Search results

The purpose of this paper is to investigate the design method of partial observer canonical form (POCF), which is one of the important research tools for industrial plants.

Motivated by the two-steps method proposed in Xu et al. (2020), this paper extends this method to the case of Multi-Input Multi-Output (MIMO) nonlinear system. It decomposes the original system into two subsystems by observable decomposition theorem first and then transforms the observable subsystem into OCF. Furthermore, the necessary and sufficient conditions for the existing of POCF are proved.

The proposed method has a wide range of applications including completely observable nonlinear system, noncompletely observable nonlinear system, autonomous nonlinear system and forced nonlinear system. Besides, comparing to the existing results (Saadi et al., 2016), the method requires less verified conditions.

The new method concerning design POCF has better plants compatibility and less validation conditions.

The purpose of this paper is to develop a quantitative risk assessment method for agricultural products cold chain logistics to assess the condition of the fresh agricultural products cold chain process objectively and accurately.

A risk assessment index system of agricultural products cold chain logistics is designed on the basis of the risk identification for the process of agricultural products cold chain logistics. This paper first uses catastrophe progression method and a new maximum deviation method to build an improved catastrophe progression assessment model for agricultural products cold chain logistics. In order to verify the reliability and validity of the model, two representative enterprises are selected as the case in the study.

The results in the empirical research indicate strong support for the assessment model and coincide with the reality. The risk assessment index system can also reflect the key risk factors from agricultural products cold chain logistics scientifically. In addition, the improved catastrophe progression assessment method proposed in this paper can be scientific and reasonable to predict risk.

This paper contributes to provide a new risk assessment model for agricultural products cold chain logistics. The new model overcomes the limitation of subjective empowerment and it increases the objectivity and scientificity in the process of cold chain logistics risk assessment. This paper also shows that practitioners involved in the field of products cold chain logistics can manage the potential risk by a set of scientific methods for assessing the risk before the accident.

The paper provides a practical guideline to practitioners, especially for cold chain logistics managers, relevant management departments, and cold chain logistics management consultants. It is proved that the new risk assessment method and the risk assessment index system of agricultural products cold chain logistics can help them assess the risk scientifically and reasonably.

Although the calculation is simple, the new model can overcome the limitation of subjective empowerment scientifically and reasonably, and thus has important practical value.

Vision, audition, olfactory, tactile and taste are five important senses that human uses to interact with the real world. As facing more and more complex environments, a sensing system is essential for intelligent robots with various types of sensors. To mimic human-like abilities, sensors similar to human perception capabilities are indispensable. However, most research only concentrated on analyzing literature on single-modal sensors and their robotics application.

This study presents a systematic review of five bioinspired senses, especially considering a brief introduction of multimodal sensing applications and predicting current trends and future directions of this field, which may have continuous enlightenments.

This review shows that bioinspired sensors can enable robots to better understand the environment, and multiple sensor combinations can support the robot’s ability to behave intelligently.

The review starts with a brief survey of the biological sensing mechanisms of the five senses, which are followed by their bioinspired electronic counterparts. Their applications in the robots are then reviewed as another emphasis, covering the main application scopes of localization and navigation, objection identification, dexterous manipulation, compliant interaction and so on. Finally, the trends, difficulties and challenges of this research were discussed to help guide future research on intelligent robot sensors.

The main purpose of this paper is to analyze a tourist destination using sentiment analysis techniques with data from Twitter and Instagram to find the most representative entities (or places) and perceptions (or aspects) of the users.

The authors used 90,725 Instagram posts and 235,755 Twitter tweets to analyze tourism in Granada (Spain) to identify the important places and perceptions mentioned by travelers on both social media sites. The authors used several approaches for sentiment classification for English and Spanish texts, including deep learning models.

The best results in a test set were obtained using a bidirectional encoder representations from transformers (BERT) model for Spanish texts and Tweeteval for English texts, and these were subsequently used to analyze the data sets. It was then possible to identify the most important entities and aspects, and this, in turn, provided interesting insights for researchers, practitioners, travelers and tourism managers so that services could be improved and better marketing strategies formulated.

