Search results

When coping with uncertainties, three characteristics distinguish firms: agility, adaptability and alignment (triple-A). Based on significant field research, the triple-A highlights the significance of coordinating agility, adaptability and alignment. Start-ups are facing a lot of challenges in this turbulent environment. However, this sector is undergoing a major transformation. Agility, adaptability and alignment concepts have had a major influence on the supply chain, but their implementation in start-ups has been less visible. This paper aims to identify, analyze and categorize the enablers for agility, adaptability and alignment in start-ups using the total interpretive structural modeling (TISM) approach.

In addition to the scheduled interview, a closed-ended questionnaire was used to collect data. To identify how the factors interact, the TISM technique is used, and the Matriced’Impacts Croises-Multipication Applique’ and Classment method is used to rank and categorize the agility, adaptability and alignment enablers.

This study identified ten agility, adaptability and alignment factors for start-ups. It has been found that the key importance should be given to management involvement, conflict management, collaboration and information integration.

This study primarily focused on the agility, adaptability and alignment factors in start-ups.

This study will help academics and key stakeholders understand the aspects that lead to agility, adaptability and alignment in start-ups.

Agility, adaptability and alignment concepts have had a major influence on the supply chain, but their implementation in start-ups has been less visible. Therefore, this is a novel attempt in this industry’s agility, adaptability and alignment.

This study attempts to recognize obstacles and barriers to financial inclusion in the agriculture sector, propose a framework based on the inter-contextual link between the barriers and understand the financial exclusion in the agriculture sector at the grassroots level. Previously published research articles were used to identify the barriers to financial inclusion, followed by informal interviews and collaborative discussions with the local farmers of the Sonipat district of Haryana and expert interviews using a structured questionnaire. TISM and MICMAC analysis are used to decern the nature of the relationship among the barriers discovered. The authors find that inadequate financial literacy, a shortage of financial awareness and the reluctance of various financial institutions are significant linkage barriers to strong driving and dependence power. High transaction costs and poor infrastructural support are the independent barriers. The paper identifies these new barriers to financial inclusion in the Indian agriculture sector and the framework depicting financial exclusion in India. This paper only gives a framework of barriers and does not quantify the effect of any relationship identified, but strongly emphasizes granting the Indian agriculture sector broad and simple financial access to advance and strengthen the nation's sustainable, inclusive economic growth.

The current analysis was conducted to investigate the quality of surfaces and geometry of tracks printed using PolyMideTM CoPA, PolymaxTM PC and PolyMideTM PA6-CF materials through fused deposition modelling (FDM). This study also examined the degree of fusion of adjacent filaments (tracks) to approximate the optimal process parameters of the three materials.

Images of fused adjacent filaments were acquired using scanning electron microscopy (SEM), after which, they were analysed using Image J Software and Minitab Software to determine the optimal process parameters.

The optimal process parameters for PolyMideTM CoPA are 0.25 mm, 40 mm/s, −0.10 mm, 255°C and 0.50 mm for layer thickness, printing speed, hatch spacing, extrusion temperature and extrusion width, respectively. It was also concluded that the optimal process parameters for PolymaxTM PC are 0.30 mm, 40 mm/s, 0.00 mm, 260°C and 0.6 mm for layer thickness, printing speed, hatch spacing, extrusion temperature and extrusion width, respectively.

It was difficult to separate tracks printed using PolyMideTM PA6-CF from the support structure, making it impossible to examine and determine their degree of fusion using SEM.

The study provides more knowledge on FDM, which is one of the leading additive manufacturing technology for polymers. The information provided in this study helps in continued uptake of the technique, which can help create job opportunities, especially among the youth and young engineers.

This study proposes a new and a more accurate method for optimising process parameters of FDM at meso-scale level.

The rapid growth of 3D printing has transformed the cost-effective production of prototypes and functional items, primarily using extrusion technology with thermoplastics. This study aims to focus on optimizing mechanical properties, precisely highlighting the crucial role of mechanical compressive strength in ensuring the functionality and durability of 3D-printed components, especially in industrial and engineering applications.

Using the Box−Behnken experimental design, the research investigated the influence of layer thickness, wall perimeter and infill level on mechanical resistance through compression. Parameters such as maximum force, printing time and mass utilization are considered for assessing and enhancing mechanical properties.

