Search results

This study aims to enhance merging of additive manufacturing (AM) techniques with powder injection molding (PIM). In this way, the prototypes could be 3D-printed and mass production implemented using PIM. Thus, the surface properties and mechanical performance of parts produced using powder/polymer binder feedstocks [material extrusion (MEX) and PIM] were investigated and compared with powder manufacturing based on direct metal laser sintering (DMLS).

PIM parts were manufactured from 17-4PH stainless steel PIM-quality powder and powder intended for powder bed fusion compounded with a recently developed environmentally benign binder. Rheological data obtained at the relevant temperatures were used to set up the process parameters of injection molding. The tensile and yield strengths as well as the strain at break were determined for PIM sintered parts and compared to those produced using MEX and DMLS. Surface properties were evaluated through a 3D scanner and analyzed with advanced statistical tools.

Advanced statistical analyses of the surface properties showed the proximity between the surfaces created via PIM and MEX. The tensile and yield strengths, as well as the strain at break, suggested that DMLS provides sintered samples with the highest strength and ductility; however, PIM parts made from environmentally benign feedstock may successfully compete with this manufacturing route.

This study addresses the issues connected to the merging of two environmentally efficient processing routes. The literature survey included has shown that there is so far no study comparing AM and PIM techniques systematically on the fixed part shape and dimensions using advanced statistical tools to derive the proximity of the investigated processing routes.

In writing this article,¹ I have been guided by the questions of by what means the Xambioá deal with commerce and how it makes sense, and what part it plays in their attribution of meaning to the world. I attempt to demonstrate that the use of money, and internal commerce, among the Xambioá are not historical accidents. Money and merchandise are the objects of tireless experiences by the Xambioá. They appropriate meaningfully these allogenic elements and make them circulate in their own way. I suggest that the appropriation of a signifying element like money occurred not only because of its utility but because it is a highly meaningful element. People and things are introduced and are signified according to native logic.

The purpose of this study is to investigate the gendered ideas and ideals attached to an imagined ideal Entrepreneur in a post-industrial rural community in Sweden. While research has not yet clearly explained how the ideal entrepreneur is constructed, the result, i.e. the gendered representations of entrepreneurs, is well-researched. Previous results indicate a prevalent portrayal of entrepreneurship as a predominantly masculine construct characterised by qualities such as self-made success, confidence and assertiveness.

Ethnographic fieldwork was conducted in a community that is attempting to re-brand itself through garden tourism. Through inductive reasoning, this study analyses the gendered ideas and ideals regarding the community’s imagined ideal Entrepreneur who is to help the community solve its problems.

This study finds that the community forges the Entrepreneur into an imagined masculine ideal as holy, a saviour and a god and is replacing its historical masculine ironmaster with a masculine Entrepreneur. This study develops forging as a metaphor for the construction of the masculine ideal Entrepreneur, giving the community, rather than the entrepreneur himself, a voice as constructors. From social constructionism, this study emphasises how gendered ideas and ideals are shaped not only by the individual realities but more so in the reciprocal process by the realities of others.

The metaphor of forging adds an innovative theoretical dimension to the feminist constructionist approach and suggests focusing on how the “maleness” of entrepreneurship is produced and reproduced in the local. Previously, light has been shed on how male entrepreneurs perform their identities collectively; the focus of this study is on the social construction of this envisioned Entrepreneur within a rural community. The development of forging thus contributes as a way of analysing entrepreneurship in place. The choice of an ethnographic study allowed the authors to be a part of the real-life world of community members, providing rich data to explore entrepreneurship and gender.

This study aims to analyze the factors that drive or prevent interorganizational data sharing in the context of digital transformation (DT). Data sharing appears as a precondition for companies to capture emerging opportunities in supply chain management and for product-related servitization; however, there are ongoing concerns, and data are often perceived as the “new oil.” It is thus important to gain a better understanding of the determinants of firms’ decisions.

The authors develop an embedded case study analysis involving 16 firms within an extended supply network in the automotive industry. The authors focus on the peculiarities of the new context, as opposed to elements highlighted by research prior to the advent of the latest technologies. Abductive reasoning is applied to the theoretical foundations of the resource-based view, resource dependence theory and the complex adaptive systems perspective.

Data sharing is largely underpinned by factors identified prior to DT, such as data specificity, dependence dynamics and protection mechanisms and the dynamism of the business context. DT, however, can influence the extent of data sharing. New factors concern complementarities whenever data are pooled from different sources and digital platforms, as well as different forms of data ownership protection.

This study stresses that data sharing in the context of DT can be explained through established theoretical lenses, providing the integration of elements accounting for new technological opportunities.

The purpose of this paper is to review cases of artificial reefs built through additive manufacturing (AM) technologies and analyse their ecological goals, fabrication process, materials, structural design features and implementation location to determine predominant parameters, environmental impacts, advantages, and limitations.