The authors propose a Spanish-Tourism-BERT model for performing sentiment classification together with a process to find places through hashtags and to reveal the important negative aspects of each place.

The study enables managers and practitioners to implement the Spanish-BERT model with our Spanish Tourism data set that the authors released for adoption in applications to find both positive and negative perceptions.

This study presents a novel approach on how to apply sentiment analysis in the tourism domain. First, the way to evaluate the different existing models and tools is presented; second, a model is trained using BERT (deep learning model); third, an approach of how to identify the acceptance of the places of a destination through hashtags is presented and, finally, the evaluation of why the users express positivity (negativity) through the identification of entities and aspects.

这项工作的主要目的是使用情感分析技术和来自 Twitter 和 Instagram 的数据来分析旅游目的地, 以便找到最具代表性的实体（或地点）和用户的感知（或方面）。

我们使用 90,725 个 Instagram 帖子和 235,755 个 Twitter 推文来分析格拉纳达（西班牙）的旅游业, 以确定旅行者在两个社交媒体网站上提到的重要地点和看法。我们使用了几种方法对英语和西班牙语文本进行情感分类, 包括深度学习模型。

测试集中的最佳结果是使用来自Transformers (BERT) 模型的双向编码器表示 (BERT) 用于西班牙语文本和Tweeteval 用于英语文本, 这些结果随后用于分析我们的数据集。然后可以确定最重要的实体和方面, 这反过来又为研究人员、从业人员、旅行者和旅游管理者提供了有趣的见解, 从而可以改进服务并制定更好的营销策略。

我们提出了一个用于执行情感分类的西班牙旅游 BERT 模型, 以及通过主题标签找到地点并揭示每个地点的重要负面方面的过程。

该研究使管理人员和从业人员能够使用我们发布的西班牙旅游数据集实施西班牙-BERT 模型, 以便在应用程序中采用该数据集, 以找到正面和负面的看法。

本研究提出了一种如何在旅游领域应用情感分析的新方法。首先, 介绍了评估不同现有模型和工具的方法; 其次, 使用 BERT（深度学习模型）训练模型; 第三, 提出了如何通过标签识别目的地地点的接受度的方法, 最后通过实体和方面的识别来评估用户表达积极性（消极性）的原因。

This contribution explores intergenerational relations and negotiations in Viet-German families. Due to family members' diverging socialization experiences in Vietnam and Germany as well as social ties in both societies, we assume that different ideas of intergenerational relations and mutual obligations may be found in Viet-German families. We distinguish between interdependent and independent intergenerational patterns of solidarity. Based on interviews with young adults – the descendants of Vietnamese migrants – four thematic areas are identified, in and through the shaping of which intergenerational relations are continuously negotiated at the face of migration-related challenges. These are (1) a childhood for the future, (2) reciprocal support, (3) individualization of family members and intimization of the family and (4) boundaries against kinship and the Vietnamese community. Our analysis reveals the emergence of a new, hybrid pattern of intergenerational solidarity, for which we suggest the term “individualized interdependence.” The role of young adults in the elaboration of this new family order stands out.

This research studies the behavior choice of key actors in the construction supply chain and constructs a model which includes the benefit function of the government, contractors and owners, aiming at improving the coverage of green buildings.

In this paper, tripartite dynamic game is studied and simulated based on duplicate dynamic equation. The tripartite game under government intervention is rarely considered, and government punishment measures are seldom introduced into the research.

According to the simulation results, the practical insights in line with the development of green supply chain are put forward. Rewards and punishments affect the development of the supply chain. New technologies and new materials accelerate the development of green supply chain and then improve the coverage of green buildings.

This paper constructs a dynamic model based on complete information rationality, which is difficult to realize in practice, for information is incomplete and human rationality is limited.

In fact, the government has not issued a punishment document to introduce a new variable adjustment model.

Research on grey systems is becoming more sophisticated, and grey relational and prediction analyses are receiving close review worldwide. Particularly, the application of grey systems in marine economics is gaining importance. The purpose of this paper is to summarize and review literature on grey models, providing new directions in their application in the marine economy.

This paper organized seminal studies on grey systems published by Chinese core journal database – CNKI, Web of Science and Elsevier from 1982 to 2018. After searching the aforementioned database for the said duration, the authors used the CiteSpace visualization tools to analyze them.

