Search results

Online fashion retailers offer body measurement guidance, alongside their target consumer body size charts and fit information, to help consumers select the right size garment as the garment cannot be tried on. Its use by retailers suggests it can act as a means of mitigating garment returns as there has been a noted increase in returns due to incorrect size selection even though body measurement instructions are provided online. The purpose of this research is to determine how consumers interact with body measurement guidance, how they interpret it and use it, thereby interrogating its efficacy.

An exploratory investigation was undertaken. Thirty participants were recruited and given a choice of fashion retailers' body measurement guidance and a tape measure. They took their body measurements over their clothes. A technician repeated the task, thereby providing two sets of body measurements. A paired t-test determined if there was a significant difference in both values in terms of their mean. Technicians also documented their observations of how the participants interacted with the task. The content of the fashion retailer measurement guidance was then compared to that of published anthropometric guidance for surveys.

Participants were familiar with the guidance and tape-measure; they were able to self-measure. The fashion retailer measurement guidance, however, lacked detail/clarity in visuals and written content when compared to anthropometric guidance. Interpretation of the guidance differed between participant and technician. This resulted in a significant difference in circumference measurements for the bust/chest and hips, yet no significant difference in waist and inside-leg measurements. For measurements that were difficult to take unaided, participants devised novel practices which resulted in little divergence from the technician taken body measurements. The results question the guidance efficacy in its current form.

There has been no study which addresses how consumers interpret and interact with fashion retailers' online measurement guidance. This is important as this can mitigate garment returns. This research provides insight to influence fashion retailers' measurement guidance policy. It also adds to the existing body of knowledge surrounding anthropometric practice for clothing.

The findings indicated that fashion retailers need to revise their body measurement guidance content. The content needs to be more comprehensive but still use accessible language and visuals. The broader implications of this study highlight that traditional anthropometrics for self-taken body measurement needs developing as an emerging concept through clothing-related academic study.

Fashion retailers' measurement guidance needs to be more comprehensive but still use accessible language and visuals. The broader implications of this study highlight that traditional anthropometrics for self-taken body measurement needs further investigation and documentation as an emerging concept through clothing-related academic study.

This paper aims to investigate fit problems with some ready-to-wear garments, analyse the body measurements of Ethiopian young female consumers and draw implications for the improvement of ready-to-wear garment fit.

A random sample of 970 university students aged 18–35 years were interviewed, and their 35 body dimensions were measured manually according to the procedures in ISO 8559: 2017. The fit problems and body measurements were examined with the body mass index (BMI) and ethnicity of the subjects. Moreover, 15 body dimensions were compared with that of Chinese and US females of similar age.

The results showed that fit problems are frequent in lower garments for underweight consumers. Nearly consistent and smaller differences in body measurements were observed with BMIs and ethnicity of the subjects, while inconsistent and larger differences were found among the subjects from the three countries. The Ethiopian subjects were smaller than the Chinese in height and weight, between the Chinese and US females in most body measurements, and larger than the US subjects in across shoulder and arm and shoulder lengths. The results alarm the need for the development of Ethiopian national garment size standards.

The paper relates ready-to-wear garment fit issues to demographic factors and demographic factors to body measurements. Moreover, it considers young female consumers in Ethiopia, an African country with less explored consumer needs for clothing.

This study aims to explore some benefits and challenges of establishing an international accreditation for teacher education institutions (TEIs) by AsTEN Quality Assurance Agency. This specific accreditation agency is expected to improve the quality of teaching, learning and research at TEIs in ASEAN region.

The qualitative study generates data from questionnaires and online semi-structured interviews among ASEAN academics. They work as teacher educators in Indonesia, Singapore, Thailand and Malaysia.

As findings show, participating academics from Indonesia, Singapore, Malaysia, the Philippines, Thailand and Brunei Darussalam believe that it is necessary to have a specific international accreditation agency that can properly accommodate particular standards of teacher education. This accommodation is expected to increase the governance of quality teaching, learning and researching to prepare more competent and professional future teachers. Participating academics also acknowledge some potential challenges this specific accreditation agency may have, including local acceptance by national governments in ASEAN region and global acknowledgement from international accrediting agencies, mostly based in Global North countries.

The study only involves academics in five ASEAN countries of Indonesia, Malaysia, Singapore, Thailand and the Philippines so that it may have less international acceptance.

The study also identifies aspects and mechanisms of blended online-onsite international accreditation application for TEIs, which grows its significance because of technological advancement, efficiency and prolonged COVID-19 pandemic.

The study provides a digital accreditation system for TEIs, particularly in ASEAN region. This originality is important in this era of Internet of Things.

The purpose of this paper is to explore the distribution of local thermal sensitivity of human body heating and the local preferred heating temperature, and the influence of this sensitive division on thermal response when heating human body in cold environment.

