Search results

To provide a general review of the flight flutter test techniques utilized in aeroelastic stability flight testing of aircraft, and to highlight the key items involved in flight flutter testing of aircraft, by emphasizing all the main information processed during the flutter stability verification based on flight test data.

Flight flutter test requirements are first reviewed by referencing the relevant civil and military specifications. Excitation systems utilized in flight flutter testing are overviewed by stating the relative advantages and disadvantages of each technique. Flight test procedures followed in a typical flutter flight testing is described for different air speed regimes. Modal estimation methods, both in frequency and time domain, used in flutter prediction are surveyed. Most common flight flutter prediction methods are reviewed. Finally, key considerations for successful flight flutter testing are noted by referencing the related literature.

Online, real time monitoring of flutter stability during flight testing is very crucial, if the flutter character is not known a priori. Techniques such as modal filtering can be used to uncouple response measurements to produce simplified single degree of freedom responses, which could then be analyzed with less sophisticated algorithms that are more able to run in real time. Frequency domain subspace identification methods combined with time‐frequency multiscale wavelet techniques are considered as the most promising modal estimation algorithms to be used in flight flutter testing.

This study gives concise but relevant information on the flight flutter stability verification of aircraft to the practicing engineer. The three important steps used in flight flutter testing; structural excitation, structural response measurement and stability prediction are introduced by presenting different techniques for each of the three important steps. Emphasis has been given to the practical advantages and disadvantages of each technique.

This paper offers a brief practical guide to all key items involved in flight flutter stability verification of aircraft.

As part of the V.10 F programme financed by Service Technique de la Production Aeronautique (STPA), AEROSPATIALE and DASSAULT — BREGUET have joined forces to produce a single Falcon 10 wing entirely made of carbon fibre. This wing has just been sent from the AEROSPATIALE Company's Nantes factory to the Toulouse Aernautic Testing Centre. A second wing will also be built, but this time, by DASSAULT‐BREGUET Biarritz plant. The two wings will be used for static fatigue testing. The programme calls for another pair of wings, one to be made by each of the same firms. They will later be mounted to a Falcon 10 for flight testing.

This article outlines the procedures being used at Westland Helicopters Limited to establish the fatigue lives of the dynamic and structural components of the Lynx and to demonstrate how an adequate safety level is achieved under the loading sustained by the aircraft. For the newcomer to the fatigue problem a brief introduction to the phenomenon of fatigue will be provided and it will be shown how it is applicable to a helicopter. A philosophical outline of the fatigue procedures in current use at Westlands follows and then a description of the Lynx is given. The article will then describe the fatigue testing, flight testing and substantiation procedures used with the Lynx and it will be shown how the eventual fatigue lives are estimated. Finally some thoughts are put forward about the future of fatigue substantiation.

This paper aims to provide a detailed review of the experimental research on the prediction of aircraft spin and recovery characteristics using dynamically scaled aircraft models.

The paper organizes experimental techniques to predict aircraft spin and recovery characteristics into three broad categories: dynamic free-flight tests, dynamic force tests and a relatively novel technique called wind tunnel based virtual flight testing.

After a thorough review, usefulness, limitations and open problems in the presented techniques are highlighted to provide a useful reference to researchers. The area of application of each technique within the research scope of aircraft spin is also presented.

Previous reviews on the prediction of aircraft spin and recovery characteristics were published many years ago and also have confined scope as they address particular spin technologies. This paper attempts to provide a comprehensive review on the subject and fill the information void regarding the state of the art aircraft spin technologies.

The purpose of this paper is a development of a virtual flight test framework with derivative design optimization. Aircraft manufactures and engineers have been putting significant effort into the design process to lower the cost of development and time to a minimum. In terms of flight tests and aircraft certification, implementing simulation and virtual test techniques may be a sufficient method in achieving these goals. In addition to simulation and virtual test, a derivative design can be implemented to satisfy different market demands and technical changes while reducing development cost and time.

In this paper, a derivative design optimization was applied to Expedition 350, a small piston engine powered aircraft developed by Found Aircraft in Canada. A derivative that changes the manned aircraft to an Unmanned Aerial Vehicle for payload delivery was considered. An optimum configuration was obtained while enhancing the endurance of the UAV. The multidisciplinary design optimization module of the framework represents the optimized configuration and additional parameters for the simulator. These values were implemented in the simulator and generated the aircraft model for simulation. Two aircraft models were generated for the flight test.

The optimization process delivered the UAV derivative of Expedition E350, and it had increased endurance up to 21.7 hours. The original and optimized models were implemented into virtual flight test. The cruise performance exhibited less than 10 per cent error on cruise performance between the original model and Pilots Operating Handbook (POH). The dynamic stability of original and optimized models was tested by checking Phugoid, short period, Dutch roll and spiral roll modes. Both models exhibited stable dynamic stability characteristics.

The original Expedition 350 was generated to verify the accuracy of the simulation data by comparing its result with actual flight test data. The optimized model was generated to evaluate the optimization results. Ultimately, the virtual flight test framework with an aircraft derivative design was proposed in this research. The additional module for derivative design optimization was developed and its results were implemented to commercial off-the-shelf simulators.

This paper proposed the application of UAV derivative design optimization for the virtual flight test framework. The methodology included the optimization of UAV derivative utilizing MDO and virtual flight testing of an optimized result with a flight simulator.

