Search results

Brief introduction on the importance and the need for plastic analysis methods were presented in the beginning section of this review. The plastic method for analysis was considered to be the more advanced method of analysis because of its ability to represent the true behaviour of the steel structures. Then in the following section, a literature analysis has been carried out on the previous investigations done on steel plates, steel beams and steel frames by other authors. The behaviour of them under different types of loading were presented and are under the investigation of innovative new analysis methods.

Structure member connections also have the potential for plastic failure. In this study, the authors have highlighted a few topics to be discussed. The three topics in this study are T-end plate connections to a square hollow section, semi-rigid connections and cold-formed steel storage racks with spine bracings using speed-lock connections. Connection is one of the important parts of a structure that ensures the integrity of the structure. Finally, in this technical paper, the authors introduce some topics related to seismic action. Application of the Theory of Plastic Mechanism Control in seismic design is studied in the beginning. At the end, its in-depth application for moment resisting frames-eccentrically braced frames dual systems is investigated.

When this study involves the design of a plastic structure, the design criteria must involve the ultimate load rather than the yield stress. As the steel behaves in the plastic range, it means the capacity of the steel has reached the ultimate load. Ultimate load design and load factor design are the methods in the range of plastic analysis. After the steel capacity has reached beyond the yield stress, it fulfills the requirement in this method. The plastic analysis method offers a consistent and logical approach to structural analysis. It provides an economical solution in terms of steel weight, as the sections designed using this method are smaller compared with elastic design methods.

The plastic method is the primary approach used in the analysis and design of statically indeterminate frame structures.

Marine plastic pollution (MPP) is increasing in recent times because of the high usage of plastic products. Green consumption behaviour (GCB) gaining attention as effective approach to achieving sustainable source reduction of plastic pollution, which negatively affects both human pollution and marine biodiversity and ecosystem. Although, Higher Education (HE) students are key stakeholders in addressing environmental issues, including MPP, there is limited empirical research in Ghana on factors influencing HE students’ GCB. This study, in an endeavour to bridge the gap, used the revised theory of planned behaviour (TPB) framework to investigate the factors influencing higher-education students’ green consumption behaviour in the Ghanaian context. Specifically, the purpose of the study is to examine the interplay of consumer novelty seeking (CNS), environmental concern (EC), perceived behavioural control and social influence on green consumption behaviour among higher-education students in Ghana. The study also explored the moderating role of gender in the relationship between CNS and green consumption behaviour.

This study used quantitative approach to obtain data from a sample of 233 students at the University of Cape Coast and used the partial least squares structural equation modelling approach for the data analysis.

The findings provide valuable insights, highlighting the important role of CNS and ECs in driving higher education students’ green consumption behaviour in Ghana. This study also found a revealing role for gender as a moderator in the relationship between CNS and green consumption behaviour, with females exhibiting a more pronounced response to CNS in influencing green consumption behaviour. On the contrary, the authors found a non-significant impact of perceived behavioural control and social influence.

Although this study presents results that provide valuable insights for policy and practical implications, it has some limitations worth mentioning for future research directions. Firstly, the participants sampled for this study comprised only higher education students from the University of Cape Coast in Ghana, which may limit the applicability of the findings to other student populations at various universities in Ghana and beyond. Moreover, the exclusion of non-students who are considered as “Generation Z” (i.e. born within 1995–2010) may narrow the scope of generalisability in the context of young consumers’ green consumption behaviour in Ghana. To enhance the generalisability of future studies, it is recommended that the scope of this study be extended. Furthermore, it should be noted that this study primarily measured higher education students’ green consumption behaviour based on self-reported data. Therefore, future research could adopt alternative approaches, such as non-self-reported measures or experimental data so to reduce the complexities and the gap that may exist between attitudes and behaviour.

These results provide valuable insights for policymakers, educators and environmental advocates to develop targeted initiatives that resonate with Ghanaian higher education students to foster green consumption practices and contribute to global efforts against marine plastic pollution.

The novelty of this study lies in the decision to propose a TPB model by including variables like CNS and EC that are believed to positively shape attitudes towards green consumption behaviour. The rationale for examining these variables is grounded in the belief that they are appropriate factors that may predict students’ green consumer behaviour, which may serve as a potential solution to marine plastic pollution.

Plastic pollution is a major issue that plagues modern society. Scholars are interested in comprehending consumers’ behavioural actions to address plastic pollution. This study aims to delve into the determinants of consumers’ engagement with social media as a medium to address plastic pollution.

A conceptual model is developed that extends the behavioural reasoning theory (BRT). Using a quantitative approach, 476 responses underwent structural equation modelling analysis.

Results indicate that “reasons for” positively correlate with attitude and intention towards socially responsible engagement. Contrarily, “Reasons against” demonstrated a positive association with socially responsible engagement intention. Attitudes favouring socially responsible engagement correlate positively with the underlying intention. The moderation analysis underscores the positive relation of social return on social media with consumers’ attitude and their “reasons for” leaning towards socially responsible engagement intention. Notably, a positive connection was established between socially responsible engagement intention and the trifecta of consumption, contribution and content creation behaviours.

