Search results

This study aims to combine information about sea level rise (SLR), the probability distribution of storm surge, a flood damage function and the value of property by elevation along the coast of selected cities to measure expected flood damage. The selected six cities all have nearby long-term tidal stations that can be used to estimate the probability distribution of floods. The model is calibrated to each city. The study then compares the cost of building higher seawalls today along the coast versus the benefit of each wall (the reduction in expected flood damage).

The combination of coastal storms and SLR has led to extensive flood damage across American cities. This study creates a simple generic model that evaluates whether seawalls would be effective at addressing this flooding problem. The paper develops an approach that readily measures the expected flood benefits and costs of alternative coastal seawalls. The approach takes account of near term SLR and the probability distribution of storm surge. The model finds seawalls are effective only in cities where many buildings are in the 25-year flood plain.

Cities with many buildings built on land below 2 m in elevation (the 25-year flood plain) have high expected flood damage from storms and SLR. Cities which already have many buildings in this flood plain would benefit from seawalls. Assuming seawalls are built above the high tide line, the optimal wall height that maximizes net benefits is between 0.9 to 1.2 m. These relatively low seawalls block 70%–83% of expected flood damage in these cities. Fair flood insurance is the least cost strategy for handling the remaining damages that overtop the optimal seawalls.

The analysis evaluates whether or not to build a seawall the length of each city at high tide lines. However, the analysis also finds several long stretches of coast in two cities where a wall is not warranted because there are few vulnerable buildings. Future analyses should consider seawalls in more spatially detailed sections of each city. Each section could then be analyzed independently. Whether or not more complex hydrodynamic models are needed to evaluate coastal resilience planning should also be explored. Alternative solutions such as planned retreat and nature-based solutions should be compared with seawalls in future studies as well.

Cities should be careful to avoid development in the 25-year flood plain because of high expected flood damage. Cities that have low elevation areas subject to frequent flooding should consider seawalls to reduce frequent flooding. Because they are very costly and have low expected benefits, high walls that can stop a one-hundred-year storm are generally not worth building.

The analysis reveals that the most important factor determining the vulnerability of cities along the eastern coastline of the USA is the number of buildings built below 2 m in elevation (the 25-year flood plain). Cities should use zoning to discourage further development in the 25-year flood plain. Cities which already have many buildings in this flood plain would benefit from city-wide seawalls. Assuming these walls are built at mean high-high tide, the optimal height of current seawalls should be relatively modest – averaging about 0.9–1.2 m above ground. Using fair insurance for the remaining risk is less expensive than building taller walls. In particular, the cost of seawalls that protect against a major hurricane surge are over three times the expected benefit and should not be built. As decades pass and observed sea level progresses, seawalls and the boundary of the 25-year flood plain should be reevaluated.

This paper develops a coastal flood model that combines SLR and the probability distribution of storm surges with the value of property by elevation to estimate the expected damage from storm surge. The model is relatively easy to calibrate making it a practical tool to guide city flood planning. The authors illustrate what insights such a model gives about coastal resilience to flooding across six cities along the Eastern US coastline.

The overall objective of this study is envisaged to provide decision makers with actionable insights and access to multi-risk maps for the most in-danger stave churches (SCs) among the existing 28 churches at high spatial resolution to better understand, reduce and mitigate single- and multi-risk. In addition, the present contribution aims to provide decision makers with some information to face the exacerbation of the risk caused by the expected climate change.

Material and data collection started with the consultation of the available literature related to: (1) SCs' conservation status, (2) available methodologies suitable in multi-hazard approach and (3) vulnerability leading indicators to consider when dealing with the impact of natural hazards specifically on immovable cultural heritage.

The paper contributes to a better understanding of place-based vulnerability with local mapping dimension also considering future threats posed by climate change. The results highlight the danger at which the SCs of Røldal, in case of floods, and of Ringebu, Torpo and Øye, in case of landslide, may face and stress the urgency of increasing awareness and preparedness on these potential hazards.

The contribution for the first time aims to homogeneously collect and report all together existing spread information on architectural features, conservation status and geographical attributes for the whole group of SCs by accompanying this information with as much as possible complete 2D sections collection from existing drawings and novel 3D drawn sketches created for this contribution. Then the paper contributes to a better understanding of place-based vulnerability with local mapping dimension also considering future threats posed by climate change. Then it highlights the danger of floods and landslides at which the 28 SCs are subjected. Finally it reports how these risks will change under the ongoing impact of climate change.

Prior investigations concerning misalignment resulting from journal deformation typically relied on predefined misaligned angles. Nevertheless, scant attention has been devoted to the determination of these misaligned angles. Furthermore, existing studies commonly treat the journal as rigid under such circumstances. Therefore, the present study aims to introduce a framework for determining misaligned angles and to compare outcomes between rigid and flexible journal configurations.

The bearing forces are considered as an external load leading to journal deformation. This deformation is calculated using the finite element method. The pressure distribution producing the bearing force is solved using the finite difference method. The mesh grids in the finite element and finite difference methods are matched for coupling calculation. By iteration, the pressure distribution of the lubricant film at the equilibrium position is determined.

Results show that the deformation-induced misalignment has a significant influence on the performance of the bearing when the journal flexibility is taken into account. The parametric study reveals that the misalignment relies on system parameters such as bearing length-diameter ratio and static load.