The authors sorted the studies according to their countries/regions, institutions, keywords and categories using the CiteSpace tool; analyzed current research characteristics on grey models; and discussed their possible applications in marine businesses, economy, scientific research and education, marine environment and disasters. Finally, the authors pointed out the development trend of grey models.

Although researches are combining grey theory with fractals, neural networks, fuzzy theory and other methods, the applications, in terms of scope, have still not met the demand. With the increasingly in-depth research in marine economics and management, international marine economic research has entered a new period of development. Grey theory will certainly attract scholars’ attention, and its role in marine economy and management will gain considerable significance.

The purpose of this paper is to have a review on the analysis of information diffusion based on evolutionary game theory. People now get used to interact over social networks, and one of the most important functions of social networks is information sharing. Understanding the mechanisms of the information diffusion over social networks is critical to various applications including online advertisement and rumor control.

It has been shown that the graphical evolutionary game theory (EGT) is a very efficient method to study this problem.

By applying EGT to information diffusion, the authors could predict every small change in the process, get the detailed dynamics and finally foretell the stable states.

In this paper, the authors provide a general review on the evolutionary game-theoretic framework for information diffusion over social network by summarizing the results and conclusions of works using graphical EGT.

This paper aims to review recent research in design for additive manufacturing (DfAM), including additive manufacturing (AM) terminology, trends, methods, classification of DfAM methods and software. The focus is on the design engineer’s role in the DfAM process and includes which design methods and tools exist to aid the design process. This includes methods, guidelines and software to achieve design optimization and in further steps to increase the level of design automation for metal AM techniques. The research has a special interest in structural optimization and the coupling between topology optimization and AM.

The method used in the review consists of six rounds in which literature was sequentially collected, sorted and removed. Full presentation of the method used could be found in the paper.

Existing DfAM research has been divided into three main groups – component, part and process design – and based on the review of existing DfAM methods, a proposal for a DfAM process has been compiled. Design support suitable for use by design engineers is linked to each step in the compiled DfAM process. Finally, the review suggests a possible new DfAM process that allows a higher degree of design automation than today’s process. Furthermore, research areas that need to be further developed to achieve this framework are pointed out.

The review maps existing research in design for additive manufacturing and compiles a proposed design method. For each step in the proposed method, existing methods and software are coupled. This type of overall methodology with connecting methods and software did not exist before. The work also contributes with a discussion regarding future design process and automation.

This paper aims to report on the findings of an investigation to compare three different three-dimensional printing (3DP) or additive manufacturing technologies [i.e. fused deposition modeling (FDM), stereolithography (SLA) and material jetting (MJ)] and four different equipment (FDM, SLA, MJP 2600 and Object 260) in terms of their dimensional process capability (dimensional accuracy and surface roughness). It provides a comprehensive and comparative understanding about the level of attainable dimensional accuracy, repeatability and surface roughness of commonly used 3DP technologies. It is expected that these findings will help other researchers and industrialists in choosing the right technology and equipment for a given 3DP application.

A benchmark model of 5 × 5 cm with several common and challenging features, such as around protrusion and hole, flat surface, micro-scale ribs and micro-scale long channels was designed and printed repeatedly using four different equipment of three different 3DP technologies. The dimensional accuracy of the printed models was measured using non-contact digital measurement methods. The surface roughness was evaluated using a digital profilometer. Finally, the surface quality and edge sharpness were evaluated under a reflected light ZEISS microscope with a 50× magnification objective.

The results show that FDM technology with the used equipment results in a rough surface and loose dimensional accuracy. The SLA printer produced a smoother surface, but resulted in the distortion of thin features (<1 mm). MJ printers, on the other hand, produced comparable surface roughness and dimensional accuracy. However, ProJet MJP 3600 produced sharper edges when compared to the Objet 260 that produced round edges.

This paper, for the first time, provides a comprehensive comparison of three different commonly used 3DP technologies in terms of their dimensional capability and surface roughness without farther post-processing. Thus, it offers a reliable guideline for design consideration and printer selection based on the target application.