Search results
1 – 10 of over 1000Audu Ibrahim Ali, Mohd Kameil Abdul Hamid, Mohd Azman Bin Abas, Mohd Farid Muhamad Said, Anthony Chukwunonso Opia, Izhari Izmi Bin Mazali and Zul Hilmi Bin Che Daud
Due to the environmental issues caused by petroleum lubricants used in lubrication, the concept of creating various bio-lubricants requires research globally. Thus, this study…
Abstract
Purpose
Due to the environmental issues caused by petroleum lubricants used in lubrication, the concept of creating various bio-lubricants requires research globally. Thus, this study aims to develop, characterize and test the base ficus carica oil (fig oil) for its ethylene vinyl acetate copolymer (EVA) and sodium dodecylbenzene sulfonate (SDBS) content.
Design/methodology/approach
The sample characterization was done using the Fourier transmission infrared spectrum, whereas the morphologies of the EVA, SDBS particles and lubricated surfaces were carried out under scanning electron microscope equipment. To ensure the homogeneity of the solution (base oil and additives), the formulations were subjected to the sonication process. The anti-friction and anti-wear properties of EVA and SDBS particles as lubricant additives were investigated using a ball on a flat high-frequency reciprocating rig tribo-tester.
Findings
According to the findings, the base oil’s anti-friction and anti-wear capabilities can be greatly enhanced by the additions. revealed that the best results were obtained when 1.2% EVA + 2% SDBS was applied for the examination of wear (597.8 µm) and friction coefficient (0.106). Commercial references were used, nevertheless, and the results were excellent. This is because the particles in the contact area during lubrication have strong solubility and quickly penetrate the contact zone. The lubricating mechanisms were explained by a tribological model of the EVA + SDBS and SDBS particles.
Research limitations/implications
The coefficient of friction and wear reduction caused by the use of the additives will certainly enhance system performance and protect the machine components from excessive wear that could cause damage or failure.
Originality/value
The originality and uniqueness of this work are officially affirmed by the authors. The authors’ autonomous and original contribution to the development of sustainable lubrication is represented in this work. To the best of the authors’ knowledge, no other study has been published or made publicly available that duplicates the precise scope and goals of our research, and this conclusion is based on a thorough literature assessment.
Details
Keywords
Amanda Norazman, Zulhanafi Paiman, Syahrullail Samion, Muhammad Noor Afiq Witri Muhammad Yazid and Zuraidah Rasep
The purpose of this paper is to investigate the performance of bio-based lubricants (BBL), namely, palm mid-olein (PMO) enriched with an antioxidant agent…
Abstract
Purpose
The purpose of this paper is to investigate the performance of bio-based lubricants (BBL), namely, palm mid-olein (PMO) enriched with an antioxidant agent, tertiary-butylhydroquinone (TBHQ) and a viscosity improver, ethylene-vinyl acetate (EVA), in journal bearing (JB) applications.
Design/methodology/approach
Samples of the BBL were prepared by blending it with TBHQ and EVA at various blending ratios. The oxidative stability (OS) and viscosity of the BBL samples were examined using differential scanning calorimetry and a viscometer, respectively. Meanwhile, their performance in JB applications was evaluated through the use of a JB test rig with a 0.5 length-to-diameter ratio at various operating conditions.
Findings
It was found that the combination of PMO + TBHQ + EVA demonstrated a superior oil film pressure and load-carrying capacity, resulting in a reduced friction coefficient and a smaller attitude angle compared to the use of only PMO or VG68. However, it was observed that the addition of TBHQ and EVA to the PMO did not have a significant impact on the minimum oil film thickness.
Practical implications
The results would be quite useful for researchers generally and designers of bearings in particular.
Originality/value
This study used PMO as the base stock, and its compatibility with TBHQ and EVA was investigated in terms of its OS and viscosity. The performance of this treated BBL was evaluated in a hydrodynamic JB.
Peer review
The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-11-2023-0363/
Details
Keywords
Rami Zeitun and Ousama Abdulrahman Anam
This paper aims to investigate the effect of product offering and other service quality (SQ) dimensions on the satisfaction of the customers of both Islamic and conventional…
Abstract
Purpose
This paper aims to investigate the effect of product offering and other service quality (SQ) dimensions on the satisfaction of the customers of both Islamic and conventional banks, using evidence from an oil-based economy that is based on a prolonged SERVQUAL model with 11 dimensions and other statistical analysis methods.