The investigation of this work provides a quantification method of misalignment of hydrodynamic bearings considering the elastic deformation of the journal, which assists in the design of bearing in a rotor-bearing system.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-10-2023-0337/

Nearly 75% of EU buildings are not energy-efficient enough to meet the international climate goals, which triggers the need to develop sustainable construction techniques with high degree of resilience against climate change. In this context, a promising construction technique is represented by ventilated façades (VFs). This paper aims to propose three different VFs and the authors define a novel machine learning-based approach to evaluate and predict their energy performance under different boundary conditions, without the need for expensive on-site experimentations

The approach is based on the use of machine learning algorithms for the evaluation of different VF configurations and allows for the prediction of the temperatures in the cavities and of the heat fluxes. The authors trained different regression algorithms and obtained low prediction errors, in particular for temperatures. The authors used such models to simulate the thermo-physical behavior of the VFs and determined the most energy-efficient design variant.

The authors found that regression trees allow for an accurate simulation of the thermal behavior of VFs. The authors also studied feature weights to determine the most relevant thermo-physical parameters. Finally, the authors determined the best design variant and the optimal air velocity in the cavity.

This study is unique in four main aspects: the thermo-dynamic analysis is performed under different thermal masses, positions of the cavity and geometries; the VFs are mated with a controlled ventilation system, used to parameterize the thermodynamic behavior under stepwise variations of the air inflow; temperatures and heat fluxes are predicted through machine learning models; the best configuration is determined through simulations, with no onerous in situ experimentations needed.

This study aims to explore the formation mechanism of aerodynamic noise of a high-speed maglev train and understand the characteristics of dipole and quadrupole sound sources of the maglev train at different speed levels.

Based on large eddy simulation (LES) method and Kirchhoff–Ffowcs Williams and Hawkings (K-FWH) equations, the characteristics of dipole and quadrupole sound sources of maglev trains at different speed levels were simulated and analyzed by constructing reasonable penetrable integral surface.

The spatial disturbance resulting from the separation of the boundary layer in the streamlined area of the tail car is the source of aerodynamic sound of the maglev train. The dipole sources of the train are mainly distributed around the radio terminals of the head and tail cars of the maglev train, the bottom of the arms of the streamlined parts of the head and tail cars and the nose tip area of the streamlined part of the tail car, and the quadrupole sources are mainly distributed in the wake area. When the train runs at three speed levels of 400, 500 and 600 km·h⁻¹, respectively, the radiated energy of quadrupole source is 62.4%, 63.3% and 71.7%, respectively, which exceeds that of dipole sources.

This study can help understand the aerodynamic noise characteristics generated by the high-speed maglev train and provide a reference for the optimization design of its aerodynamic shape.

Artificial Intelligence (AI) is a growing technology impacting several business fields. The agricultural sector is facing several challenges, which may be supported by the use of such a new advanced technology. The aim of the paper is to map the state-of-the-art of AI applications in agriculture, their advantages, barriers, implications and the ability to lead to new business models, depicting a future research agenda.

A structured literature review has been conducted, and 37 contributions have been analyzed and coded using a detailed research framework.

Findings underline the multiple uses and advantages of AI in agriculture and the potential impacts for farmers and entrepreneurs, even from a sustainability perspective. Several applications and algorithms are being developed and tested, but many barriers arise, starting from the lack of understanding by farmers and the need for global investments. A collaboration between scholars and practitioners is advocated to share best practices and lead to practical solutions and policies. The promising topic of new business models is still under-investigated and deserves more attention from scholars and practitioners.

The paper reports the state-of-the-art of AI in agriculture and its impact on the development of new business models. Several new research avenues have been identified.

The purpose of this paper is to review cases of artificial reefs built through additive manufacturing (AM) technologies and analyse their ecological goals, fabrication process, materials, structural design features and implementation location to determine predominant parameters, environmental impacts, advantages, and limitations.

The review analysed 16 cases of artificial reefs from both temperate and tropical regions. These were categorised based on the AM process used, the mortar material used (crucial for biological applications), the structural design features and the location of implementation. These parameters are assessed to determine how effectively the designs meet the stipulated ecological goals, how AM technologies demonstrate their potential in comparison to conventional methods and the preference locations of these implementations.

The overview revealed that the dominant artificial reef implementation occurs in the Mediterranean and Atlantic Seas, both accounting for 24%. The remaining cases were in the Australian Sea (20%), the South Asia Sea (12%), the Persian Gulf and the Pacific Ocean, both with 8%, and the Indian Sea with 4% of all the cases studied. It was concluded that fused filament fabrication, binder jetting and material extrusion represent the main AM processes used to build artificial reefs. Cementitious materials, ceramics, polymers and geopolymer formulations were used, incorporating aggregates from mineral residues, biological wastes and pozzolan materials, to reduce environmental impacts, promote the circular economy and be more beneficial for marine ecosystems. The evaluation ranking assessed how well their design and materials align with their ecological goals, demonstrating that five cases were ranked with high effectiveness, ten projects with moderate effectiveness and one case with low effectiveness.

AM represents an innovative method for marine restoration and management. It offers a rapid prototyping technique for design validation and enables the creation of highly complex shapes for habitat diversification while incorporating a diverse range of materials to benefit environmental and marine species’ habitats.