Search results

Forecasts of commodity prices are vital issues to market participants and policy makers. Those of corn are of no exception, considering its strategic importance. In the present study, the authors assess the forecast problem for the weekly wholesale price index of yellow corn in China during January 1, 2010–January 10, 2020 period.

The authors employ the nonlinear auto-regressive neural network as the forecast tool and evaluate forecast performance of different model settings over algorithms, delays, hidden neurons and data splitting ratios in arriving at the final model.

The final model is relatively simple and leads to accurate and stable results. Particularly, it generates relative root mean square errors of 1.05%, 1.08% and 1.03% for training, validation and testing, respectively.

Through the analysis, the study shows usefulness of the neural network technique for commodity price forecasts. The results might serve as technical forecasts on a standalone basis or be combined with other fundamental forecasts for perspectives of price trends and corresponding policy analysis.

The spatiotemporal compression effect of China–Europe Railway Express (CR-Express) can reduce the flow costs of resources between China’s node cities. Additionally, it can break through the limitations of low-added-value marine products, significantly impacting the logistics industry efficiency. However, there are few literature verifying and analyzing its heterogeneity. This study explores the impact of CR-Express on the efficiency of logistics industry in node cities and analyzes the heterogeneity.

First, this study uses panel data to measure the efficiency of node city logistics industry. Secondly, this study discusses the impact of the opening of CR-Express on the efficiency of logistics industry in node cities based on the multi-period differential model. Finally, according to the node city difference, the sample city experimental group is grouped for heterogeneity analysis.

The results show that CR-Express can promote the urban logistics industry efficiency, with an average effect of 4.55%. According to the urban characteristics classification, the heterogeneity analysis shows that the efficiency improvement effect of logistics industry in inland cities is more obvious. The improvement effect of node cities and central cities in central and western China is stronger, especially in the sample of megacities and type I big cities. Compared with non-value chain industrial products, the CR-Express has significant promotion effects on the logistics efficiency of the cities where main goods are value chain products.

Under the background of double cycle development, this paper can provide a scientific basis for the investment benefit evaluation of CR-Express construction and the follow-up route planning.

This review aims to give a critical view of the wheel/rail high frequency vibration-induced vibration fatigue in railway bogie.

Vibration fatigue of railway bogie arising from the wheel/rail high frequency vibration has become the main concern of railway operators. Previous reviews usually focused on the formation mechanism of wheel/rail high frequency vibration. This paper thus gives a critical review of the vibration fatigue of railway bogie owing to the short-pitch irregularities-induced high frequency vibration, including a brief introduction of short-pitch irregularities, associated high frequency vibration in railway bogie, typical vibration fatigue failure cases of railway bogie and methodologies used for the assessment of vibration fatigue and research gaps.

The results showed that the resulting excitation frequencies of short-pitch irregularity vary substantially due to different track types and formation mechanisms. The axle box-mounted components are much more vulnerable to vibration fatigue compared with other components. The wheel polygonal wear and rail corrugation-induced high frequency vibration is the main driving force of fatigue failure, and the fatigue crack usually initiates from the defect of the weld seam. Vibration spectrum for attachments of railway bogie defined in the standard underestimates the vibration level arising from the short-pitch irregularities. The current investigations on vibration fatigue mainly focus on the methods to improve the accuracy of fatigue damage assessment, and a systematical design method for vibration fatigue remains a huge gap to improve the survival probability when the rail vehicle is subjected to vibration fatigue.

The research can facilitate the development of a new methodology to improve the fatigue life of railway vehicles when subjected to wheel/rail high frequency vibration.

Social relationships play an important role in organizational entrepreneurship. They are crucial to entrepreneurs’ decisions because, despite the bleeding-edge technological advancements observed nowadays, entrepreneurs as human beings will always strive to be social. During the COVID-19 pandemic many companies moved activities into the virtual world and as a result offline Social relationships became rarer, but as it turns out, even more valuable, likewise, the inter-organizational cooperation enabling many companies to survive.

