Search results

Mosques are built with dome-shaped ceilings for communal worship with common architectural styles worldwide for prayer. Since the acoustics of worship buildings are just as significant as their aesthetics, they should enhance people’s sense of hearing. This study evaluates the speech intelligibility of a small mosque with multiple domes to determine the space acoustic conditions.

The investigation involved extensive literature reviews to collect relevant data to model the case study. The Enhanced Acoustics Simulator for Engineers (EASE) software program was used to integrate critical parameters such as the absorption coefficient of materials, dome shapes and the number of domes in the simulation. The study employed speech intelligibility parameters such as C50, S.T.I. and %ALcons to assess the acoustic conditions. The assessment model was validated through statistical analysis and a paired t-test.

The study discovered that varying shapes of the multiple domes showed no significant impact on speech intelligibility. However, different multiple domes materials resulted in significant disparities in speech intelligibility. Applying high-absorption materials in multiple dome designs achieved the most effective acoustic performance. Except for C50 in some circumstances and receiver positions, all other alternatives met the optimal value for overall speech intelligibility because the sound was not sufficiently diffused early on, suggesting that the early reflection sounds were either weak or insufficient.

This study not only helps to determine the multiple-dome effect on mosque acoustics but also empowers archaeoacoustics and historic conservation by documenting these significant places of worship. The findings advocate using high-absorption materials in multiple dome designs and offer practical insight into mosque design material selection. By enhancing the understanding of the acoustic conditions in small-scale mosques, this study equips architects, engineers and builders with the knowledge to create spaces prioritizing speech clarity and intelligibility.

Based on the micro-electro-mechanical system (MEMS) technology, acoustic emission sensors have gained popularity owing to their small size, consistency, affordability and easy integration. This study aims to provide direction for the advancement of MEMS acoustic emission sensors and predict their future potential for structural health detection of microprecision instruments.

This paper summarizes the recent research progress of three MEMS acoustic emission sensors, compares their individual strengths and weaknesses, analyzes their research focus and predicts their development trend in the future.

Piezoresistive, piezoelectric and capacitive MEMS acoustic emission sensors are the three main streams of MEMS acoustic emission sensors, which have their own advantages and disadvantages. The existing research has not been applied in practice, and MEMS acoustic emission sensor still needs further research in the aspects of wide frequency/high sensitivity, good robustness and integration with complementary metal oxide semiconductor. MEMS acoustic emission sensor has great development potential.

In this paper, the existing research achievements of MEMS acoustic emission sensors are described systematically, and the further development direction of MEMS acoustic emission sensors in the future research field is pointed out. It provides an important reference value for the actual weak acoustic emission signal detection in narrow structures.

Identification of the direction of the sound source is very important for human–machine interfacing in the applications such as target detection on military applications and wildlife conservation. Considering its vast applications, this study aims to design, simulate, fabricate and test a bidirectional acoustic sensor having two cantilever structures coated with piezoresistive material for sensing has been designed, simulated, fabricated and tested.

The structure is a piezoresistive acoustic pressure sensor, which consists of two Kapton diaphragms with four piezoresistors arranged in Wheatstone bridge arrangement. The applied acoustic pressure causes diaphragm deflection and stress in diaphragm hinge, which is sensed by the piezoresistors positioned on the diaphragm. The piezoresistive material such as carbon or graphene is deposited at maximum stress area. Furthermore, the Wheatstone bridge arrangement has been formed to sense the change in resistance resulting into imbalanced bridge and two cantilever structures add directional properties to the acoustic sensor. The structure is designed, fabricated and tested and the dimensions of the structure are chosen to enable ease of fabrication without clean room facilities. This structure is tested with static and dynamic calibration for variation in resistance leading to bridge output voltage variation and directional properties.

This paper provides the experimental results that indicate sensor output variation in terms of a Wheatstone bridge output voltage from 0.45 V to 1.618 V for a variation in pressure from 0.59 mbar to 100 mbar. The device is also tested for directionality using vibration source and was found to respond as per the design.

The fabricated devices could not be tested for practical acoustic sources due to lack of facilities. They have been tested for a vibration source in place of acoustic source.

The piezoresistive bidirectional sensor can be used for detection of direction of the sound source.

In defense applications, it is important to detect the direction of the acoustic signal. This sensor is suited for such applications.

