Search results

The purpose of this paper is to investigate the role of solid lubricants (graphite, coke, ZnS) on brake performance.

In this study, the tribological and surface characteristic of non‐asbestos organic type brake friction materials containing three different solid lubricants (graphite, coke, and ZnS) in different proportions were examined and evaluated experimentally. The coefficient of friction (COF) and wear behavior of the samples were tested on a chase‐type friction tester, and particular emphases were given to the effect of temperature and number of braking cycles on the COF. Each of the lubricants was added to the mixtures in different amounts and seven different brake linings were manufactured, provided that the total amount of solid lubricants and other ingredients were not changed. The worn surfaces of the specimens were analyzed using a scanning electron microscope with energy‐dispersive X‐ray microanalysis.

The experimental results indicate that graphite has a positive effect on the tribological properties of brake linings. However, brake linings containing higher concentrations of ZnS and coke showed an unstable friction coefficient relationship with the temperature and number of braking cycles. The formation of friction layers was detected on the friction surface of these samples, which indicates that an increase in coke and ZnS content increases the discontinuous and unstable friction film areas.

This paper fulfils the effects of solid lubricants (graphite, coke, ZnS) in brake friction materials with detailed tests and analysis.

The purpose of this paper is to find the influence of the initial braking velocity and braking frequency on the tribological performance of the non‐asbestos brake shoe used in mine hoisters during some continuous emergency brakings.

The tribological performance experiments of the WSM‐3 non‐asbestos brake shoe braking on the 16 Mn steel are investigated on the X‐DM friction tester, by simulating continuous emergency brakings of a mine hoister ten times. Three kinds of tribological indexes: friction coefficient, its stability coefficient, and wearing rate are considered to score the tribological performance of the brake shoe.

When the initial braking velocity increases, the mean friction coefficient of the brake shoe decreases at first, then rises, and falls again finally. But when the braking frequency exceeds seven times, the falling process of the friction coefficient at low‐velocity period does not appear again. Second, when the initial braking velocity is no higher than 10 m/s, the mean friction coefficient rises with the braking frequency increasing. But when the velocity exceeds 10 m/s, the mean friction coefficient rises with the braking frequency increasing at first, then falls. Third, when the initial braking velocity is no higher than 12.5 m/s, the friction coefficient of the brake shoe has quite a favorable stability with the coefficient is no bigger than 75 percent. But when the velocity exceeds 12.5 m/s, the stability of the friction coefficient is diminishing obviously. Fourth, the wearing rate of the brake shoe increases quickly, during the process that the velocity rising from 10 to 12.5 m/s, but increases much more slowly after that period.

The paper investigates the tribological performance of the WSM‐3 non‐asbestos brake shoe during some continuous emergency brakings and finds that, when the initial braking velocity is no higher than 12.5 m/s and the braking frequency is no more than seven times, the WSM‐3 non‐asbestos brake shoe has quite a high friction coefficient, a good friction stability, and a low‐wearing rate, which indicate that it is very appropriate for using in the disk brake of mine hoisters in China.

The purpose of this paper is to find the variations of brake lining's frictional performance with braking conditions, and their influence on the braking safety and reliability of automobiles.

As the semimetal brake lining is widely used currently in automobiles, it was selected as the experimental material. By simulating the braking conditions and environment of automobiles, some tribological experiments of the brake lining were investigated on the X‐DM friction tester, when it is paired with the friction disc made of gray cast iron. The influence of braking pressure, sliding velocity and surface temperature on the friction coefficient and its stability coefficient were studied in depth through experiments.

The friction coefficient decreases gradually with the increasing of braking pressure and sliding velocity when the surface temperature is naturally rising. It rises first then falls with the surface temperature rising and the maximal value appears at nearly 200°C. The stability of friction coefficient decreases obviously when the sliding velocity exceeds 30 m/s, the braking pressure exceeds 1.8 MPa and the surface temperature is over 200°C. Based on the experimental results, the authors consider that it is not reliable to execute an emergency braking only by rising the braking pressure when the automobile is driving with a high velocity. In order to reduce the bad influence of high temperature on frictional performance, some effective actions should be taken for cooling the friction disc. What is more, special attention should be paid to the decreasing of frictional stability during the braking with high velocity, pressure and temperature.

This paper studies the influence of braking conditions on friction coefficient and its stability of the semimetal brake lining for automobiles. It is believed that this research may have some actual guidance for enhancing the braking safety and reliability of automobiles.

