Search results

This study aims to investigate NiTi alloys’ characterization and corrosion behaviour produced by two different powder metallurgy (PM) methods.

It was pre-formed under a protective atmosphere at 900 °C under a force of 45 MPa and sintered for 1 h under 10–6 Mbar in an atmosphere-controlled heat treatment furnace at 1,100 °C. The relationship between microstructural properties, SEM, XRD, density, microhardness and corrosion behaviour of pre-alloyed NiTi alloys produced by two different methods with the production method was investigated.

As a result of the studies, TiO, NiTi, NiTi2 and Ni3Ti intermetallics were determined in XRD examinations. The best surface roughness was observed in the mechanically milled (MM’ed) pre-alloyed NiTi alloy compared to the pre-alloyed NiTi alloy mixed with turbula. The corrosion tests performed in 3.5% NaCl solution determined that the MM’ed pre-alloyed NiTi alloy had better corrosion resistance than the pre-alloyed NiTi alloy mixed with turbula. Pitting corrosion was visualized in the SEM images taken from the corrosion surfaces.

Two different PM methods produced pre-alloyed NiTi powders, and the effects of these methods on the mechanical and corrosion resistance of NiTi alloys were systematically investigated for the first time.

The Internet of Things (IoT), as one of the new digital technologies, has created wide applications in various industries, and one of the most influential industries of this technology is the transportation industry. By integrating the IoT with the transportation industry, there will be dramatic changes in the industry, and it will provide many entrepreneurial opportunities for entrepreneurs to develop new businesses. Opportunity identification is at the heart of the entrepreneurial process, and entrepreneurs identify innovative goods or services to enter a new market by identifying, evaluating, and exploiting opportunities. Despite the desire of transportation managers to invest in the IoT and the increase in research in this area, limited research has focused on IoT-based entrepreneurial opportunities in the transportation industry. Therefore, the present study aims to identify IoT-based entrepreneurial opportunities in the transportation industry and examine their importance.

To achieve the research objective, the authors applied a mixed approach. First, adapting the lens of the industry value chain theory, a comprehensive literature review, besides a qualitative approach including semi-structured interviews with experts and thematic analysis, was conducted to identify the entrepreneurial opportunities. The identified opportunities were confirmed in the second stage using a quantitative survey method, including the Student t-test and factor analysis. Finally, the identified opportunities were weighted and ranked using the best worst method (BWM).

Entrepreneurial opportunities are classified into five main categories, including “smart vehicles”, “business partners/smart transportation supply side”, “supporting services”, “infrastructures”, and “smart transport management and control”. The infrastructures group of opportunities ranked the highest amongst the identified groups.

This study adds to the digital entrepreneurship opportunity recognition literature by addressing opportunities in a smart industry propelled by digital technologies, including developing new products or new applications of the available technologies. Additionally, inspired by the industry value chain theory, this article develops a framework including various digital entrepreneurial opportunity networks which are necessary to add value to any industry and, thus, could be applied by entrepreneurs to recognize opportunities for new intermediaries to enter other digital-based industries. Finally, the present study identifies the IoT-based entrepreneurial opportunities in the smart transportation industry and prioritizes them, providing practical insights regarding the creation of entrepreneurial ecosystems in the field of smart transportation for entrepreneurs and policymakers.

This study aims to evaluate the protection performance of zinc as sacrificial anode for ABS A steel in the presence of H₂S under different temperatures, pH and salinities.

In this paper, weight loss measurements and electrochemical measurements are used to evaluate the corrosion degree of zinc and ABS A steel.

Under the conditions involved in this work, it is shown that zinc is a nice sacrificial anode with the reason of its stable potential and excellent anode current efficiency according to the relevant standard. And it is also found that the hydrogen evolution does not occur on ABS A steel specimens. The potential difference between cathode and anode is suitable; thus, it can be concluded that each steel is well protected.

To the best of the authors’ knowledge, no other study has analyzed the protection mechanism and effect of zinc as sacrificial anode in H₂S-containing environments under high temperature at present.

This study aims to investigate the stability performance of partial journal bearings of 120° and 180° partial angles with micropolar lubricant.

To investigate the stability characteristics of partial journal bearing, a MATLAB source code is written. To solve the Reynolds’ equation, the finite element method is used. Stability performances of 120° and 180° partial journal bearings are computed for a wide range of non-dimensional micropolar fluid parameters and working eccentricities.

The presented results provide design data for stability parameters in terms of equivalent stiffness, whirl frequency ratio, critical mass and threshold speed of the rotor with respect to eccentricities and material size of the lubricant. The stability of 180° partial journal bearing is found to be higher than 120° partial journal bearing.

In open literature, it is rare to find the stability of a partial journal bearing lubricated with micropolar fluid. Very few researchers have studied the combined effect of eccentricities and micropolar lubricant parameters on the dynamic performance of such bearings. Hence, it is important to study the dynamic stability to explore the complete investigation of the performance of partial journal bearings with micropolar fluid.

Titanium alloys and composites have proven to contain desirable properties for use at elevated temperatures. One such material is the Ti750 composite, which can be used at temperatures up to 750°C for a brief period. This paper aims the microstructure, phase compositions, apparent porosity and hardness of both sintered and heat-treated TiC reinforced Ti750 composites for consideration in aircraft engine design.