The review analysed 16 cases of artificial reefs from both temperate and tropical regions. These were categorised based on the AM process used, the mortar material used (crucial for biological applications), the structural design features and the location of implementation. These parameters are assessed to determine how effectively the designs meet the stipulated ecological goals, how AM technologies demonstrate their potential in comparison to conventional methods and the preference locations of these implementations.

The overview revealed that the dominant artificial reef implementation occurs in the Mediterranean and Atlantic Seas, both accounting for 24%. The remaining cases were in the Australian Sea (20%), the South Asia Sea (12%), the Persian Gulf and the Pacific Ocean, both with 8%, and the Indian Sea with 4% of all the cases studied. It was concluded that fused filament fabrication, binder jetting and material extrusion represent the main AM processes used to build artificial reefs. Cementitious materials, ceramics, polymers and geopolymer formulations were used, incorporating aggregates from mineral residues, biological wastes and pozzolan materials, to reduce environmental impacts, promote the circular economy and be more beneficial for marine ecosystems. The evaluation ranking assessed how well their design and materials align with their ecological goals, demonstrating that five cases were ranked with high effectiveness, ten projects with moderate effectiveness and one case with low effectiveness.

AM represents an innovative method for marine restoration and management. It offers a rapid prototyping technique for design validation and enables the creation of highly complex shapes for habitat diversification while incorporating a diverse range of materials to benefit environmental and marine species’ habitats.

This paper aims to investigate the process by which performative technologies (PTs), in this case accreditation work in a business school, take form and how humans engage in making up such practices. It studies how academics come to accept and even identify with the quantitative representations of themselves in a translation process.

The research involved a longitudinal, self-ethnographic case study that followed the accreditation process of one Nordic business school from 2015 to 2021.

The findings show how the PT pushed for different engagements in various phases of the translation process. Early in the translation process, the PT promoted engagement because of self-realization and the ability for academics to proactively influence the prospective competitive milieu. However, as academic qualities became fabricated into numbers, the PT was able to request compliance, but also to induce self-reflection and self-discipline by forcing academics to compare themselves to set qualities and measures.

The paper advances the field by linking five phases of the translation process, problematization, fabrication, materialization, commensuration and stabilization, to a discussion of why academics come to accept and identify with the quantitative representations of themselves. The results highlight that the materialization phase appears to be the critical point at which calculative practices become persuasive and start influencing academics’ thoughts and actions.

Property guardianship is increasingly being viewed as an alternative and, in many cases, a last resort to the unaffordable private rental market. This upsurge in the incidence of guardianship necessarily amplifies the existing legal grey areas and the inherent insecurity and precarity in the sector for guardians. Drawing on interviews with property guardians and archival research, the purpose of this study is to explore the background to the guardianship occupation model; highlight the key problems guardianship generates and, building on this, propose recommendations for reform to the regulatory landscape of guardianship. This study argues that a culture change in property guardianship is needed so that guardians can be better protected, and local authorities empowered to be more proactive in overseeing standards of guardian properties in their areas.

This study draws on qualitative semi-structured interviews with 46 property guardians and archival research.

The author argues that property guardians routinely enter the sector largely as a matter of last resort based on financial considerations or following difficult life experiences. Insecure and precarious, guardianship operates under licence agreements which provide less protection for guardians. Coupled with ambiguity around the application of existing housing legislation to guardianship and research showing non-engagement by local authorities with guardianship, this study suggests regulatory reform is urgently needed.

With traditional residential tenancies in the private rental sector increasingly unaffordable for many and guardianship becoming a viable alternative, this study argues for significant regulatory reform to the guardianship sector to ensure guardians are adequately protected under the law. This study presents a series of proposals to deliver a culture change in the sector.

This study aims to propose the reuse of PA12 (powder) in another AM process, binder jettiinng, which is less sensitive to the chemical and mechanical degradation of the powder after multiple cycles in the laser system.

The experimental process for evaluating the reuse of SLS powders in a subsequent binder jetting process consists of four phases: powder characterization, bonding analysis, mixture testing and mixture characteristics. Analyses were carried out using techniques such as Fourier Transform Infrared Spectroscopy, scanning electron microscopy, thermogravimetric analysis and stress–strain tests for tension and compression. The surface roughness, color, hardness and density of the new mixture were also determined to find physical characteristics. A Taguchi design L8 was used to search for a mixture with the best mechanical strength.

The results indicated that the integration of waste powder PA12 with calcium sulfate hemihydrate (CSH) generates appropriate particle distribution with rounded particles of PA12 that improve powder flowability. The micropores observed with less than 60 µm, facilitated binder and infiltrant penetration on 3D parts. The 60/40 (CSH-PA12) mixture with epoxy resin postprocessing was found to be the best-bonded mixture in mechanical testing, rugosity and hardness results. The new CSH-PA12 mixture resulted lighter and stronger than the CSH powder commonly used in binder jetting technology.

This study adds value to the polymer powder bed fusion process by using its waste in a circular process. The novel reuse of PA12 waste in an established process was achieved in an accessible and economical manner.