Search results

The purpose of this paper is to synthesise a tetrakisazo reactive dye and to characterise its dyeing property to meet the demand for better black reactive dyes.

The novel tetrakisazo navy-blue reactive dye based on 4,4′-diaminostilbene-2,2′-disulphonic acid was designed and synthesized. The dyeing behaviour of it on cotton fabric was discussed. The synergistic blackening effect and absorbance spectra were investigated by absorbance and reflectance spectra, K/S and colorimetric data.

The exhaustion and fixation of the designed reactive dye were higher than 20 per cent than those of the commercial reactive dye, CI Reactive Black 5. The novel reactive dye has complementary with Reactive Red SPB and Reactive Yellow C-5R in absorbance spectra from 360 to 700 nm. Three reactive dyes had synergistic effect in colour deepening properties. The dyed cotton fabric possessed high K/S value and low reflectance in the whole visual spectrum range from 360 to 700 nm.

Comparison with the commercial Reactive Black DN-RN, the blackness of the dyed fabrics with the mixture dyes was greatly improved and the fastness properties on cotton fabrics were also good.

The paper is an original research work. Because the mixture dyes had better blackness and good fastness properties, it would have wide application in the dyeing of cotton fabric.

The purpose of this paper is to describe the trends in residential solid waste collection (RSWC) services in rural China over the past decade and analyze the determinants of these services using nationally representative data.

The authors draw on panel data from three rounds of village-level surveys of 101 villages. The three surveys were conducted in 2005, 2008, and 2012 in five provinces. The authors used fixed-effected regression approach to analyze the determinants of these services.

The results show that in the aftermath of increased investment and policy attention at the national level, the proportion of villages providing RSWC services in rural China increased significantly from 1998 to 2011. However, half of all villages in rural China still did not provide RSWC services as of 2011. Based on econometrics analysis, the authors show that villages that are richer, more populous, and villages with more small hamlets are more likely to provide RSWC services.

The analyses are based on primary survey data and the first to quantify trends in waste management services in the beginning of the twentieth century. The authors believe that the results will have significant policy implications for China in its continuing quest for better waste management policy.

The purpose of this paper is to synthesise a disperse dye based on benzisothiazole and to characterise its crystal morphology, dispersing stability, to study the relationship between the chemical structure and the dyeing property of the dye.

The disperse dye based on benzisothiazole, 3-(3-methyl-4-N-ethyl-N-benzyl-phenyldiazenyl)-5-nitro-2,1-benzisothiazoles, was synthesized. The disperse dye based on benzisothiazole, 3-(3-methyl-4-N-ethyl-N-benzyl-phenyldiazenyl)-5-nitro-2,1-benzisothiazoles, was synthesised. The chemical structure of the dye obtained was characterised by infrared spectrum Fourier transform infrared spectroscopy and nuclear magnetic resonance (1HNMR), and the crystal morphology was observed by Field Emission Scanning Electron Microscopy. Sodium salt of polycondensated naphthalenesulphonic acid (dispersing agent sodium salt of polycondensated naphthalenesulphonic acid [MF]) and a sulphonated amino polyether (anionic surfactant B600) were employed to grind and disperse the dye crystals. The dispersion property of the dye particles was characterised. Dyeing property of the dispersion system was also studied.

The dye formed spherical crystals that were made up of a large number of acicular crystals similar to spherical chrysanthemum. The crystals had warping crystal centres inside the spheres. The particle sizes of the dispersion with the mixture of B600 and MF had an uniform distribution and were smaller than that of the dispersion with only single dispersing agent MF. Dyeing with the dispersion system had an excellent reproducibility under alkalinic condition.

An alkalinic dyeing method for poly(ethylene terephthalate) (PET) with disperse dyes as a cleaner wet process had been developed. Such a process combined pretreatment and dyeing process using the alkali-stable disperse dyes and reduced the consumption of water and energy and improved production efficiency.

The crystal morphology, dispersion and dyeing properties of the synthesised disperse dye for dyeing PET fabric under alkalinic condition were discussed. This disperse dye has an important potential application in alkalinic dyeing method.

The purpose of this study is to examine the fretting wear property of ultra-high molecular weight polyethylene (UHMWPE)-based composites reinforced by different content of attapulgite.

A series of composites were prepared by a hot-pressing method. Fretting tests were carried out using an SRV-IV oscillating reciprocating friction wear tester with a load of 10 N and a frequency of 100 Hz. The morphology of the fracture structure and the worn surface was observed by field-emission scanning electron microscopy, X-ray diffraction and a non-contact three dimensional surface profiler.

With the addition of attapulgite, the microstructure of the composites become more regular, and their heat resistance improved. Furthermore, the friction coefficient and the specific wear rate of the composites with lower filler content reduced compared with that of neat UHMWPE, and the optimum filler content is 1 per cent.

The study investigated the fretting resistance mechanism of the attapulgite in the UHMWPE matrix. The results could help to provide some experimental evidence for the broader application of silicates on the fretting wear resistance of polymers.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-10-2019-0420/