Search results

Binder jetting is one of the essential additive manufacturing methods because it is cost-effective, has no thermal stress problems and has a wide range of different materials. Using binder jetting technology in the industry is becoming more common recently. However, it has disadvantages compared to traditional manufacturing methods regarding speed. This study aims to increase the manufacturing speed of binder jetting.

This study used adaptive slicing to increase the manufacturing speed of binder jetting. In addition, a variable binder amount algorithm has been developed to use adaptive slicing efficiently. Quarter-spherical shaped samples were manufactured using a variable binder amount algorithm and adaptive slicing method.

Samples were sintered at 1250°C for 2 h with 10°C/min heating and cooling ramp. Scanning electron microscope analysis, surface roughness tests, and density calculations were done. According to the results obtained from the analyzes, similar surface quality is achieved by using 38% fewer layers than uniform slicing.

More work is needed to implement adaptive slicing to binder jetting. Because the software of commercial printers is very difficult to modify, an open-source printer was used. For this reason, it can be challenging to produce perfect samples. However, a good start has been made in this area.

To the best of the authors’ knowledge, the actual use of adaptive slicing in binder jetting was applied for the first time in this study. A variable binder amount algorithm has been developed to implement adaptive slicing in binder jetting.

This paper aims to develop a new slicing method for fused deposition modelling (FDM), the curved layer adaptive slicing (CLAS), combining adaptive flat layer and curved layer slicing together.

This research begins with a review of current curved layer and adaptive slicing algorithms employed in the FDM and further improvement of the same, where possible. The two approaches are then integrated to develop the adaptive curved layer slicing based on the three-plane intersection method for curved layer offsetting and consideration of facet angles together with the residual heights for adaptive slicing. A practical implementation showed that curved layer adaptive layers respond in similar lines to the flat layer counterparts in terms of the mechanical behaviour of FDM parts.

CLAS is effective in capturing sharply varying surface profiles and other finer part details, apart from imparting fibre continuity. Three-point bending tests on light curved parts made of curved layers of varying thicknesses prove thicker curved layers to result in better mechanical properties.

The algorithms developed in this research can handle relatively simple shapes to develop adaptive curved slices, but further developments are necessary for more complex shapes. The test facilities also need further improvements, to be able to programmatically implement adaptive curved layer slicing over a wide range of thicknesses.

When fully developed and implemented, CLAS will allow for better FDM part construction with lesser build times.

This research fills a gap in terms of integrating both curved layer and adaptive slicing techniques to better slice and build a part of given geometry using FDM.

The main aim of this study is to generate curved-form cut on the edge of an adaptive layer. The resulting surface would have much less geometry deviation error and closely fit its computer aided design (CAD) model boundary.

This method is inspired by the manual peeling of an apple in which a knife's orientation and movement are continuously changed and adjusted to cut each slice with minimum waste. In this method, topology and geometry information are extracted from the previously generated adaptive layers. Then, the thickness of an adaptive layer and the bottom and top contours of the adjacent layers are fed into the proposed algorithm in the form of the contour and normal vector to create curved-form sloping surfaces. Following curved-form adaptive slicing, a customized machine path compatible with a five-axis abrasive waterjet (AWJ) machine will be generated for any user-defined sheet thicknesses.

The implemented system yields curved-form adaptive slices for a variety of models with diverse types of surfaces (e.g. flat, convex, and concave), different slicing direction, and different number of sheets with different thicknesses. The decrease in layer thickness and increase of the number of the sloped cuts can make the prototype as close as needed to the CAD model.

The algorithm is designed for use with five-axis AWJ cutting of any kind of geometrical complex surfaces. Future research would deal with the nesting problem of the layers being spread on the predefined sheet as the input to the five-axis AWJ cutter machine to minimize the cutting waste.

The algorithm generates adaptive layers with concave or convex curved-form surfaces that conform closely to the surface of original CAD model. This will pave the way for the accurate fabrication of metallic functional parts and tooling that are made by the attachment of one layer to another. Validation of the output has been tested only as the simulation model. The next step is the customization of the output for the physical tests on a variety of five-axis machines.