Design/methodology/approach
The data were collected from 461 Islamic and conventional bank customers in Qatar via a survey and several tests were used to test certain hypotheses. Component analysis, factor analysis and gap and ascendency analysis were used in this study. Afterward, a correlation analysis and regression model were used to examine the hypotheses and validate the instruments used.
Findings
The results show that regardless of the type of bank, customers always have greater expectations of the services than they had perceived. A customer’s expectation of the product on offer is the only dimension that is significantly different in relation to the two types of banks. However, reliability, competence, responsiveness, credibility and empathy dimensions are significantly different of the two types of banks in customers’ perception of quality. In addition, the results suggest that both types of banks need to concentrate their efforts on the product offering, competence and courtesy dimensions.
Research limitations/implications
The size of our sample of Islamic and conventional banks is unequally balanced. Future studies might therefore choose an equally balanced sample.
Practical implications
Bank managers in both types of banks need to continue improving the quality of their service including product offering and to adopt advanced methods to enhance customer satisfaction (CS) and reduce the gaps in quality in the dimensions used. Furthermore, managers in both types of banks need to put more emphasis on product offering, competence, courtesy and communication if they wish to improve SQ. Moreover, Islamic banks must guarantee that they possess competent, highly trained personnel who are familiar with Islamic finance products, so as to enhance the quality of service and attract customers.
Originality/value
To the best of the author’s knowledge, this is the first study to investigate the effect of product offering and other dimensions of SQ on CS in both Islamic and conventional banks by using 11 dimensions of SQ. In addition, it provides evidence of gaps in SQ, at the dimensions level, for both types of banks in an oil-based economy. The results of this study are valuable in helping decision-makers and bank managers who wish to raise the level of SQ and improve CS and in validating the results from other countries with a dual financial system.
Details
Keywords
This study examines the value implications of oil price uncertainty for investors in diversified firms using a sample of 922 USA firms from 2001 to 2019.
Abstract
Purpose
This study examines the value implications of oil price uncertainty for investors in diversified firms using a sample of 922 USA firms from 2001 to 2019.
Design/methodology/approach
Our study employs a panel dataset to examine the value implications of oil price uncertainty for diversified firm investors. We consider several alternative specifications to account for unobserved factors and measurement errors that could potentially bias our results. In particular, we use alternative measures of the excess value of diversified firms and oil price uncertainty, additional control variables, fixed-effects models, the Oster test, impact threshold for confounding variable (ITCV) analysis, two-stage least square instrumental variable (2SLS-IV) analysis and the system-GMM model.
Findings
We find that the excess value of diversified firms, relative to a benchmark portfolio of single-segment firms, increases with high oil price uncertainty. The impact of oil price uncertainty is asymmetric, as corporate diversification is value-increasing for diversified firm investors only when the volatility is due to positive oil price changes and amidst supply-driven oil price shocks. The excess value increases irrespective of diversified firms’ financial constraints and oil usage. Diversified firms become conservative in their internal capital allocations with high oil price uncertainty. Such conservatism is value-increasing for diversified firm investors, as it supports higher performance in response to oil price uncertainty.
Originality/value
Our study has three important implications: first, they are relevant to investors in understanding the portfolio value implications of oil price uncertainty. Second, they are helpful for firm managers while comprehending the value-relevant implications of internal capital allocations. Finally, our findings are policy relevant in the context of the future of diversified firms in developed markets.
Details
Keywords
Ziyan Lu, Feng Qiu, Hui Song and Xianguo Hu
This paper aims to solve the problems molybdenum disulfide (MoS2) nanosheets suffer from inadequate dispersion stability and form a weak lubricating film on the friction surface…
Abstract
Purpose
This paper aims to solve the problems molybdenum disulfide (MoS2) nanosheets suffer from inadequate dispersion stability and form a weak lubricating film on the friction surface, which severely limits their application as lubricant additives.
Design/methodology/approach
MoS2/C60 nanocomposites were prepared by synthesizing molybdenum disulfide (MoS2) nanosheets on the surface of hydrochloric acid-activated fullerenes (C60) by in situ hydrothermal method. The composition, structure and morphology of MoS2/C60 nanocomposites were characterized. Through the high-frequency reciprocating tribology test, its potential as a lubricant additive was evaluated.