This chapter aims to develop knowledge about entrepreneurs’ SR and their links with inter-organizational cooperation. The results of an integrative systematic literature review show that the concept of Social relationships, although often investigated, lacks a clear definition, conceptualization, and operationalization. This chapter revealed a great diversity of definitions for Social relationships, including different scopes of meaning and levels of analysis. The authors identify 10 building blocks and nine sources of entrepreneurs’ Social relationships. The authors offer an original typology of Social relationships using 12 criteria. Interestingly, with regard to building blocks, besides those frequently considered such as trust, reciprocity and commitment, the authors also point to others more rarely and narrowly discussed, such as gratitude, satisfaction and affection. Similarly, the authors discuss the varied scope of sources, including workplace, family/friendship, past relationships, and ethnic or religious bonds. The findings of this study point to a variety of links between Social relationships and inter-organizational cooperation, including their positive and negative influences on one another. These links appear to be extremely dynamic, bi-directional and highly complex.

Research on grey systems is becoming more sophisticated, and grey relational and prediction analyses are receiving close review worldwide. Particularly, the application of grey systems in marine economics is gaining importance. The purpose of this paper is to summarize and review literature on grey models, providing new directions in their application in the marine economy.

This paper organized seminal studies on grey systems published by Chinese core journal database – CNKI, Web of Science and Elsevier from 1982 to 2018. After searching the aforementioned database for the said duration, the authors used the CiteSpace visualization tools to analyze them.

The authors sorted the studies according to their countries/regions, institutions, keywords and categories using the CiteSpace tool; analyzed current research characteristics on grey models; and discussed their possible applications in marine businesses, economy, scientific research and education, marine environment and disasters. Finally, the authors pointed out the development trend of grey models.

Although researches are combining grey theory with fractals, neural networks, fuzzy theory and other methods, the applications, in terms of scope, have still not met the demand. With the increasingly in-depth research in marine economics and management, international marine economic research has entered a new period of development. Grey theory will certainly attract scholars’ attention, and its role in marine economy and management will gain considerable significance.

In this paper, the C80 special coal gondola car was taken as the subject, and the load test data of the car body at the center plate, side bearing and coupler measured on the dedicated line were broken down to generate the random load component spectrums of the car body under five working conditions, namely expansion, bouncing, rolling, torsion and pitching according to the typical motion attitude of the car body.

On the basis of processing the measured load data, the random load component spectrums were equivalently converted into sinusoidal load component spectrums for bench test based on the principle of pseudo-damage equivalence of load. Relying on the fatigue and vibration test bench of the whole railway wagon, by taking each sinusoidal load component spectrum as the simulation target, the time waveform replication (TWR) iteration technology was adopted to create the drive signal of each loading actuator required for the fatigue test of car body on the bench, and the drive signal was corrected based on the equivalence principle of measured stress fatigue damage to obtain the fatigue test loads of car body under various typical working conditions.

The fatigue test results on the test bench were substantially close to the measured test results on the line. According to the results, the relative error between the fatigue damage of the car body on the test bench and the measured damage on the line was within the range of −16.03%–27.14%.

The bench test results basically reproduced the fatigue damage of the key parts of the car body on the line.

During the construction process of the China Railway Track System (CRTS) I type filling layer, the nonwoven fabric bags have been used as grouting templates for cement asphalt (CA) emulsified mortar. The porous structure of nonwoven fabrics endowed the templates with breathability and water permeability. The standard requires that the volume expansion rate of CA mortar must be controlled within 1%–3%, which can generate expansion pressure to ensure that the cavities under track slabs are filled fully. However, the expansion pressure caused some of the water to seep out from the periphery of the filling bag, and it would affect the actual mix proportion of CA mortar. The differences in physical and mechanical properties between the CA mortar under track slabs and the CA mortar formed in the laboratory were studied in this paper. The relevant results could provide important methods for the research of filling layer materials for CRTS I type and other types of ballastless tracks in China.

