Search results

The purpose of this paper is to develop a concurrent multiscale computational method for granular materials in the quasi-static loading regime.

Overlapped-coupling between a micropolar linear elastic one-dimensional (1D) mixed finite element (FE) model and a 1D chain of Hertzian nonlinear elastic, glued, discrete element (DE) spheres is presented. The 1D micropolar FEs and 1D chain of DEs are coupled using a bridging-scale decomposition for static analysis.

It was found that an open-window DE domain may be coupled to a micropolar continuum FE domain via an overlapping region within the bridging-scale decomposition formulation for statics. Allowing the micropolar continuum FE energy in the overlapping region to contribute to the DE energy has a smoothing effect on the DE response, especially for the rotational degrees of freedom (dofs).

The paper focusses on 1D examples, with elastic, glued, DE spheres, and a linear elastic micropolar continuum implemented in 1D.

A concurrent computational multiscale method for granular materials with open-window DE resolution of the large shearing region such as at the interface with a penetrometer skin, will allow more efficient computations by reducing the more costly DE domain calculations, but not at the expense of generating artificial boundary effects between the DE and FE domains.

Open-window DE overlapped-coupling to FE continuum domain, accounting for rotational dofs in both DE and FE methods. Contribution of energy from micropolar FE in overlap region to underlying DE particle energy.

The purpose of this paper is to extend the bridge scale method (BSM) developed for granular materials with only the solid phase to that taking into account the effects of wetting process in porous continuum. The granular material is modeled as partially saturated porous Cosserat continuum and discrete particle assembly in the coarse and fine scales, respectively.

Based on the mass and momentum conservation laws for the three phases, i.e. the solid skeleton, the pore water and the pore air, the governing equations for the unsaturated porous Biot-Cosserat continuum model in the coarse scale are derived. In light of the passive air pressure assumption, a reduced finite element model for the model is proposed. According to the decoupling of the fine and coarse scale calculations in the BSM, the unsaturated porous Cosserat continuum model using the finite element method and the discrete element model using the discrete element method for granular media are combined.

The numerical results for a 2D example problem of slope stability subjected to increasing rainfall along with mechanical loading demonstrate the applicability and performance of the present BSM. The microscopic mechanisms of macroscopic shear band developed in the slope are demonstrated.

Do not account for yet the effects of unsaturated pore water in the fine scale.

The novel BSM that couples the Biot-Cosserat porous continuum modeling and the discrete particle assembly modeling in both coarse and fine scales, respectively, is proposed to provide a micro-macro discrete-continuum two-scale modeling approach for numerical simulations of the hydro-mechanical coupling problems in unsaturated granular materials.

The purpose of this paper is to develop a discrete element (DE) and multiscale modeling methodology to represent granular media at their particle scale as they interface solid deformable bodies, such as soil‐tool, tire, penetrometer, pile, etc., interfaces.

A three‐dimensional ellipsoidal discrete element method (DEM) is developed to more physically represent particle shape in granular media while retaining the efficiency of smooth contact interface conditions for computation. DE coupling to finite element (FE) facets is presented to demonstrate initially the development of overlapping bridging scale methods for concurrent multiscale modeling of granular media.

A closed‐form solution of ellipsoidal particle contact resolution and stiffness is presented and demonstrated for two particle, and many particle contact simulations, during gravity deposition, and quasi‐static oedometer, triaxial compression, and pile penetration. The DE‐FE facet coupling demonstrates the potential to alleviate artificial boundary effects in the shear deformation region between DEM granular media and deformable solid bodies.

The research is being extended to couple more robustly the ellipsoidal DEM code and a higher order continuum FE code via overlapping bridging scale methods, in order to remove dependence of penetration/shear resistance on the boundary placement for DE simulation.

When concurrent multiscale computational modeling of interface conditions between deformable solid bodies and granular materials reaches maturity, modelers will be able to simulate the mechanical behavior accounting for physical particle sizes and flow in the interface region, and thus design their tool, tire, penetrometer, or pile accordingly.

A closed‐form solution for ellipsoidal particle contact is demonstrated in this paper, and the ability to couple DE to FE facets.

The purpose of this paper is to develop a method to model entire structures on a large scale, at the same time taking into account localized non-linear phenomena of the discrete microstructure of cohesive-frictional materials.

Finite element (FEM) based continuum methods are generally considered appropriate as long as solutions are smooth. However, when discontinuities like cracks and fragmentation appear and evolve, application of models that take into account (evolving) microstructures may be advantageous. One popular model to simulate behavior of cohesive-frictional materials is the discrete element method (DEM). However, even if the microscale is close to the macroscale, DEMs are computationally expensive and can only be applied to relatively small specimen sizes and time intervals. Hence, a method is desirable that combines efficiency of FEM with accuracy of DEM by adaptively switching from the continuous to the discrete model where necessary.