The purpose of this paper is to describe some tribological experiments which were executed to find the influence of braking pressure on tribological performance of non‐asbestos brake shoe used in mine hoister during its emergency braking.

The WSM‐3 non‐asbestos brake shoe, which has been widely used in mine hoister, was selected as experimental material. Some tribological experiments of the brake shoe sliding on 16Mn steel were investigated on the X‐DM friction tester by simulating of emergency braking conditions of mine hoister. Three kinds of tribological indexes: friction coefficient, stability coefficient of friction coefficient, and wear rate were considered to score the tribological performance and the morphology of worn surfaces were observed through the S‐3000N scanning electron microscopy (SEM) to explore the tribological mechanisms.

It was found first, that the instant friction coefficient is not constant during emergency braking. After a short climbing period, it rises gradually to steady value. Second, with the increasing of braking pressure, the mean friction coefficient rises first then falls, while its stability coefficient falls gradually. The wear rate rises continuously with the braking pressure increasing. Also, the rising velocity of wear rate at high pressure is higher than it is at low pressure. Third, the instant surface temperature rises first then falls during braking and the mean surface temperature rises continuously with the braking pressure increasing.

It is found that the increasing of braking pressure within a certain range is helpful for achieving a high friction coefficient and a steady wear rate. But too high pressure will cause contrarily the falling of frictional performance and serious of wear performance. So it is not reliable to rise the braking pressure without limited during emergency braking.

In order to improve the braking safety of mine hoisters, this paper aims to focus on the continuous repetitious emergency braking conditions to investigate an abnormal frictional phenomena called “Frictional catastrophe (FC)” and its mechanisms.

The non‐asbestos brake shoe of a mine hoister was selected as frictional material and its paring material is 16Mn steel. The tribological properties of the brake shoe were tested on the pad‐on‐disc friction tester by the simulation of continuous emergency braking conditions. The thermal analysis experiments, the temperature field simulations and the SEM analysis of the brake shoe were accomplished to reveal the mechanisms of the FC.

It was found that the friction coefficient of the brake shoe sometimes falls suddenly during braking. This abnormal frictional phenomena is called “Frictional catastrophe (FC)”. It is considered that the friction heat, which is accumulated rapidly by the braking on the surface of the brake shoe, makes the surface layer material qualitatively change from the solid state to a mixed state composed of gases, liquids and solid. The frictional modality of the braking changes accordingly from dry friction to lubrication with gases and liquids. The sudden lubrication makes the friction coefficient fall suddenly and induces the FC phenomena.

An abnormal tribological phenomena called “Frictional catastrophe (FC)” was found in this paper. The investigations about the behaviors and mechanisms of the FC are considered helpful for improving the braking safety of mine hoisters and other machines.

This paper aims to thrash out friction and wear properties of automobile brake lining reinforced by lignin fiber and glass fiber in braking process.

ABAQUS finite element software was used to analyze thermo-mechanical coupled field of friction materials. XD-MSM constant speed friction testing machine was used to test friction and wear properties of friction material. Worn surface morphology and mechanism of friction materials were observed by using scanning electron microscope.

The results show that when the temperature was below 350°C, worn mechanism of MFBL was mainly fatigue wear and abrasive wear, and worn mechanism of GFBL was mainly fatigue wear because MFBL contained lignin fiber. Therefore, it exhibits better mechanical properties and friction and wear properties than those of GFBL.

Lignin fiber can improve mechanical properties and friction and wear properties of the automobile brake lining.

The purpose of this study is to investigate wet multi-disc brake temperature field and optimal oil supply under continuous braking condition. The oil supply of wet multi-disc brake has a direct impact on the drivability and fuel economy for tracked vehicles. Too small flow will result in the higher temperature and failure of brake while excessive one will lead to slow engagement increasing disengaged torque and the transmission efficiency could decline notably. The optimal oil supply and brake temperature field were obtained in this research.

This article investigated on the heat dissipation capability and optimal oil supply of the brake by the means of CFX model. The working condition was continuous braking and the lubricating and cooling factors were included in the model.

That the complex trends with increased oil flow is inconsistent with the traditional formula in which the effects of grooves were neglected. The fitting curve of optimal oil supply can predict various needed oil flow in various rotating speed and it provides a theoretical guidance for oil supply design.

Traditional empirical formula of heat transfer coefficient and Reynolds equation solved by different methods could be difficult to deal with the complex boundary conditions of wet multi-disc brake. CFX model can solve the problem of complex boundary condition. The optimal oil supply curve can provide a theoretical guidance for oil supply design.

