Search results

The symmetrical valve is usually used in the hydraulic servo control system to control the asymmetrical cylinder, but this system’s structure involves asymmetry, and so its dynamic characteristics are asymmetrical, which causes issues in the control system of symmetric response. The purpose of this paper is to achieve the aim of symmetric control.

In this paper, the authors proposed a method that combined wavelet neural network (WNN) and model reference adaptive control. The reference model determined the dynamic response that the system was expected to achieve, and the WNN adaptive control made the system follow the reference model to achieve the purpose of symmetric control.

The experimental results show that the method can achieve a more accurate symmetric control and position control compared with the solutions via the classical PID control.

The proposed combination of the WNN and the reference model can effectively compensate for the asymmetry of dynamic response of the asymmetric cylinder in forward and return directions, which can be extended to deal with other classes of applications.

This paper aims to propose a novel system design and control algorithm of lower limb exoskeleton, which provides walking assistance and load sharing for the wearer.

In this paper, the valve-controlled asymmetrical hydraulic cylinder is selected for driving the hip and knee joint of exoskeleton. Pressure shoe is developed that purpose on detecting changes in plantar force, and a fuzzy recognition algorithm using plantar pressure is proposed. Dynamic model of the exoskeleton is established, and the sliding mode control is developed to implement the position tracking of exoskeleton. A series of prototype experiments including benchtop test, full assistance, partial assistance and loaded walking experiments are set up to verify the tracking performance and power-assisted effect of the proposed exoskeleton.

The control performance of PID control and sliding mode control are compared. The experimental data shows the tracking trajectories and tracking errors of sliding mode control and demonstrate its good robustness to nonlinearities. sEMG of the gastrocnemius muscle tends to be significantly weakened during assisted walking.

In this paper, a structure that the knee joint and hip joint driven by the valve-controlled asymmetrical cylinder is used to provide walking assistance for the wearer. The sliding mode control is proposed to deal with the nonlinearities during joint rotation and fluids. It shows great robustness and frequency adaptability through experiments under different motion frequencies and assistance modes. The design and control method of exoskeleton is a good attempt, which takes positive impacts on the productivity or quality of the life of wearers.

One of the challenges encountered in the design of guided projectiles is their prohibitive cost. To diminish it, an appropriate avenue many researchers have explored is the use of the non-actuator method for guiding the projectile to the target. In this method, biologically inspired by the flying concept of the single-winged seed, for instance, that of maple and ash trees, the projectile undergoes a helical motion to scan the region and meet the target in the descent phase. Indeed, the projectile is a decelerator device based on the autorotation flight while it attempts to resemble the seed’s motion using two wings of different spans. There exists a wealth of studies on the stability of the decelerators (e.g. the mono-wing, samara and pararotor), but all of them have assumed the body (exclusive of the wing) to be symmetric and paid no particular attention to the scanning quality of the region. In practice, however, the non-actuator-guided projectiles are asymmetric owing to the presence of detection sensors. This paper aims to present an analytical solution for stability analysis of asymmetric decelerators and apprise the effects of design parameters to improve the scanning quality.

The approach of this study is to develop a theoretical model consisting of Euler equations and apply a set of non-dimensionalized equations to reduce the number of involved parameters. The obtained governing equations are readily applicable to other decelerator devices, such as the mono-wing, samara and pararotor.

The results show that the stability of the body can be preserved under certain conditions. Moreover, pertinent conclusions are outlined on the sensitivity of flight behavior to the variation of design parameters.

The analytical solution and sensitivity analysis presented here can efficiently reduce the design cost of the asymmetric decelerator.

The main advantage of the proposed method is that the computations can be performed on a Cartesian grid with complex immersed boundaries (IBs). The purpose of this paper is to device a numerical scheme based on an embedding finite element method for the solution of two-dimensional (2D) Navier-Stokes equations.

Geometries featuring the stationary solid obstacles in the flow are embedded in the Cartesian grid with special discretizations near the embedded boundary to ensure the accuracy of the solution in the cut cells. To comprehend the complexities of the viscous flows with IBs, the paper adopts a compact interpolation scheme near the IBs that allows to satisfy the second-order accuracy and the conservation property of the solver. The interpolation scheme is designed by virtue of the shape function in the finite element scheme.

Three numerical examples are selected to demonstrate the accuracy and flexibility of the proposed methodology. Simulation of flow past a circular cylinder for a range of Re=20-200 shows excellent agreements with other results using different numerical schemes. Flows around a pair of tandem cylinders and several bodies are particularly investigated. The paper simulates the time-based variation of the flow phenomena for uniform flow past a pair of cylinders with various streamwise gaps between two cylinders. The results in terms of drag coefficient and Strouhal number show excellent agreements with the results available in the literature.