Findings
MoS2/C60 nanocomposites that were prepared showed good dispersion in dioctyl sebacate (DOS). When 0.5 Wt.% MoS2/C60 was added, the friction reduction performance and wear resistance improved by 54.5% and 62.7%, respectively.
Originality/value
MoS2/C60 composite nanoparticles were prepared by in-situ formation of MoS2 nanosheets on the surface of C60 activated by HCl through hydrothermal method and were used as potential lubricating oil additives.
Peer review
The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-10-2023-0321/
Details
Keywords
Ashish Paul, Bhagyashri Patgiri and Neelav Sarma
Flow induced by rotating disks is of great practical importance in several engineering applications such as rotating heat exchangers, turbine disks, pumps and many more. The…
Abstract
Purpose
Flow induced by rotating disks is of great practical importance in several engineering applications such as rotating heat exchangers, turbine disks, pumps and many more. The present research has been freshly displayed regarding the implementation of an engine oil-based Casson tri-hybrid nanofluid across a rotating disk in mass and heat transferal developments. The purpose of this study is to contemplate the attributes of the flowing tri-hybrid nanofluid by incorporating porosity effects and magnetization and velocity slip effects, viscous dissipation, radiating flux, temperature slip, chemical reaction and activation energy.
Design/methodology/approach
The articulated fluid flow is described by a set of partial differential equations which are converted into one set of higher-order ordinary differential equations (ODEs) by using convenient conversions. The numerical solution of this transformed set of ODEs has been spearheaded by using the effectual bvp4c scheme.
Findings
The acquired results show that the heat transmission rate for the Casson tri-hybrid nanofluid is intensified by, respectively, 9.54% and 11.93% when compared to the Casson hybrid nanofluid and Casson nanofluid. Also, the mass transmission rate for the Casson tri-hybrid nanofluid is augmented by 1.09% and 2.14%, respectively, when compared to the Casson hybrid nanofluid and Casson nanofluid.
Originality/value
The current investigation presents an educative response on how the flow profiles vary with changes in the inevitable flow parameters. As per authors’ knowledge, no such scrutinization has been carried out previously; therefore, our results are novel and unique.
Details
Keywords
Irina Alexandra Georgescu, Simona Vasilica Oprea and Adela Bâra
In this paper, we aim to provide an extensive analysis to understand how various factors influence electricity prices in competitive markets, focusing on the day-ahead electricity…
Abstract
Purpose
In this paper, we aim to provide an extensive analysis to understand how various factors influence electricity prices in competitive markets, focusing on the day-ahead electricity market in Romania.
Design/methodology/approach
Our study period began in January 2019, before the COVID-19 pandemic, and continued for several months after the onset of the war in Ukraine. During this time, we also consider other challenges like reduced market competitiveness, droughts and water scarcity. Our initial dataset comprises diverse variables: prices of essential energy sources (like gas and oil), Danube River water levels (indicating hydrological conditions), economic indicators (such as inflation and interest rates), total energy consumption and production in Romania and a breakdown of energy generation by source (coal, gas, hydro, oil, nuclear and renewable energy sources) from various data sources. Additionally, we included carbon certificate prices and data on electricity import, export and other related variables. This dataset was collected via application programming interface (API) and web scraping, and then synchronized by date and hour.
Findings
We discover that the competitiveness significantly affected electricity prices in Romania. Furthermore, our study of electricity price trends and their determinants revealed indicators of economic health in 2019 and 2020. However, from 2021 onwards, signs of a potential economic crisis began to emerge, characterized by changes in the normal relationships between prices and quantities, among other factors. Thus, our analysis suggests that electricity prices could serve as a predictive index for economic crises. Overall, the Granger causality findings from 2019 to 2022 offer valuable insights into the factors driving energy market dynamics in Romania, highlighting the importance of economic policies, fuel costs and environmental regulations in shaping these dynamics.
Originality/value
We combine principal component analysis (PCA) to reduce the dataset’s dimensionality. Following this, we use continuous wavelet transform (CWT) to explore frequency-domain relationships between electricity price and quantity in the day-ahead market (DAM) and the components derived from PCA. Our research also delves into the competitiveness level in the DAM from January 2019 to August 2022, analyzing the Herfindahl-Hirschman index (HHI).