Eight subjects were invited to use carbon fiber heating patches in an environment of 5 and RH 50%, and eight body parts were selected to explore the heating sensitivity. By measuring the skin temperature and evaluating the subjective thermal sensation and thermal comfort, the thermal sensitivity of local body segments and the influence of single-zone and double-zone heating on human thermal response were explored.

The sensitivity of local heating on overall thermal sensation (OTS) was foot > back > chest > abdomen > waist > elbow > hand > knee. Both single-zone and double-zone heating can improve the OTS, but double-zone heating can reach thermal neutrality and thermal comfort. In order to prevent the high temperature of heating patches from damaging human body, the local skin temperature should be monitored in the design of local heating clothing, and 39.6 should be taken as the upper limit of local skin temperature.

The results provide a theoretical basis for the selection of heating position in local electric heating clothing (EHC) and the design of intelligent temperature adjustment heating clothing, improve the performance of local EHC and reduce energy consumption.

This study aims to explore the level of independence among persons with disabilities (PWDs) towards their use of public buildings’ facilities, as well as assess the anxiety and relevant challenges regarding such use.

In a cross-sectional survey design, 91 consenting PWDs were recruited via purposive sampling at diverse locations and invited to complete self-report questionnaires on their use of public buildings’ facilities.

Only 19 PWDs (20.9%) were able to independently use such facilities. The participants’ level of anxiety, observed to be mostly severe (41.7%), was significantly associated with sex and affected body region (p < 0.05). Most PWDs identified “lack of amenities” (85.7%), “inconvenience” (78%) and “safety issues” (59.4%) as relevant challenges towards the use of public buildings’ facilities.

This research emphasises the urgent need to universally improve PWDs’ level of independence towards the use of public buildings’ facilities alongside eradicating anxiety and challenges experienced towards such use. Accessibility ought to be promoted among PWDs, with specific attention given to women and those affected in multiple body regions; as such populations are prone to experiencing substantial anxiety. This approach should entail the provision of barrier-free facilities as well as ensuring their safe and convenient use by PWDs.

This study sought and provided key feedback from PWDs on the current built environment, which ought to be considered by relevant stakeholders to improve accessibility, promote well-being and contribute towards meeting the global goals of reducing inequality and making cities/communities inclusive, safe, resilient and sustainable.

This paper aims to address the development and implementation of “AltPrint,” a slicing algorithm based on a new filling process planning from a variation in the deposited material geometry. AltPrint enables changes in the extruded material flow toward local variations in stiffness. The technical feasibility evaluation was conducted experimentally by fused filament fabrication (FFF) process of snap-fit subjected to a mechanical cyclical test.

The methodology is based on the estimation of the parameter E from the mathematical relationships among the variation of the material in the material flow, nozzle geometry and extrusion parameters. Calibration, validation and analysis of the printed specimens were divided into two moments, of which the first refers to the material responses (flexural and dynamic mechanical analysis) and the second involves the analysis of the printed components with localized flow properties (for estimating the response to cyclic loading). Finite element analysis assisted in the comparison of two snap-fit geometries, one traditional and one generated by AltPrint. Finally, three examples of compliant mechanisms were developed to demonstrate the potential of the algorithm in the generation of functional prototypes.

The contribution of AltPrint is the variable fill width integrated with the slicing software that varies the print parameters in different regions of the object. The alternative extrusion method based on material rate variation was conceived as an “open software” available in GitHub platform, hence, open manufacturing with initial focus on desktop 3D printer based on FFF. The slicing method provides deposited variable-width segments in an organized and replicable filling strategy, resulting in mechanical properties variations in specific regions of a part. It was implemented and evaluated experimentally and indicated potential applications in parts manufactured by the additive process based on extrusion, which requires local flexibilities.

This paper presents a new alternative method for application in an open additive manufacturing context, specifically for additive extrusion techniques that enable local variations in the material flow. Its potential for manufacturing functional parts, which require flexibility due to cyclic loading, was demonstrated by fabrication and experimental evaluations of parts made in acrylonitrile butadiene styrene filament. The changes proposed by AltPrint enable geometric modifications in the response of the printed parts. The proposed slicing and filling control of parameters is inserted in a context of design for additive manufacturing and shows great potential in the area of product design.

South Asia is one of the fastest-growing regions in the world. With its fast economic development, the energy requirement for the region has rapidly grown. As the region relies mainly on nonrenewable energy sources and is suffering from issues like pollution, the high cost of energy imports, depleting foreign reserves, etc. it is searching for those factors that can help enhance the renewable energy generation for the region. Thus, taking these issues into consideration, this paper aims to investigate the impact of macroeconomic factors that can contribute to the enhancement of renewable energy output in South Asia.