Details of the flow characteristics, such as velocity distribution, pressure and vorticity fields are presented. It is concluded the combined embedding boundary method and FE discretizations are robust and accurate for solving 2D fluid flows with complex IBs.

This study aims at investigating two-dimensional laminar flow of power-law fluids around three unconfined side-by-side cylinders.

The numerical study is performed by solving the governing (continuity and momentum) equations using a finite volume-based code ANSYS Fluent. The numerical results have been presented for different combinations of the governing dimensionless parameters (dimensionless spacing, 1.2 = L = 4; Reynolds number, 0.1 = Re = 100; power-law index, 0.2 = n = 1.8). The dependence of the kinematic and macroscopic characteristics of the flow such as streamline patterns, distribution of the surface pressure coefficient, total drag coefficient with its components (pressure and friction) and total lift coefficient on these dimensionless parameters has been discussed in detail.

It is found that the separation of the flow and the apparition of the wake region accelerate as the dimensionless spacing decreases, the number of the cylinder increases and/or the fluid behavior moves from shear-thinning to Newtonian then to shear-thickening behavior. In addition, the distribution of the pressure coefficient on the surface of the cylinders presents a complex dependence on the fluid behavior index and Reynolds number when the dimensionless spacing between two adjacent cylinders is varied. At low Reynolds numbers, the drag coefficient of shear-thinning fluids is stronger than that of Newtonian fluids; this tendency decreases progressively with increasing of Re until a critical value; beyond the critical Re, the opposite trend is observed. The lift coefficient of the middle cylinder is null, whereas, the exterior cylinders experience opposite lift coefficients, which show a complex dependence on the dimensionless spacing, the Reynolds number and the power-law index.

The flow over bluff bodies is a practical engineering problem. In the literature, it can be seen that the previous studies on non-Newtonian fluids are limited to the flow over one or two cylinders (effect of an odd number of cylinders on each other). Besides that, the available results concerning the flow of Newtonian fluids over three cylinders are limited to the high Reynolds numbers region only. However, this work treats the flow of non-Newtonian power-law fluids past three circular cylinders in side-by-side arrangements under a wide range of Re. The outcome of the present study demonstrates that the augmentation of the geometry complexity to three cylinders (effect of pair surrounding cylinders on the surrounded ones in what concerns Von Karman Street phenomenon) causes a drastic change in the flow patterns and in the macroscopic characteristics. The present results may be used to predict the flow behavior around multiple side-by-side cylinders.

To control one of the joints during the actual movement of the hydraulically driven quadruped robot, all the other joints in the leg need to be locked. Once the joints are unlocked, there is a coupling effect among the joints. Therefore, during the normal exercise of the robot, the movement of each joint is affected by the coupling of other joints. This brings great difficulties to the coordinated motion control of the multi-joints of the robot. Therefore, it is necessary to reduce the influence of the coupling of the hydraulically driven quadruped robot.

To solve the coupling problem with the joints of the hydraulic quadruped robot, based on the principle of mechanism dynamics and hydraulic control, the dynamic mathematical model of the single leg mechanism of the hydraulic quadruped robot is established. On this basis, the coupling dynamics model of the two joints of the thigh and the calf is derived. On the basis of the multivariable decoupling theory, a neural network (NN) model reference decoupling controller is designed.

The simulation and prototype experiment are carried out between the thigh joint and the calf joint of the hydraulic quadruped robot, and the results show that the proposed NN model reference decoupling control method is effective, and this method can reduce the cross-coupling between the thigh and the calf and improve the dynamic characteristics of the single joint of the leg.

The proposed method provides technical support for the mechanical–hydraulic cross-coupling among the joints of the hydraulic quadruped robot, achieving coordinated movement of multiple joints of the robot and promoting the performance and automation level of the hydraulic quadruped robot.

On the basis of the theory of multivariable decoupling, a new decoupling control method is proposed, in which the mechanical–hydraulic coupling is taken as the coupling behavior of the hydraulic foot robot. The method reduces the influence of coupling of system, improves the control precision, realizes the coordinated movement among multiple joints and promotes the popularization and use of the hydraulically driven quadruped robot.

The purpose of the paper is to predict the aerodynamic performance of a complete scale model H-Darrieus vertical axis wind turbine (VAWT) with end plates at different operating conditions. This paper aims at understanding the flow physics around a model VAWT for three different tip speed ratios corresponding to three different flow regimes.