During the inspection of filling layer, the samples of CA mortar from different working conditions and raw materials were taken by uncovering the track slabs and drilling cores. The physical and mechanical properties of CA mortar under the filling layer of the slab were systematically analyzed by testing the electrical flux, compressive strength and density of mortar in different parts of the filling layer.

In this paper, the electric flux, the physical properties and mechanical properties of different parts of CA mortar under the track slab were investigated. The results showed that the density, electric flux and compressive strength of CA mortar were affected by the composition of raw materials for dry powders and different parts of the filling layer. In addition, the electrical flux of CA mortar gradually decreased within 90 days’ age. The electrical flux of samples with the thickness of 54 mm was lower than 500 C. Therefore, the impermeability and durability of CA mortar could be improved by increasing the thickness of filling layer. Besides, the results showed that the compressive strength of CA mortar increased, while the density and electric flux decreased gradually, with the prolongation of hardening time.

During 90 days' age, the electrical flux of the CA mortar gradually decreased with the increase of specimen thickness and the electrical flux of the specimens with the thickness of 54 mm was lower than 500 C. The impermeability and durability of the CA mortar could be improved by increasing the thickness of filling layer. The proposed method can provide reference for the further development and improvement of CRTS I and CRTS II type ballastless track in China.

The aggregate index and per capita index have different meanings for some countries or regions. CO₂ emissions per capita matters for China because of its huge population. Therefore, this study aims to deepen the understanding of Kuznets curve from the perspective of CO₂ emissions per capita. In this study, mathematical formulas will be derived and verified.

First, this study verified the existing problems with the environmental Kuznets curve (EKC) through multiple regression. Second, this study developed a theoretical derivation with the Solow model and balanced growth and explained the underlying principles of the EKC’s shape. Finally, this study quantitatively analyzed the influencing factors.

The CO₂ emission per capita is related to the per capita GDP, nonfossil energy and total factor productivity (TFP). Empirical results support the EKC hypothesis. When the proportion of nonfossil and TFP increase by 1%, the per capita CO₂ decrease by 0.041 t and 1.79 t, respectively. The growth rate of CO₂ emissions per capita is determined by the difference between the growth rate of output per capita and the sum of efficiency and structural growth rates. To achieve the CO₂ emission intensity target and economic growth target, the growth rate of per capita CO₂ emissions must fall within the range of [−0.92%, 6.1%].

Inspired by the EKC and balanced growth, this study investigated the relationships between China’s environmental variables (empirical analysis) and developed a theoretical background (macro-theoretical derivation) through formula-based derivation, the results of which are universally valuable and provide policymakers with a newly integrated view of emission reduction and balanced development to address the challenges associated with climate change caused by energy.

Using a sample of 9,898 firm-year observations from 1,821 unique Chinese listed firms over the period from 2004 to 2019, this study aims to investigate whether the market rewards meeting or beating analyst earnings expectations (MBE).

The authors use an event study methodology to capture market reactions to MBE.

The authors document a stock return premium for beating analyst forecasts by a wide margin. However, there is no stock return premium for firms that meet or just beat analyst forecasts, suggesting that the market is skeptical of earnings management by these firms. This market underreaction is more pronounced for firms with weak external monitoring. Further analysis shows that meeting or just beating analyst forecasts is indicative of superior future financial performance. The authors do not find firms using earnings management to meet or just beat analyst forecasts.

The authors provide evidence of market underreaction to meeting or just beating analyst forecasts, with the market's over-skepticism of earnings management being a plausible mechanism for this phenomenon.

The findings of this study are informative to researchers, market participants and regulators concerned about the impact of analysts and earnings management and interested in detecting and constraining managers' earnings management.

The authors provide new insights into how the market reacts to MBE by showing that the market appears to focus on using meeting or just beating analyst forecasts as an indicator of earnings management, while it does not detect managed MBE. Meeting or just beating analyst forecasts is commonly used as a proxy for earnings management in the literature. However, the findings suggest that it is a noisy proxy for earnings management.