The purpose of this paper is to study the influence of braking speed at –20 °C on the wear property of high-speed railway braking materials and the temperature also stress analyses of brake disc friction surface.

Friction brake tester was used to simulate the wear test of high-speed railway braking materials at diverse braking speeds (2,100, 2,400, 2,700 and 3,000 rad/min) at –20 °C and the stress and temperature analyses of brake disc friction surface were carried out by COMSOL.

Compared with 20°C, there is initial stress of brake disc friction surface before brake starting; also, the maximum wear depth is larger at –20°C. Besides, at –20 °C, with the rising of braking speed, the graphite particles on the friction surface of brake pad significantly reduce. And scratches and cracks are formed on brake pad friction surface. Besides, the abrasive wear, adhesive wear and thermal cracks of brake disc friction surface are aggravated. Moreover, the maximal worn depth also increase. Meanwhile, the highest temperature and the maximum thermal stress of brake disc friction surface both raise. Furthermore, the temperature and thermal stress gradients at radial direction of brake disc friction surface aggrandize, which makes the thermal cracks on brake disc friction surface further exacerbated.

In this paper, the wear property of the high-speed railway braking materials is studied by combining experiment and simulation. However, due to the low-speed traveling of high-speed railway was mainly studied in this paper, there may be no comprehensive simulation of the real running condition of high-speed railway. At the same time, the working condition of low-temperature environment cannot be completely simulated and controlled.

The research results of this paper provide a basic instruction for other researchers and also provide an important reference for relevant personnel to choose the braking speed of high-speed railway at –20 °C.

The research of this paper provides a brick for the study of high-speed railway braking materials and also provides some references for the safe service of trains in low-temperature environment.

This paper studied the wear property and carried out the simulation analysis of braking materials at –20 °C at diverse braking speed. The research findings provide an important reference for the selection of braking speed of high-speed railway at –20 °C.

The purpose of this paper is to investigate use of calabrian pine (pinus brutia) cone (CPC) dust along with borax (BX) to assess the effect of friction coefficient. Despite the number of research studies completed on the mechanism of friction in automotive brake lining materials, the phenomenon is still not fully understood. Complex mechano-chemical processes occurring on the friction interface of a composite friction material make it difficult to understand the correlation between the formulation of brake lining and the frictional performance.

In this study, the use of CPC dust along with BX has been investigated for assessing the effect on friction coefficient. CPC has resin in it. BX is a boron production which is widely used in boron glass production and in ceramic industry for increasing the heat- resistant and -forming abrasion resistant. Newly formulated brake lining material with five different ingredients has been tested under Friction Assessment and Screening Test. Friction coefficient, wear rate and scanning electron microscope for friction surface were examined to assess the performance of these samples.

Analysis of the experimental results shows that the brake lining material containing CPC and BX significantly improved the stability of the friction coefficient, fade and wear resistance.

Several investigations have been conducted to use different materials in brake pads. The brake pad standards have been provided in previous studies, as well as the aims for economical and sustainable production. In the present study, production of brake pads by CPC dust and BX has been executed. Parallel results have been presented between previously reported and present study, in view of brake characteristics and wear resistance. Use of the lower cost and productive organic sources of material are the main improvement of the present study.

The purpose of this study is to establish an effective method for characterizing the tribological properties of friction brakes during continuous braking because they have direct influences on the reliable operation of transport vehicles and industrial equipments.

First, tribological tests were carried out with the X-DM type friction tester, and changing curves of friction coefficient and temperature were obtained. Second, a novel tribological characteristic parameter set characterizing the tribological properties of brake pair in continuous braking was extracted from some important experimental data such as friction coefficient, wear rate and temperature. Finally, the influence of law and mechanism of braking number on dynamic tribological parameters was studied through continuous braking experiments.

The extracted tribological characteristic parameter set includes two subsets: dynamic characteristic parameter subset and overall characteristic parameter subset, which is composed of ten parameters: dynamic parameters of friction coefficient (including average, trend coefficient and stability coefficient), dynamic wear rate, dynamic average temperature, dynamic temperature rise, overall average friction coefficient, overall wear rate, overall average temperature and overall temperature rise.

Conclusively, the novel tribological characteristic parameter set is more comprehensive and objective, and it can provide a theoretical basis for the study of tribological properties in continuous braking.