This study achieves a first three-dimensional hybrid lattice Boltzmann method/very large eddy simulation (LBM-VLES) model for a complete scaled model VAWT with end plates and mast using the solver PowerFLOW. The power curve predicted from the numerical simulations is compared with the experimental data collected at Erlangen University. This study highlights the complexity of the turbulent flow features that are seen at three different operational regimes of the turbine using instantaneous flow structures, mean velocity, pressure iso-contours, blade loading and skin friction plots.

The power curve predicted using the LBM-VLES approach and setup provides a good overall match with the experimental power curve, with the peak and drop after the operational point being captured. Variable turbulent flow structures are seen over the azimuthal revolution that depends on the tip speed ratio (TSR). Significant dynamic stall structures are seen in the upwind phase and at the end of the downwind phase of rotation in the deep stall regime. Strong blade wake interactions and turbulent flow structures are seen inside the rotor at higher TSRs.

The computational cost and time for such high-fidelity simulations using the LBM-VLES remains expensive. Each simulation requires around a week using supercomputing facilities. Further studies need to be performed to improve analytical VAWT models using inputs/calibration from high fidelity simulation databases. As a future work, the impact of turbulent and nonuniform inflow conditions that are more representative of a typical urban environment also needs to be investigated.

The LBM methodology is shown to be a reliable approach for VAWT power prediction. Dynamic stall and blade wake interactions reduce the aerodynamic performance of a VAWT. An ideal operation close to the peak of the power curve should be favored based on the local wind resource, as this point exhibits a smoother variation of forces improving operational performance. The 3D flow features also exhibit a significant wake asymmetry that could impact the optimal layout of VAWT clusters to increase their power density. The present work also highlights the importance of 3D simulations of the complete model including the support structures such as end plates and mast.

Accurate predictions of power performance for Darrieus VAWTs could help in better siting of wind turbines thus improving return of investment and reducing levelized cost of energy. It could promote the development of onsite electricity generation, especially for industrial sites/urban areas and renew interest for VAWT wind farms.

A first high-fidelity simulation of a complete VAWT with end plates and supporting structures has been performed using the LBM approach and compared with experimental data. The 3D flow physics has been analyzed at different operating regimes of the turbine. These physical insights and prediction capabilities of this approach could be useful for commercial VAWT manufacturers.

Legged robots are inevitably to interact with the environment while they are moving. This paper aims to properly handle these interactions. It works to actively control the joint torques of a hydraulic-actuated leg prototype and achieve compliant motion of the leg.

This work focuses on the modelling and controlling of a hydraulic-actuated robot leg prototype. First, the design and kinematics of the leg prototype is introduced. Then the linearlized model for the hydraulic actuator is built, and a model-based leg joint torque controller is presented. Furthermore, the virtual model controller is implemented on the prototype leg to achieve active compliance of the leg. Effectiveness of the controllers are validated through the experiments on the physical platform as well as the results from simulations.

The hydraulic joint torque controller presented in this paper shows good torque tracking performance. And the actively compliant leg successfully emulates the performance of virtual passive components under dynamic situations.

The main contribution of this paper is that it proposed a model-based active compliance controller for the hydraulic-actuated robot leg. It will be helpful for those robots that aim to achieve versatile and safe motions.

The purpose of this paper is to investigate an intelligent control for water hydraulic position servo system which is intent to be used in remote control robot for fusion reactor. The dynamic model of water hydraulic servo control system is built and proportional–integral–derivative (PID) controller is used.

PID control is the most common control algorithm used in industry and has been a conventional tool used to operate closed-loop control system; however, it is very difficult to achieve high accuracy and fast response by using the traditional way to tune its perimeters. To improve the control performance, optimization algorithm can be applied to search the best parameters of PID. This paper presents a search algorithm using particle swarm with H₂ control standards objective function to optimize PID parameters.

By comparing simulation and mock-up experiments’ results from different control methods, the particle swarm optimization algorithm presents better performance and is more effective for tuning PID parameters.

This paper presents an effective way to ensure safety and efficiency for remote handling maintenances of China Fusion Engineering Test Reactor.

Sinusoidal signals are often used as the inputs of the six degree of freedom (DOF) motion simulator platforms. The purpose of this paper is to propose a fuzzy incremental controller (FIC) to improve sinusoidal signal tracking performances of an electrohydraulic Gough-Stewart platform (GSP).

An FIC is proposed to control an electrohydraulic GSP without any model parameters. The FIC output can be self-organized by only using the hydraulic actuator position information. The control rules are determined by a systematic deterministic method.

Experimental results show that the proposed FIC is valid and can achieve better tracking performances compared with classical PID controller and a decoupling controller (a model-based controller).

An FIC using a systematic deterministic rule-base determination method is proposed to improve sinusoidal signal tracking performances of electrohydraulic GSP.