The present paper discusses a novel yet simple design of a cantilever beam-based bidirectional acoustic pressure sensor. This sensor fabrication does not require sophisticated cleanroom for fabrication and characterization facility for testing. The fabricated device has good repeatability and is able to detect the direction of the acoustic source in external environment.

This paper aims to study the design and characterization of a 3D printed tetrakaidecahedron cell-based acoustic metamaterial. At present, the mitigation of low-frequency noise involves the utilization of spatially demanding materials for the absorption of sound. These materials lack the ability for targeted frequency control adjustments. Hence, there is a requirement for an approach that can effectively manage low-frequency noise using lightweight and durable materials.

The CAD model was created in SolidWorks and was manufactured using the Digital Light Processing (DLP) 3D printing technique. Experimental study and numerical simulations examined the metamaterial’s acoustic absorption. An impedance tube with two microphones was used to determine the absorption coefficient of the metamaterial. The simulations were run in a thermoviscous module.

The testing of acoustic samples highlighted the effects of geometric parameters on acoustic performance. Increment of the strut length by 0.4 mm led to a shift in response to a lower frequency by 500 Hz. Peak absorption rose from 0.461 to 0.690 as the strut diameter was increased from 0.6 to 1.0 mm. Increasing the number of cells from 8 to 20 increased the absorption coefficient and lowered the response frequency.

DLP 3D printing technique was used to successfully manufacture tetrakaidecahedron-based acoustic metamaterial samples. A novel study on the effects of geometric parameters of tetrakaidecahedron cell-based acoustic metamaterial on the acoustic absorption coefficient was conducted, which seemed to be missing in the literature.

Wireless sensor networks (WSN), as a solution for buried water pipe monitoring, face a new set of challenges compared to traditional application for above-ground infrastructure monitoring. One of the main challenges for underground WSN deployment is the limited range (less than 3 m) at which reliable wireless underground communication can be achieved using radio signal propagation through the soil. To overcome this challenge, the purpose of this paper is to investigate a new approach for wireless underground communication using acoustic signal propagation along a buried water pipe.

An acoustic communication system was developed based on the requirements of low cost (tens of pounds at most), low power supply capacity (in the order of 1 W-h) and miniature (centimetre scale) size for a wireless communication node. The developed system was further tested along a buried steel pipe in poorly graded SAND and a buried medium density polyethylene (MDPE) pipe in well graded SAND.

With predicted acoustic attenuation of 1.3 dB/m and 2.1 dB/m along the buried steel and MDPE pipes, respectively, reliable acoustic communication is possible up to 17 m for the buried steel pipe and 11 m for the buried MDPE pipe.

Although an important first step, more research is needed to validate the acoustic communication system along a wider water distribution pipe network.

This paper shows the possibility of achieving reliable wireless underground communication along a buried water pipe (especially non-metallic material ones) using low-frequency acoustic propagation along the pipe wall.

Informed by acoustic design standards, the built environments are designed with single reverberation times (RTs), a trade-off between long and short RTs needed for different space functions. The novel intelligent passive room acoustic technology (IPRAT) has the potential to revolutionise room acoustics, thus, it is imperative to analyse and quantify its effect. IPRAT achieves real-time room acoustic improvement by integrating passive variable acoustic technology (PVAT) and acoustic scene classification (ASC). This paper aims to compare IPRAT simulation results with the AS/NZS 2107:2016 Australian/New Zealand recommended design acoustic standards.

In this paper 20 classroom environments are virtually configured for the simulation, multiplying 5 classrooms with 4 aural situations typical to New Zealand classrooms. The acoustic parameters RT, sound clarity (C50) and sound strength (G) are considered and analysed in the simulation. These parameters can be used to determine the effects of improved acoustics for both teacher vocal relief and student comprehension. The IPRAT was assumed to vary RT and was represented in the simulation by six different absorption coefficient spectrums.

The optimised acoustic parameters were derived from relationships between C50, RT and G. These relationships and optimal RTs contribute a unique database to literature. IPRAT’s advantages were discerned from a comparison of “current,” “attainable” and “optimised” acoustic parameters.

By quantifying the effect of IPRAT, it is understood that IPRAT has the potential to satisfy the key recommendations of professional industry standards (for New Zealand namely; AS/NZS 2107:2016 recommended design acoustic standards).

The purpose of this study is to determine propeller damage based on acoustic recordings taken from unmanned aerial vehicle (UAV) propellers operated at different thrust conditions on a test bench. Propeller damage is especially critical for fixed-wing UAVs to sustain a safe flight. The acoustic characteristics of the propeller vary with different propeller damages.