The layer thickness was identified as the most influential parameter over the compression time, followed by the degree of infill. The number of surface layers significantly influences both maximum strength and total mass. Optimization strategies suggest reducing infill percentage while maintaining moderate to high values for surface layers and layer thickness, enabling the production of lightweight components with adequate mechanical strength and reduced printing time. Experimental validation confirms the effectiveness of these strategies, with generated regression equations serving as a valuable predictive tool for similar parameters.

This research offers valuable insights for industries using 3D printing in creating prototypes and functional parts. By identifying optimal parameters such as layer thickness, surface layers and infill levels, the study helps manufacturers achieve stronger, lighter and more cost-efficient components. For industrial and engineering applications, adopting the outlined optimization strategies can result in components with enhanced mechanical strength and durability, while also reducing material costs and printing times. Practitioners can use the developed regression equations as predictive tools to fine-tune their production processes and achieve desired mechanical properties more effectively.

This research contributes to the ongoing evolution of additive manufacturing, providing insights into optimizing structural rigidity through polylactic acid (PLA) selection, Box−Behnken design and overall process optimization. These findings advance the understanding of fused deposition modeling (FDM) technology and offer practical implications for more efficient and economical 3D printing processes in industrial and engineering applications.

This study aims to determine the current state of research on sustainability in the context of human resource management (HRM) practices adopted by small and medium-sized enterprises (SMEs), identify the most important gaps and propose an agenda for future studies.

Through a systematic literature review (SLR), this study comprehensively examines the relevant literature on sustainability-related aspects of HRM in SMEs. It includes descriptive and thematic analyses of 29 research articles published in high-ranked academic journals selected from 506 records retrieved from four major databases (Scopus, Web of Science, ScienceDirect and EBSCOhost).

The findings suggest a growing interest in sustainability-related HRM in SMEs after 2020. Notably, most studies focused on green and social sustainability concerns, with limited attention to the triple bottom line (TBL) perspective. A detailed examination revealed variations among the three streams of research in terms of methodology, location of studies, nature of sustainability-HRM linkage and placement of HRM practices in research models. Despite these differences, positive effects of HRM practices on sustainability integration seem evident, including impacts on employee competences, behaviors and company-level outcomes.

This article is the first to systematically review the literature on the sustainability-HRM nexus specifically for SMEs. It contributes by identifying thematic clusters, methodological trends, contextual aspects and outcomes of sustainability-HRM integration, thereby laying the groundwork for future research.

Organizational success in a dynamic environment demands leadership and agility. The extant literature on employee agility needs more empirical evidence and appropriate theoretical explanations. This study aims to contribute to the literature by bringing empirical evidence to understand the intervening mechanisms through which empowering leadership influences employee agility and to suggest alternate theoretical explanations.

The mediating role of knowledge-sharing behavior and psychological safety is examined using quantitative data from a sample of 924 employees working in India's information technology industry.

Findings reveal that empowering leadership contributes to psychological safety at the workplace, promoting employees' knowledge-sharing behavior and leading to employee agility. The findings are globally relevant and theoretically consistent.

The phenomenon is explained in two ways. Firstly, by combining the structural empowerment and motivation perspectives, and secondly, by combining the conservation of resources and social exchange perspectives.

The findings imply that psychological safety and knowledge-sharing behavior can be used as leading indicators to prepare the organization for success in a dynamic and volatile environment.

This study is one of the earliest attempts to explain the mediating mechanism between empowering leadership and employee agility using serial multiple mediations. Further, this study combines different theoretical perspectives to present the findings more logically.

This paper aims to highlight how the six sigma methods helped the medical equipment manufacturing company in finding and analysing the root causes that lead to the reduction in production rate, rejection rates, quality and other major causes that lead to the reduction in productivity of the blood bags manufacturing unit.

Given the critical nature of blood bag manufacturing Six Sigma was chosen as the primary methodology for this research since Six Sigma’s data-driven approach provides a structured framework to identify, analyse and rectify inefficiencies in the production processes. This study proposes the Six Sigma DMAIC (D-Define, M-Measure, A-Analyse, I-Improve, C-Control) encompassing rigorous problem definition, precise measurement, thorough analysis, improvement and vigilant control mechanisms for effectively attaining predetermined objectives.