An autoregressive distributed lag methodology has been applied to examine the long-term effects of remittance inflows, literacy rate, energy imports, government expenditures and urban population growth on the renewable energy output of South Asia by using time series data from 1990 to 2021.

The findings indicated that remittance inflows have a negative and insignificant long-term effect on renewable electricity output. While it was discovered that energy imports, government spending and urban population growth have negative but significant effects on renewable electricity output, literacy rates have positive and significant effects.

Considering the importance of renewable energy, this is one of the few studies that has included critical macroeconomic variables that can affect renewable energy output for the region. The findings contribute to the body of knowledge that a high literacy level is crucial for promoting renewable energy output, while governments and policymakers should prioritize reducing energy imports and ensuring that government expenditures on renewable energy output are properly used. SAARC, the governing body of the region, also benefits from this study while devising the renewable energy output policies for the region.

Since most of the existing literature do not disclose the node coordinate data of its fixed-wing aircraft airfoil, in order to develop and obtain a practical and suitable deformation airfoil for fixed-wing micro air vehicle (MAV), this paper proposes an improved airfoil design method of fixed-wing MAV based on the profile data of S5010 airfoil.

Combined with the body shape variation of the stingray in the propulsion process, the parametric study of the aerodynamic shape of the original design airfoil is carried out to explore the influence of a single parameter change on the aerodynamic performance of the airfoil. Then, according to the influence law of single parameter variation on the aerodynamic performance of the airfoil, the original airfoil is synthetically deformed by changing multiple parameters.

By comparing the aerodynamic performance of the multi-parameter deformed airfoil with the original airfoil, it is found that the lift coefficient of the multi-parameter deformed airfoil changes from negative to positive value when AOA = 0°. When AOA = 2°, the lift coefficient growth rate is the largest, which is 47.27%, and the lift-to-drag ratio is increased by 50.00%. At other angles of attack, the lift, drag, and torque coefficients of the multi-parameter deformed airfoil are optimized to some extent.

Combined the body shape variation of the stingray in the propulsion process, the parametric study of the aerodynamic shape of the original design airfoil is carried out to explore the influence of a single parameter change on the aerodynamic performance of the airfoil.

In certain industrial operations, workers are required to stand for a prolonged duration. This leads to muscular fatigue in the legs, posing a threat to the productivity and well-being of the workers. This paper aims to address this problem of women in the clothing industry with an exoskeleton designed for lower extremities and improve productivity.

Ulrich’s product design approach has been followed with suitable modifications. The methodology involves a study to justify the need for this product and terminating at the physical and virtual evaluations of the product. Required anthropometric parameters are considered along the design process.

The exoskeleton discussed in this paper is an innovative product made of Aluminium 6061 alloy. During the simulation phase of the product, total von-mises stresses to a part bearing 1 leg were 31.5 MPa, 94.7 MPa and 284 MPa for aluminium, SS308 and springs, respectively. These values are below the yield limit by a great margin. Based on a user survey of this product, 72% of the targeted customers were interested in buying. Also, comparing electromyography (EMG) mean value of the voltage between workers’ leg with and without exoskeleton revealed that there was an improvement in the voltage by 2.5% when exoskeleton was used.

This paper emphasizes, for the first time – the necessity of an exoskeleton indigenized for the Indian population and the process of realizing it by designing an exoskeleton.

The inward displacement perpendicular to the body surface produced by compression garment is an important index to evaluate pressure comfort and optimal design of tight clothing products. The purpose of this study is to explore the pressure distribution state at waist position of elastic legwear and then to solve the common problem of excessive pressure or easy slippage for waist of elastic legwear.

In this paper, the authors obtained the waist cross-section model of human body using CT scanning and mimics modeling and then simulated the pressure and displacement distribution after wearing sample four elastic legwear using finite element method. The dressing process of elastic legwear was divided into six periods (instantaneous, 1, 2, 4, 8 and 12 h) in this study, and the finite element software ANSYS was used to simulate the displacement and deformation of the waist cross section. The authors finally obtained the functional relationship between pressure/displacement ratio and angle using curve fitting.

In this paper, the authors obtained the functional relationship between pressure/displacement ratio and angle using curve fitting. Comparison found that the “pressure/displacement–angle” function curve showed an almost consistent trend at any time. That was to say, when the human body was in the state of clothing pressure, the corresponding displacement value of the human body can be calculated by the curve equation under the premise of known pressure value.

This study solves the difficult problem which hard to measure displacement values by conventional methods due to the small deformation of the human body after dressing the compression garment. Conclusions also provide a theoretical reference for evaluating pressure comfort and optimizing clothing structure for the elastic legwear, and this method is also applicable to other types of compression garment.