For the research, feature extraction methods and machine learning techniques were used during damage detection from propeller acoustic data. First of all, sound recordings were obtained by operating five different damaged propellers and undamaged propellers under three different thrusts. Afterwards, the harmonic-to-noise ratio (HNR) feature extraction technique was applied to these audio recordings. Finally, model training and validation were performed by applying the Gaussian Naive Bayes machine learning technique to create a diagnostic approach.

A high recall value of 96.19% was obtained in the performance results of the model trained according to damaged and undamaged propeller acoustic data. The precision value was 73.92% as moderate. The overall accuracy value of the model, which can be considered as general performance, was obtained as 81.24%. The F1 score has been found as 83.76% which provides a balanced measure of the model’s precision and recall values.

This study include provides solid method to diagnose UAV propeller damage using acoustic data obtain from the microphone and allows identification of differently damaged propellers. Using that, the risk of in-flight failures can be reduced and maintenance costs can be lowered with addressing the occurred problems with UAV propeller before they worsen.

This study introduces a novel method to diagnose damaged UAV propellers using the HNR feature extraction technique and Gaussian Naive Bayes classification method. The study is a pioneer in the use of HNR and the Gaussian Naive Bayes and demonstrates its effectiveness in augmenting UAV safety by means of propeller damages. Furthermore, this approach contributes to UAV operational reliability by bridging the acoustic signal processing and machine learning.

The purpose of this paper is to highlight the sources of noise generation in a library and suggest the implementation of a sound masking system to provide acoustic comfort, maintain speech privacy and create an environment more engaging for the users.

Analyzing the existing literature and exploring the existing practices as observed in different libraries, the study gives an overview of the sound masking initiatives in libraries.

With practical examples of libraries, the study demonstrates how a sound masking system has been implemented to invoke better acoustic design in the library. The expansion of various activities in the library and a gradual shift from individual attention to a collaborative approach necessitates a strong focus on the acoustic design architecture of the library. The study showcases how the libraries adopt sound masking with the introduction of acoustic panels, dual panel partitions, sound-absorbent false ceilings, sound insulation, sound isolation and noise-dampening measures, installing furniture with sound containment features, adopting vibration control mechanism, mounting of white noise machines, etc., keeping the aesthetic quotient of the library alive.

The study attempts to show the current practices of the adoption of the sound masking system in libraries and promotes collaborative reading with the creation of an acoustic design-influenced library environment to control noise and reverberation and provide a comfortable reading environment.

This study aims to investigate the noise-inducing characteristics during the start-up process of a mixed-flow pump and the impact of different start-up schemes on pump noise.

This study conducted numerical simulations on the mixed-flow pump under different start-up schemes and investigated the flow characteristics and noise distribution under these schemes.

The results reveal that the dipole noise is mainly caused by pressure fluctuations, while the quadrupole noise is mainly generated by the generation, development and breakdown of vortices. Additionally, the noise evolution characteristics during the start-up process of the mixed-flow pump can be divided into the initial stage, stable growth stage, impulse stage and stable operation stage.

The findings of this study can provide a theoretical basis for the selection of start-up schemes for mixed-flow pumps, reducing flow noise and improving the operational stability of mixed-flow pumps.

The purpose of this paper is to systematically map research on the effect of classroom acoustics and noise on high school students’ listening, learning and well-being, as well as identify knowledge gaps to inform future research.

This scoping review followed the PRISMA-ScR protocol. A comprehensive search of four online databases (ERIC, PubMed, Scopus and Web of Science) was conducted. Peer-reviewed papers were included if they conducted a study on the effect of classroom acoustics or noise on students’ listening, learning or well-being; had a clear definition of the noise level measurement; were conducted with high school students; and had the full text in English available.

In total, 14 papers met the criteria to be included in the review. The majority of studies assessed the impact of noise on students’ listening, learning or well-being. Overall, the results showed that higher noise levels have a negative effect on students’ listening, learning and well-being. Effects were even more pronounced for students who were non-native speakers or those with special educational needs such as hearing loss. Therefore, it would be beneficial to limit unnecessary noise in the classroom as much as possible through acoustic insulation, acoustic treatment and classroom management strategies.

This paper is the first review paper to synthesize previous research on the effect of classroom acoustics and noise on high school students’ listening, learning and well-being. It provides an analysis of the limitations of existing literature and proposes future research to help fill in these gaps.