By enhancing the BRT, this research sheds light on novel perspectives regarding consumers’ engagement on social media platforms. Distinctively, it is among the handful of studies probing the influence of behavioural intention across diverse behavioural outcomes. The insights gained from this study, grounded in empirical evidence from an emerging market, are poised to guide policymakers, governmental agencies and industry practitioners in formulating effective strategies to combat plastic pollution. Additionally, the study can assist in achieving the UN sustainable development goals (SDGs), specifically SGD 12, SGD 13, SDG 14 and SGD 17.

Solid, liquid and e-waste pose serious health hazards, environmental pollution and contribute to climate change. To address these issues of solid waste management (SWM), amidst many policy decisions, the Government of India roped in several institutions, including self-help groups (SHGs), into the Swachh Bharat Movement (Clean India Mission). This study aims to illustrate the significant contributions of SHG’s in tackling SWM, particularly the plastic waste menace in India, while fostering socio-economic values and sustainable development goals (SDGs).

Using a from-the-field approach, qualitative data were collected from 30 members of three SHGs to understand their significant contributions in mitigating plastic waste.

This research identifies three major themes: economic value creation, social value creation and SDGs via collection and reduction of plastic waste landfills. Furthermore, several related subthemes are identified.

This study offers pragmatic solutions to deal with plastic waste at personal, community, institutional and governmental levels. Moreover, it recommends engaging SHGs to promote sustainable waste management practices such as segregating wastes at source, regulating plastic bag usage, advocating behavioural change towards waste generation and protecting the environment.

The authors consider a proven case of SHG’s contribution to protect the environment and emphasize the need to involve more such groups in waste management practices.

The study delves into the influence of wear cycles on these parameters. The purpose of this paper is to identify characteristic patterns of σ_RS and ε_PEEQ that discern varying wear situations, thereby contributing to the enrichment of wear theory. Furthermore, the findings serve as a foundational basis for nondestructive and in situ wear detection methodologies, such as nonlinear ultrasonic detection, known for its sensitivity to σ_RS and ε_PEEQ.

This paper elucidates the wear mechanism through the lens of residual stress (σ_RS) and plastic deformation within distinct fretting regimes, using a two-dimensional cylindrical/flat contact model. It specifically explores the impact of the displacement amplitude and cycles on the distribution of residual stress and equivalent plastic strain (ε_PEEQ) in both gross slip regime and partial slip regimes.

Therefore, when surface observation of wear is challenging, detecting the σ_RS trend at the center/edge, region width and ε_PEEQ distribution, as well as the maximum σ_RS distribution along the depth, proves effective in distinguishing wear situations (partial or gross slip regimes). However, discerning wear situations based on ε_PEEQ along the depth direction remains challenging. Moreover, in the gross slip regime, using σ_RS distribution or ε_PEEQ along the width direction rather than the depth direction can effectively provide feedback on cycles and wear range.

This work introduces a novel perspective for investigating wear theory through the distribution of residual stress (σ_RS) and equivalent plastic strain (ε_PEEQ). It presents a feasible detection theory for wear situations using nondestructive and in situ methods, such as nonlinear ultrasonic detection, which is sensitive to σ_RS and ε_PEEQ.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-01-2024-0005/

The purpose of this study is to propose a simplifying approach for modelling a reliability test. Modelling the reliability tests of printed circuit board (PCB)/microelectronic component assemblies requires the adoption of several simplifying assumptions. This study introduces and validates simplified assumptions for modeling a four-point bend test on a PCB/wafer-level chip scale packaging assembly.

In this study, simplifying assumptions were used. These involved substituting dynamic imposed displacement loading with an equivalent static loading, replacing the spherical shape of the interconnections with simplified shapes (cylindrical and cubic) and transitioning from a three-dimensional modelling approach to an equivalent two-dimensional model. The validity of these simplifications was confirmed through both quantitative and qualitative comparisons of the numerical results obtained. The maximum principal plastic strain in the solder balls and copper pads served as the criteria for comparison.

The simplified hypotheses were validated through quantitative and qualitative comparisons of the results from various models. Consequently, it was determined that the replacement of dynamic loading with equivalent static loading had no significant impact on the results. Similarly, substituting the spherical shape of interconnections with an equivalent shape and transitioning from a three-dimensional approach to a two-dimensional one did not substantially affect the precision of the obtained results.

This study serves as a valuable resource for researchers seeking to model accelerated reliability tests, particularly in the context of four-point bending tests. The results obtained in this study will assist other researchers in streamlining their numerical models, thereby reducing calculation costs through the utilization of the simplified hypotheses introduced and validated herein.

The purpose of this paper is to investigate the thermomechanical response of four well-known lead-free die attach materials: sintered silver, sintered nano-copper particles, gold-tin solders and silver-tin transient liquid phase (TLP) bonds.

