed. Furthermore, proper terminations of the resonators on the boundaries have been investigated by implementing a numerical optimization procedure with the purpose of achieving a uniform distribution of the resonator currents. The results show that the behavior of a metasurface (in terms of currents in each single resonator) depends on different properties; as a consequence, their design is not a trivial task and is dependent on the specific applications they are designed for. A design strategy, with lumped impedance termination, is here proposed.

This study aims to investigate the combined use of System Dynamics (SD) applications in Enterprise Engineering (EE) research and practice. SD application in EE is becoming widely accepted as a tool to support decision-making processes and for capturing relationships within enterprises.

A systematic literature review (SLR) is conducted using a standard SLR method to provide a comprehensive review of existing literature. The search was conducted on ten platforms identifying 30 publications which were analysed through the use and development of a codebook.

The SLR showed that 90% of the result set consisted of peer-reviewed academic conferences and journal papers. The SLR identified a highly dispersed author set of 83 authors. Amongst these authors, Vinay Kulkarni was an active author who has co-authored up to four publications in this research area. The analysis further revealed that the combined use of SD applications and EE is an emerging research area that still needs to develop in maturity. While all phases of EE have received attention, the current research work is more focused on the design phase. The important gap between model development and implementation is identified.

The study elucidates the existing status of interdisciplinary research combining techniques from the SD and EE disciplines, suggesting future research topics that combine the strengths of these existing disciplines.

Surprisingly little is known of the various methods of security analysis used by financial analysts with industry-specific knowledge. Financial analysts’ industry knowledge is a favored and appreciated attribute by fund managers and institutional investors. Understanding analysts’ use of industry-specific valuation models, which are the main value drivers within different industries, will enhance our understanding of important aspects of value creation in these industries. This paper contributes to the broader understanding of how financial analysts in various industries approach valuation, offering insights that can be beneficial to a wide range of stakeholders in the financial market.

This paper systematically reviews existing research to consolidate the current understanding of analysts’ use of valuation models and factors. It aims to demystify what can often be seen as a “black box”, shedding light on the valuation tools employed by financial analysts across diverse industries.

The use of industry-specific valuation models and factors by analysts is a subject of considerable interest to both academics and investors. The predominant model in several industries is P/E, with some exceptions. Notably, EV/EBITDA is favored in the telecom, energy and materials sectors, while the capital goods industry primarily relies on P/CF. In the REITs sector, P/AFFO is the most commonly employed model. In specific sectors like pharmaceuticals, energy and telecom, DCF is utilized. However, theoretical models like RIM and AEG find limited use among analysts.

This is the first paper systematically reviewing the research on analyst’s use of industry-specific stock valuation methods. It serves as a foundation for future research in this field and is likely to be of interest to academics, analysts, fund managers and investors.

Considering the impact of the Free Trade Zone (FTZ) policy on forecasting the port cargo throughput, this paper constructs a fractional grey multivariate forecasting model to improve the prediction accuracy of port cargo throughput and realize the coordinated development of FTZ policymaking and port construction.

Considering the effects of data randomization, this paper proposes a novel self-adaptive grey multivariate prediction model, namely FDCGM(1,N). First, fractional-order accumulative generation operation (AGO) is introduced, which integrates the policy impact effect. Second, the heuristic grey wolf optimization (GWO) algorithm is used to determine the optimal nonlinear parameters. Finally, the novel model is then applied to port scale simulation and forecasting in Tianjin and Fujian where FTZs are situated and compared with three other grey models and two machine learning models.

In the Tianjin and Fujian cases, the new model outperforms the other comparison models, with the least mean absolute percentage error (MAPE) values of 6.07% and 4.16% in the simulation phase, and 6.70% and 1.63% in the forecasting phase, respectively. The results of the comparative analysis find that after the constitution of the FTZs, Tianjin’s port cargo throughput has shown a slow growth trend, and Fujian’s port cargo throughput has exhibited rapid growth. Further, the port cargo throughput of Tianjin and Fujian will maintain a growing trend in the next four years.

The new multivariable grey model can effectively reduce the impact of data randomness on forecasting. Meanwhile, FTZ policy has regional heterogeneity in port development, and the government can take different measures to improve the development of ports.

Under the background of FTZ policy, the new multivariable model can be used to achieve accurate prediction, which is conducive to determining the direction of port development and planning the port layout.