Details
Keywords
Hossa F. Al-Shareef, Ahmed M. Yousif, Rafaat Eleisawy, Ammar M. Mahmoud and Hamada Abdelwahab
This paper aims to prepare alkyd protective paint by using modified alkyd with 3,6-dichloro benzo[b]thiophene-2-carbonyl glutamic acid (DCBTGA) as a source of dicarboxylic acid…
Abstract
Purpose
This paper aims to prepare alkyd protective paint by using modified alkyd with 3,6-dichloro benzo[b]thiophene-2-carbonyl glutamic acid (DCBTGA) as a source of dicarboxylic acid and evaluating their anticorrosive properties compared with those of unmodified alkyd coatings for steel protection.
Design/methodology/approach
Short, medium and long oil alkyds, which represented as (0, 10, 20 and 30% excess-OH) according to the resin constants (Patton, 1962), were prepared through a condensation polymerization reaction via a solvent process in a one-step reaction. The modification of alkyd was carried out by using DCBTGA as a source of dicarboxylic acid. The prepared modified alkyd was confirmed by IR and NMR spectral analysis. The physicochemical, mechanical and anticorrosion performance properties of the considered modified coating formulations against unmodified blank coating were studied to confirm their application efficiency.
Findings
The best results in terms of physicochemical, mechanical and anticorrosion performance properties were found according to the following of this order activity: 30 replacements of the modifier (DCBTGA) for each hydroxyl continent were 30% Ex-OH > 20% Ex-OH > 10% Ex-OH > 0% Ex-OH, compared with that formulation containing unmodified alkyd, especially with increasing the modifier percent.
Originality/value
The prepared DCBTGA-modified resins can be used for different applications based on the type of alkyd and application.
Details
Keywords
The purpose of this paper, an experimental study, is to investigate the optimal machining parameters for turning of nickel-based superalloy Inconel 718 under eco-friendly…
Abstract
Purpose
The purpose of this paper, an experimental study, is to investigate the optimal machining parameters for turning of nickel-based superalloy Inconel 718 under eco-friendly nanofluid minimum quantity lubrication (NMQL) environment to minimize cutting tool flank wear (Vb) and machined surface roughness (Ra).
Design/methodology/approach
The central composite rotatable design approach under response surface methodology (RSM) is adopted to prepare a design of experiments plan for conducting turning experiments.
Findings
The optimum value of input turning parameters: cutting speed (A), feed rate (B) and depth of cut (C) is found as 79.88 m/min, 0.1 mm/rev and 0.2 mm, respectively, with optimal output response parameters: Vb = 138.633 µm and Ra = 0.462 µm at the desirability level of 0.766. Feed rate: B and cutting speed: A2 are the leading model variables affecting Vb, with a percentage contribution rate of 12.06% and 43.69%, respectively, while cutting speed: A and feed rate: B are the significant factors for Ra, having a percentage contribution of 38.25% and 18.03%, respectively. Results of validation experiments confirm that the error between RSM predicted and experimental observed values for Vb and Ra is 3.28% and 3.75%, respectively, which is less than 5%, thus validating that the formed RSM models have a high degree of conformity with the obtained experimental results.
Practical implications
The outcomes of this research can be used as a reference machining database for various metal cutting industries to establish eco-friendly NMQL practices during the turning of superalloy Inconel 718 to enhance cutting tool performance and machined surface integrity.
Originality/value
No study has been communicated till now on the turning of Inconel 718 under NMQL conditions using olive oil blended with multi-walled carbon nanotubes-based nanofluid.
Peer review
The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-10-2023-0317/
Details
Keywords
Fahad K. Alkhaldi and Mohamed Sayed Abou Elseoud
The current chapter proposes a theoretical framework to assess the sustainability of economic growth in the Gulf Cooperation Council (GCC) States. The authors integrate insights…
Abstract
The current chapter proposes a theoretical framework to assess the sustainability of economic growth in the Gulf Cooperation Council (GCC) States. The authors integrate insights from endogenous growth models and consider the unique socioeconomic characteristics of the GCC region to provide a comprehensive and tailored approach to understanding the determinants of economic growth and formulating effective policy measures to foster sustainable development and growth. This chapter highlights the environmental challenges faced by GCC; based on this, the authors suggested indicators to construct a theoretical framework (Economic Growth, Climatic Indicators, Energy Indicators, Social Indicators, and Economic Resources Indicators). The authors propose that policymakers and researchers in GCC States should take these factors into account when devising policies or conducting research aimed at fostering sustainable economic growth. Overall, this chapter presents significant insights for policymakers, researchers, and stakeholders involved in promoting the sustainable economic advancement of the GCC States.
Details