The purpose of this paper is to present an approach to a polar graph measurement by a flight testing technique and to propose a baseline research method for future tests of UAV polar graphs. The method presented can be used to demonstrate a conceptual and preliminary design process using a scaled, unmanned configuration. This shows how results of experimental flight tests using a scaled flying airframe may be described and analysed before manufacturing the full scale aircraft.

During the research, the flight tests were conducted for two aerodynamic configurations of a small UAV. This allowed the investigation of the influence of winglets and classic vertical stabilizers on the platform stability, performance and therefore polar graphs of a small unmanned aircraft.

A methodology of flight tests for the assessment of a small UAV’s polar graph has been proposed, performed and assessed. Two aerodynamic configurations were tested, and it was found that directional stability had a large influence on the UAV’s performance. A correlation between the speed and inclination of the altitude graph was found – i.e. the higher the flight speed, the steeper the altitude graph (higher descent speed, steeper flight path angle). This could be considered as a basic verification that the recorded data have a physical sense.

The polar graph and therefore glide ratio of the aircraft is a major factor for determining its performance and power required for flight. Using the right flight test procedure can speed-up the process of measuring glide ratio, making it easier, faster, robust, more effective and accurate in future research of novel, especially unorthodox configurations. This paper also can be useful for the proper selection of requirements and preliminary design parameters for making the design process more economically effective.

This paper presents a very efficient method of assessing the design parameters of UAVs, especially the polar graph, in an early stage of the design process. Aircraft designers and producers have been widely performing flight testing for years. However, these procedures and practical customs are usually not wide spread and very often are treated as the company’s “know how”. Results presented in this paper are original, relatively easily be repeated and checked. They may be used either by professionals, highly motivated individuals and representatives of small companies or also by ambitious amateurs.

High-altitude ice crystals (HAICs) are causing one in-flight event or more per month for commercial aircraft. The effects include preventing air data probes (pitot pressure and total air temperature in particular) from functioning correctly and causing engines to roll back and shut down. The purpose of this study is to describe the process used by the National Research Council Canada (NRC) to develop and test a particle detection probe (PDP). The probe mounts on the fuselage of aircraft to sense and quantify the ice crystals in the environment.

The probe was demonstrated on the NRC Convair and Airbus A340 research aircraft as part of the European Union HAIC programme. The probe was ruggedised, adapted for easy installation in standard aircraft fittings and tested in a variety of conditions for longevity and endurance.

Efforts to achieve the safety requirements for flight on aircraft are discussed. The challenges, surprises and opportunities for testing on which the development group is capitalised are also presented.

It was demonstrated that the detectors gave signals proportional to the ice crystal content of clouds, and results demonstrating the functionality of the probe are presented.

This paper describes the multi-year process of developing the NRC PDP from a test cell sensor for detecting engine exhaust contaminants on an aircraft ice crystal detection probe. The work included over 20 flight tests on NRC aircraft and the Airbus HAIC test programme.

The experience gained since 1959 at MBB, Military Aircraft Division, in the development and flight testing of V/STOL combat aircraft having the capability to reach Mach 2 and to take off with after‐burning temperatures is described. The German project VJ 101 C and the US/FRG project AVS as well as the joint US/FRG V/STOL Technology Programme conducted during the years 1967 through 1970 serve as examples. The paper consists of two main sections:

This paper aims to present assessment of models and simulation results used in the development process of flight stabilisation system that uses trim tabs for PZL-130 Orlik turboprop military trainer aircraft. Flight test of the system allowed to compare software and hardware simulation results with real flight recordings.

Proposed flight stabilisation system was developed using modern techniques of model-based design, automatic code generation, software and hardware in the loop testing. The project reached flight testing stage which allowed to gather data to verify models and simulation results and asses their quality.

Results of the comparison showed that the trim tab actuator model used in simulation can be improved by adding play. This reduced the difference between simulation and real flight system output – actuator angle. The influence of airloads on the flying actuator angle compared to hardware in the loop simulation in lab is less than ± 0.6°.

Proposed flight stabilisation system that uses trim tabs has several benefits over classic automatic flight system in terms of weight, energy consumption and structure simplicity and does not need aircraft primary control modification. It was developed using modern techniques of model-based design, automatic code generation and hardware in the loop simulations.

The purpose of this paper is to explore various in-flight crew escape options of a prototype transport aircraft and finalize the option offering safest crew egress for different combinations of contingencies and flight conditions.

Various egress options were explored through simulation in a computational fluid dynamics (CFD) software using aircraft 3D CAD model and scalable digital mannequins. For this, certain important contingencies which best describe the extreme aircraft behaviour were identified. Crew escape options, which have least external interference in expected egress trajectory, were selected. Several test simulations representing each feasible combination of contingency, escape option and flight condition were simulated. The option which offers safe crew escape in each test case is deemed to be the safest egress option for the test aircraft.

Among five options explored, crew escape through forward ventral hatch provided the safest crew escape for all test cases. The selected option was validated for robustness with additional test cases modelling different anthropometric characteristics of 5th and 50th percentile pilot populations with different postures.

In-flight validation of safe crew escape option is infeasible by actual trial. Exploration of safe crew options for required number of test cases by any analytical method or by wind tunnels tests is tedious, time consuming and extremely expensive. On the other hand, exploration of safest crew option by CFD, besides being first of its kind, provides convenient option to configure, test and validate different test cases with unmatched benefits in time, cost and simplicity.