This paper proposes a new close to CAD design sloped-edge adaptive slicing algorithm applicable to a variety of five-axis processes that allow variable thickness layering and slicing in different orientations (e.g. AWJ, laser, or plasma cutting). Slices can later be bonded to build fully solid prototypes.

Compared with cusp height and area deviation ratio, volume error (VE) caused by the layer height could represent the stair-case effect more comprehensively. The proposed relative volume error (RVE)-based adaptive slicing method takes VE rather than cusp height as slicing criteria, which can improve part surface quality for functionalized additive manufacturing.

This paper proposes a volumetric adaptive slicing method of manifold mesh for rapid prototyping based on RVE. The pre-height sequences of manifold mesh are first preset to reduce the SE by dividing the whole layer sequence into several parts. A breadth-first search-based algorithm has been developed to generate a solid voxelization to get VE. A new parameter RVE is proposed to evaluate the VE caused by the sequence of the layer positions. The RVE slicing is conducted by iteratively adjusting the layer height sequences under different constraint conditions.

Three manifold models are used to verify the proposed method. Compared with uniform slicing with 0.2 mm layer height, cusp height-based method and area deviation-based method, the standard deviations of RVE of all three models are improved under the proposed method. The surface roughness measured by the confocal laser scanning microscope proves that the proposed RVE method can greatly improve part surface quality by minimizing RVE.

This paper proposes an RVE-based method to balance the surface quality and print time. RVE could be calculated by voxelized parts with required accuracy at a very fast speed by parallel.

This paper aims to propose a global adaptive direct slicing technique of Non-Uniform Rational B-Spline (NURBS)-based sculptured surface for rapid prototyping where the NURBS representation is directly extracted from the computer-aided design (CAD) model. The imported NURBS surface is directly sliced to avoid inaccuracies due to tessellation methods used in common practice. The major objective is to globally optimize texture error function based on the available range of layer thicknesses of the utilized rapid prototyping machine. The total texture error is computed with the defined error function to verify slicing efficiency of this global adaptive slicing algorithm and to find the optimum number of slices. A variety of experiments are conducted to study the accuracy of the developed procedure, and the results are compared with previously developed algorithms.

This paper proposes a new adaptive algorithm which globally optimizes a texture error function produced by staircase effect for a user-defined number of layers. The adaptive slicing algorithm dynamically calculates optimized slicing thicknesses based on the rapid prototyping machine’s specifications to minimize the texture error function. This paper also compares the results of implementing the developed methodology with the results of previously developed algorithms and presents cost-effective optimum slicing layer thicknesses.

A new methodology for global adaptive direct slicing algorithm of CAD models, based on a texture error function for the final product and the possible layer thicknesses in rapid prototyping, has been developed and implemented. Comparing the results of implementation with the common practice for several case studies shows that the proposed approach has greater slicing efficiency. Typically, by utilizing this approach, the number of prototyping layers can be reduced by 20-50 per cent compared to the slicing with other algorithms, while maintaining or improving the accuracy of the final manufactured surfaces. Therefore, the developed slicing method provides a better solution to trade-off between the rapid prototyping time and the rapid prototyping accuracy. For the many advantages of global direct slicing, it can be seen as the future solution to the slicing process in rapid prototyping systems.

This paper presents an innovative approach in direct global adaptive slicing of the additive manufacturing parts. The novel definition of an error function which comprehensively addresses the resulting manufactured surface quality of the entire product allows presenting an objective function to solve and to find the optimum selection of all the layer thicknesses during the slicing process.

This paper presents a new approach to adaptive slicing that significantly reduces fabrication times. The new approach first identifies the individual parts and features that comprise each layer in a given build, and then slices each independently of one another. This technique improves upon existing adaptive slicing algorithms by eliminating most of the slices that do not effectively enhance the overall part surface quality. Conventional adaptive slicing methods produce unnecessary layers that contribute to increased fabrication times without improving the overall quality of the part surfaces. These unnecessary layers result from fabricating all of the parts and features within the build volume at a given height using a single build layer thickness. Each thickness is commonly derived from the one part or feature existing at that height whose surface geometry requires the thinnest layer to meet a tolerance criterion. The new approach has been implemented on an FDM 1600 rapid prototyping system, and has demonstrated a 17‐37 per cent reduction in fabrication times compared to that of conventional adaptive slicing methods.