An existing method which allows smooth transition between discrete and continuous models is the quasicontinuum method, developed in the field of atomistic simulations. It is taken as a starting point and its concepts are extended to applications in structural mechanics in this paper. The kinematics in the method presented herein is obtained from FEM whereas DEM yields the constitutive behavior. With respect to the constitutive law, three levels of resolution – continuous, intermediate and discrete – are introduced.

The overall concept combines model adaptation with adaptive mesh refinement with the aim to obtain a most efficient and accurate solution.

This paper aims to construct smooth poly-ellipsoid shapes from synchrotron microcomputed tomography (SMT) images on sand and to develop a new discrete element method (DEM) contact detection algorithm.

Voxelated images generated by SMT on Colorado Mason sand are processed to construct smooth poly-ellipsoidal particle approximations. For DEM contact detection, cuboidal shape approximations to the poly-ellipsoids are used to speed up contact detection.

The poly-ellipsoid particle shape approximation to Colorado Mason sand grains is better than a simpler ellipsoidal approximation. The new DEM contact algorithm leads to significant speedup and accuracy is maintained.

The paper limits particle shape approximation to smooth poly-ellipsoids.

Poly-ellipsoids provide asymmetry of particle shapes as compared to ellipsoids, thus allowing closer representation of real sand grain shapes that may be angular and unsymmetric. When incorporated in a DEM for computation, the poly-ellipsoids allow better representation of particle rolling, sliding and interlocking phenomena.

Method to construct poly-ellipsoid particle shapes from SMT data on real sands and computationally efficient DEM contact detection algorithm for poly-ellipsoids.

The swivel construction method is a specially designed process used to build bridges that cross rivers, valleys, railroads and other obstacles. To carry out this construction method safely, real-time monitoring of the bridge rotation process is required to ensure a smooth swivel operation without collisions. However, the traditional means of monitoring using Electronic Total Station tools cannot realize real-time monitoring, and monitoring using motion sensors or GPS is cumbersome to use.

This study proposes a monitoring method based on a series of computer vision (CV) technologies, which can monitor the rotation angle, velocity and inclination angle of the swivel construction in real-time. First, three proposed CV algorithms was developed in a laboratory environment. The experimental tests were carried out on a bridge scale model to select the outperformed algorithms for rotation, velocity and inclination monitor, respectively, as the final monitoring method in proposed method. Then, the selected method was implemented to monitor an actual bridge during its swivel construction to verify the applicability.

In the laboratory study, the monitoring data measured with the selected monitoring algorithms was compared with those measured by an Electronic Total Station and the errors in terms of rotation angle, velocity and inclination angle, were 0.040%, 0.040%, and −0.454%, respectively, thus validating the accuracy of the proposed method. In the pilot actual application, the method was shown to be feasible in a real construction application.

In a well-controlled laboratory the optimal algorithms for bridge swivel construction are identified and in an actual project the proposed method is verified. The proposed CV method is complementary to the use of Electronic Total Station tools, motion sensors, and GPS for safety monitoring of swivel construction of bridges. It also contributes to being a possible approach without data-driven model training. Its principal advantages are that it both provides real-time monitoring and is easy to deploy in real construction applications.

The purpose of this paper is to analyze how farmers are reducing vulnerability of rain‐fed agriculture to drought through indigenous knowledge systems (IKS) in the Atankwidi basin, north‐eastern Ghana.

This paper draws on combined qualitative and quantitative research methods and data. First, the paper draws on qualitative data generated from in‐depth interviews and focus group discussions from purposively sampled farmers in the Atankwidi basin. It also draws on a survey conducted on 131 systematically and randomly sampled households in three communities of the basin, namely Yua, Pungu and Mirigu.

The results show that farmers are planting multiple indigenous drought resilient crop varieties and employing different rounds of seeding and or staggering planting between multiple farms. They are also applying indigenous forms of organic manure, checking soil erosion through grass strips and stone terracing and adopting paddy farming for improving soil and water conservation towards enhancing plant adaptation to drought. The paper therefore, asserts that through conscientious effort, farmers are reducing vulnerability of rain‐fed agriculture to drought through indigenous knowledge systems of drought risk management.

The paper recommends that capacity for managing vulnerability to drought at the local level, including the Atankwidi basin, can be enhanced by incorporating IKS into District Development Planning (DDP) and giving priority to the strategic role of IKS in climate change adaptation planning.

This paper fulfills a need for researching the relevance of IKS for reducing vulnerability of rain‐fed agriculture to drought in particular, and enhancing adaptation to climate change in general in the quest for promoting Endogenous Development (ED) in Africa.