This examination is conducted through finite element analysis. The mechanical properties of all die attach systems, including elastic and Anand creep parameters, are obtained from relevant literature and incorporated into the numerical analysis. Consequently, the bond stress-strain relationships, stored inelastic strain energies and equivalent plastic strains are thoroughly examined.

The results indicate that silver-tin TLP bonds are prone to exhibiting higher inelastic strain energy densities, while sintered silver and copper interconnects tend to possess higher levels of plastic strains and deformations. This suggests a higher susceptibility to damage in these metallic die attachments. On the other hand, the more expensive gold-based solders exhibit lower inelastic strain energy densities and plastic strains, implying an improved fatigue performance compared to other bonding configurations.

The utilization of different metallic material systems as die attachments in power electronics necessitates a comprehensive understanding of their thermomechanical behavior. Therefore, the results of the present paper can be useful in the die attach material selection in power electronics.

In power electronics, there are various metallic material systems used as die attachments. The complete understanding of the thermomechanical behavior of such interconnections is very important. Therefore, this paper aims to examine the thermomechanical response of four famous die attach materials, including sintered silver, sintered nano-copper particles, gold-tin solders and silver-tin transient liquid phase (TLP) bonds, using nonlinear finite element analysis.

During the study, the mechanical properties of all die attach systems, including elastic and viscoplasticity parameters, are obtained from literature studies and hence incorporated into the numerical analysis. Subsequently, the bond stress–strain relationships, stored inelastic strain energies and equivalent plastic strains are thoroughly examined.

The results showed that the silver-tin TLP bonds are more likely to develop higher inelastic strain energy densities, while the sintered silver and copper interconnects would possess higher plastic strains and deformations. Suggesting higher damage to such metallic die attachments. The expensive gold-based solders have developed least inelastic strain energy densities and least plastic strains as well. Thus, they are expected to have improved fatigue performance compared to other bonding configurations.

This paper extensively investigates and compares the mechanical and thermal response of various metallic die attachments. In fact, there are no available research studies that discuss the behavior of such important die attachments of power electronics when exposed to mechanical and thermomechanical loads.

Manufacturing companies continue to encounter a diverse set of obstacles while embracing sustainable development goals. Accordingly, the purpose of this study is to explore critical sustainable development-related barriers to flexible packaging manufacturing companies in the New Zealand context.

Drawing on a qualitative multiple case studies approach, the authors collected data from the New Zealand flexible packaging industry. Semistructured interviews were conducted with the senior corporate managers in two large flexible packaging companies. Following the thematic analysis approach, the authors analyzed the information collected from the participants and synthesized our findings under the key dimensions of internal and external barriers to sustainable development.

The findings revealed that internal barriers to sustainable flexible packaging are linked to economic, operational and technical issues. Conversely, external barriers include global crises and disruption, customer behavior and preferences and institutional and infrastructural-related aspects. Based on the analysis of empirical findings, the authors further identified the underlying reasons for sustainable flexible packaging barriers and recommended guidelines that could assist corporate managers and policymakers in addressing obstacles inhibiting the flexible packaging industry from adopting sustainable business practices.

The authors argue that this study is one of the early studies to consider inhibiting factors to incorporate sustainable development into the New Zealand flexible packaging industry context. Building on a range of theoretical perspectives, the authors extend the current body of knowledge seeking to advance the sustainable development agenda in the New Zealand flexible packaging industry and offer recommended pathways fostering sustainable development in a distinctive manufacturing context.

This study aims to analyze the influence of farmers’ degree of participation in collective action on their adoption decisions and waiting time regarding soil and water conservation (SWC) measures.

The Probit model and Generalized Propensity Score Match method are used to assess the effect of the degree of participation in collective action on farmers’ adoption decisions and waiting time for implementing SWC measures.

The findings reveal that farmers’ engagement in collective action positively influences the decision-making process regarding terrace construction, water-saving irrigation and afforestation measures. However, it does not significantly impact the decision-making process for plastic film and ridge-furrow tillage practices. Notably, collective action has the strongest influence on farmers’ adoption decisions regarding water-saving irrigation technology, with a relatively smaller influence on the adoption of afforestation and terrace measures. Moreover, the results suggest that participating in collective action effectively reduces the waiting time for terrace construction and expedites the adoption of afforestation and water-saving irrigation technology. Specifically, collective action has a significantly negative effect on the waiting time for terrace construction, followed by water-saving irrigation technology and afforestation measures.

The results of this study underscore the significance of fostering mutual assistance and cooperation mechanisms among farmers, as they can pave the way for raising funds and labor, cultivating elite farmers, attracting skilled labor to rural areas, enhancing the adoption rate and expediting the implementation of terraces, water-saving irrigation technology and afforestation measures.

Drawing on an evaluation of farmers’ degree of participation in collective action, this paper investigates the effect of participation on their SWC adoption decisions and waiting times, thereby offering theoretical and practical insights into soil erosion control in the Loess Plateau.