Adaptive slicing is a key step in three-dimensional (3D) printing as it is closely related to the building time and the surface quality. This study aims to develop a novel adaptive slicing method based on ameliorative area ratio and accurate cusp height for 3D printing using stereolithography (STL) models.

The proposed method consists of two stages. In the first stage, the STL model is sliced with constant layer thickness, where an improved algorithm for generating active triangular patches, the list is developed to preprocess the model faster. In the second stage, the model is first divided into several blocks according to the number of contours, then an axis-aligned bounding box-based contour matching algorithm and a polygons intersection algorithm are given to compare the geometric information between several successive layers, which will determine whether these layers can be merged to one.

Several benchmarks are applied to verify this new method. Developed method has also been compared with the uniform slicing method and two existing adaptive slicing methods to demonstrate its effectiveness in slicing.

Compared with other methods, the method leads to fewer layers whilst keeping the geometric error within a given threshold. It demonstrates that the proposed slicing method can reach a trade-off between the building time and the surface quality.

Layered manufacturing (LM) or rapid prototyping is a process in which a part is produced using layer‐by‐layer addition of the material. In LM, slicing of the CAD model of a part to be produced is one of the important steps. Slicing of CAD model with a very small slice thickness leads to large build time. At the same time if large slice thickness is chosen, the surface finish is very bad due to staircasing. These two contradicting issues namely reduction in build time and better surface quality have been a major concern in laminated manufacturing. This contradiction has led to the development of number of slicing procedures. The present paper reviews various slicing approaches developed for tessellated as well as actual CAD models.

Layered manufacturing with curved layers is a recently proposed rapid prototyping (RP) strategy for the manufacture of curved, thin and shell-type parts and the repair of worn surfaces, etc. The present investigation indicates another possible application area. In case of flat-layered RP of computer-aided design models having randomly located, small-dimensioned but critical surface features, adaptive slicing is resorted to. Large number of thin slices have to be employed to preserve the critical features. In contrast, a considerably lower number of curved thin slices would be required to preserve such surface features in case of RP with curved layers.

The method of preservation of critical features by RP with curved layers is formulated and demonstrated for two clusters of critical features on the surface of a part. A minimum number of such curved layers is identified by application of genetic algorithms (GAs) in case of a simple example. GA evolves the shape of the curved layer passing through the lower cluster so as to make a curved layer pass through the upper cluster of critical features.

In the example part, a 21 per cent reduction in the number of layers is achieved by the application of adaptive curved layers over adaptive straight layers.

The novelty of the concept is the proposed use of curved layered RP with adaptive slicing for the preservation of critical features in final prototyped part. This methodology, applied to part with two distinct clusters, leads to reduced number of layers compared to that obtained in flat-layered RP.

An adaptive slicing algorithm that can vary the layer thickness in relation to local geometry is presented. The algorithm is based on three fundamental concepts: choice of criterion for accommodating complexities of surfaces, recognition of key characteristics and features of the object, and development of a grouping methodology for facets used to represent the object. Four criteria, cusp height, maximum deviation, chord length and volumetric error per unit length, are identified and the layer thickness is adjusted such that one of the four is met. Next, key characteristics of the object, such as horizontal and vertical surfaces, pointed edges and ends, are identified based on the local changes in surface complexity, and slice based feature recognition is introduced to identify the nature of a feature, protrusion or depression, by studying the slice data. Note that the present approach uses information only from the tessellated model, and thus is different from current implementations. Finally, the concept of grouping of the facets based on their vertex coordinates is developed to minimize the number of searches for possible intersection of the facets with a slice plane. The slicing algorithm is interfaced with adaptive laminated machining and the stereolithography process through a CNC post processor and a hatching algorithm respectively. A comparison of the estimated surface quality and build time indicates that adaptive slicing produces superior parts in a shorter build time. The implementation of this work is protected under US Patent laws (Patent # 5,596,504, January 1997).