The paper demonstrates how the Six Sigma principles were executed in a blood bag manufacturing unit. After a detailed and thorough data analysis, it was found that a total of 40 critical-to-quality factors under the five drivers such as Machine, Components, Inspection and Testing, People and Workspace were influential factors affecting the manufacturing of blood bags. From the study, it is identified that the drivers such as inspection and testing, components and machines contribute significantly to increasing productivity.

The paper offers valuable strategic insights into implementing Six Sigma methodologies within the specific context of a blood bag manufacturing unit. The Six Sigma tools and techniques used by the project team to solve issues within the blood bag manufacturing unit can be used for similar healthcare organizations to successfully deploy Six Sigma. The insights from this research might not be directly applicable to other manufacturing facilities or industries but can be used as a guiding reference for researchers and managers.

The current state of scholarly literature indicates a significant absence in the examination of Six Sigma methodologies designed specifically to improve production output in healthcare equipment manufacturing. This paper highlights the application of Six Sigma principles to enhance efficiency in the specific context of blood bag manufacturing.

This study aims to ascertain the impact education for sustainable development (ESD) on knowledge, attitude and behavior among senior (last year undergraduate) Indian students.

This study is a cross-sectional causal investigation with descriptive design using survey method. It uses the knowledge, attitude and behaviors toward the sustainable development scales of the International Institute of Sustainable Development (IISD) for data collection and partial least-square structural equation modelling for empirically testing the proposed research model.

The study results establish the importance of sustainability education on knowledge, attitude and behavior. The impact of knowledge on behavior is direct and partially mediated through the attitudinal pathway – indicating central and peripheral routes sustainability related information processing and attitude formation. The results also indicate poor knowledge of the impact of socio-cultural issues on sustainability.

The study results will help assess the impact current ESD initiatives in India and redesign the ESD curriculum in line with ESD for 2030 initiatives to facilitate the achievement of UN’s sustainable development goals by 2030. This study is limited to senior students and offers scope for extension to other groups.

The study results can help redesign the sustainability curriculum at the school and undergraduate levels in the country in line with ESD for 2023 objectives. The results indicate an urgent need to include the impact of sociocultural issues on sustainability to sensitize Indian students towards the same.

This study contributes to the sustainability education literature by assessing the impact of sustainability curricula on sustainability knowledge, attitude and behavior among Indian senior students – hitherto uninvestigated. It also will help in the informed redesign/ improvement of ESD curriculum under the ESD for 2030 initiatives.

The goal of this article is to provide an overview of healthcare entrepreneurship, both in terms of its current trends and future directions.

The article engages in a systematic review of extant research on healthcare entrepreneurship using the scientific procedures and rationales for systematic literature reviews (SPAR-4-SLR) as the review protocol and bibliometrics or scientometrics analysis as the review method.

Healthcare entrepreneurship research has fared reasonably well in terms of publication productivity and impact, with diverse contributions coming from authors, institutions and countries, as well as a range of monetary and non-monetary support from funders and journals. The (eight) major themes of healthcare entrepreneurship research revolve around innovation and leadership, disruption and technology, entrepreneurship models, education and empowerment, systems and services, orientations and opportunities, choices and freedom and policy and impact.

The article establishes healthcare entrepreneurship as a promising field of academic research and professional practice that leverages the power of entrepreneurship to advance the state of healthcare.

The article offers a seminal state of the art of healthcare entrepreneurship research.

Many firms have adopted different methodologies such as lean management to increase customer satisfaction. This is because they need to respond to customer demands for improved products and responsive service. This study aims to evaluate the influence of soft lean practices (SLP) on business performance in the service sector.

Out of 702 questionnaires distributed to various service companies in Zimbabwe, 260 valid responses were received. Structural equation modeling was used to assess the relationship among the factors of the proposed model.

The implementation of SLP leads to improvement in the business performance of the service companies. However, the impact of SLP on business performance is mainly indirect, mediated by customer satisfaction.

The research focused on the implementation of SLP in the service industry of a developing country; hence, the results obtained may require further investigations before generalization to other countries with different sociocultural contexts is made.

Most previous studies focused mainly on the implementation of the technical lean practices in the manufacturing industry without properly acknowledging the importance of SLP. This research investigates the importance of SLP in the service sector and further explores the mediatory role of customer satisfaction on business performance. The findings also validate the service-profit-chain theory.