The fabrication of TiC-reinforced Ti750 composites was achieved through spark plasma sintering (SPS). To analyze the microstructure and X-ray diffraction, a scanning electron microscope (SEM) with model number S-3400N and a D8 advance model machine were used, respectively. The microhardness of the samples was measured using a Vickers hardness tester with model HV-1000. The research incorporated three solid solution treatments: 975°C/3 h/AC, 1,010°C/3 h/AC and 1,025°C/3 h/AC, along with a solid-solution aging treatment at 1,010°C/3 h/AC + 750°C/8 h/AC. Additionally, oxidation analysis was conducted on the samples.

The microstructures contained enhanced TiC and Ti5Si3 phases in the near a-Ti matrix. The microhardness of the sintered composite was over twice that of the matrix alloy, and its porosity was reduced by about 0.35%. The sample treated at 1,010°C/3 h/AC had the highest enhanced peaks and microhardness of 1,277.1 HV. After oxidation at 800°C for 100 h, the accumulated weight of the solid solution composite at 1,010 °C/3 h/AC was the lowest (3.0 mg.cm^-2). The surface microstructure contained oxides of TiO2 and a spalling white area containing a small amount of Al₂O₃ and SiO₂.

There is limited research on Ti-Al-Sn-Zr-Mo-Si-based TMCs using a combination of the SPS method. This study used SiCp as a reinforcement for the Ti750 matrix alloy. The consolidation of SiCp and Ti750 powders using the SPS method, heat treatment of the resulting TiC reinforced Ti750 composites and study of the microstructure and properties of the composites are not found in literature or under consideration for publication in any media.

Patriotism is often described as the “love of country” that individuals display in the acclamation of their national community. Despite the prominence of this sentiment in various societies around the world, organizational research on patriotism is largely absent. This omission is surprising because entrepreneurs, human resource (HR) divisions, and firms frequently embrace both patriotism and patriotic organizational practices. These procedures include (among other interventions) national symbol embracing, HR practices targeted toward military members and first responders, the adulation of patriots and celebration of patriotic events, and patriotic-oriented corporate social responsibility (CSR). Here, the authors argue that research on HR management and organization studies will likely be further enhanced with a deeper understanding of the national obligation that can spur employee productivity and loyalty. In an attempt to jumpstart the collective understanding of this phenomenon, the authors explore the antecedents of patriotic organizational practices, namely, the effects of founder orientation, employee dispersion, and firm strategy. It is suggested that HR practices such as these lead to a patriotic organizational image, which in turn impacts investor, customer, and employee responses. Notably, the effect of a patriotic organizational image on firm-related outcomes is largely contingent on how it fits with the patriotic views of other stakeholders, such as investors, customers, and employees. After outlining this model, the authors then present a thought experiment of how this model may appear in action. The authors then discuss ways the field can move forward in studying patriotism in HR management and organizational contexts by outlining several future directions that span multiple levels (i.e., micro and macro). Taken together, in this chapter, the authors introduce a conversation of something quite prevalent and largely unheeded – the patriotic organization.

This paper aims to present a novel approach for computing particle temperatures in simulations coupling computational fluid dynamics (CFD) and discrete element method (DEM) to predict flow and heat transfer in fluidized beds of thermally thick spherical particles.

An improved lumped formulation based on Hermite-type approximations for integrals to relate surface temperature to average temperature and surface heat flux is used to overcome the limitations of classical lumped models. The model is validated through comparisons with analytical solutions for a convectively cooled sphere and experimental data for a fixed particle bed. The coupled CFD-DEM model is then applied to simulate a Geldart D bubbling fluidized bed, comparing the results to those obtained using the classical lumped model.

The validation cases demonstrate that ignoring internal thermal resistance can significantly impact the temperature in cases where the Biot number is greater than 0.1. The results for the fixed bed case clearly demonstrate that the proposed method yields significantly improved outcomes compared to the classical model. The fluidized bed results show that surface temperature can deviate considerably from the average temperature, underscoring the importance of accurately accounting for surface temperature in convective heat transfer predictions and surface processes.

The proposed approach offers a physically more consistent simulation without imposing a significant increase in computational cost. The improved lumped formulation can be easily and inexpensively integrated into a typical DEM solver workflow to predict heat transfer for spherical particles, with important implications for various industrial applications.

What kinds of support do interstate rivals provide to domestic actors in ongoing civil wars? And how do domestic actors utilize the support they receive? This chapter answers these questions by comparing Iranian and Saudi military and non-military (mediation, foreign aid and religious soft-power promotion) support to the Houthis and to the Government of Yemen (GoY) during the Saada wars (2004–2010) and the internationalized civil war (2015–2018). It also focuses on the processes through which the GoY and the Houthis have utilized this support for their own strategic purposes. This chapter applies a structured, focused comparison methodology and relies on data from a review of both primary and secondary sources complemented by 14 interviews. This chapter finds that there were less external interventions in the conflict in Saada than in the internationalized civil war. During the latter, a broader set of intervention strategies enabled further instrumentalization by domestic actors, which in turn contributed to the protracted nature of the conflict. This chapter contributes to the literature on interstate rivalry and third-party intervention. The framework of analysis is applicable to civil wars that experience intervention by rivals, such as Syria or Libya.