Search results

The main aim of this study is to characterise and identify specific chemo-sensory profiles of ciders from the Canary Islands (Spain).

Commercial samples of Canary ciders were compared to ciders from the Basque Country and Asturias. In total, 18 samples were studied, six for each region. The analysis comprised their sensory profiling and chemical characterisation of their polyphenolic profile, volatile composition, conventional chemical parameters and CIELAB colour coordinates. In parallel, the sensory profile of the samples from the Canary Islands was first compared with their Basque and Asturian counterparts by labelled sorting task. Then, their specific aroma profile was characterised by flash profile. Further quantification of sensory-active compounds was performed by GC–MS and GC-FID to identify the volatile compounds involved in their aroma profile.

Results show that Canary ciders present a specific chemical profile characterised by higher levels of ethanol, and hydroxycinnamic acids, mainly t-ferulic, t-coumaric and neochologenic acids, and lower levels of volatile and total acidity than their Asturian and Basque counterparts. They also present a specific aroma profile characterised by fruity aroma, mainly fruit in syrup and confectionary, and sweet flavours related to their highest levels of vinylphenols formed by transformation of hydroxycinnamic acids.

An integrated strategy to explore the typicity of the currently existing Canary ciders in the market was developed. The results are important in that they will help other regions to identify specific typical chemo-sensory profiles and to promote the creation of certifications supporting regional typicity.

The purpose of this study is to explore numerical scrutinization of micropolar and Walters-B non-Newtonian fluids motion under the influence of thermal radiation and chemical reaction.

The two fluids micropolar and Walters-B liquid are considered to start flowing from the slot to the stretching sheet. A magnetic field of constant strength is imposed on their flow transversely. The problems on heat and mass transport are set up with thermal, chemical reaction, heat generation, etc. to form partial differential equations. These equations were simplified into a dimensionless form and solved using spectral homotopy analysis method (SHAM). SHAM uses the basic concept of both Chebyshev pseudospectral method and homotopy analysis method to obtain numerical computations of the problem.

The outcomes for encountered flow parameters for temperature, velocity and concentration are presented with the aid of figures. It is observed that both the velocity and angular velocity of micropolar and Walters-B and thermal boundary layers increase with increase in the thermal radiation parameter. The decrease in velocity and decrease in angular velocity occurred are a result of increase in chemical reaction. It is hoped that the present study will enhance the understanding of boundary layer flow of micropolar and Walters-B non-Newtonian fluid under the influences of thermal radiation, thermal conductivity and chemical reaction as applied in various engineering processes.

All results are presented graphically and all physical quantities are computed and tabulated.

This study aims to examine the blockchain landscape in supply chain management by drawing insights from academic and industry literature. It identifies the key drivers, categorizes the products involved and highlights the business values achieved by early adopters of blockchain technology within the supply chain domain. Additionally, it explores fingerprinting techniques to establish a robust connection between physical products and the blockchain ledger.

The authors combined the interpretive sensemaking systematic literature review to offer insights into how organizations interpreted their business challenges and adopted blockchain technology in their specific supply chain context; content analysis (using Leximancer automated text mining software) for concept mapping visualization, facilitating the identification of key themes, trends and relationships, and qualitative thematic analysis (NVivo) for data organization, coding and enhancing the depth and efficiency of analysis.

The findings highlight the transformative potential of blockchain technology and offer valuable insights into its implementation in optimizing supply chain operations. Furthermore, it emphasizes the importance of product provenance information to consumers, with blockchain technology offering certainty and increasing customer loyalty toward brands that prioritize transparency.

This research has several limitations that should be acknowledged. First, there is a possibility that some relevant investigations may have been missed or omitted, which could impact the findings. In addition, the limited availability of literature on blockchain adoption in supply chains may restrict the scope of the conclusions. The evolving nature of blockchain adoption in supply chains also poses a limitation. As the technology is in its infancy, the authors expect that a rapidly emerging body of literature will provide more extensive evidence-based general conclusions in the future. Another limitation is the lack of information contrasting academic and industry research, which could have provided more balanced insights into the technology’s advancement. The authors attributed this limitation to the narrow collaborations between academia and industry in the field of blockchain for supply chain management.

Practitioners recognize the potential of blockchain in addressing industry-specific challenges, such as ensuring transparency and data provenance. Understanding the benefits achieved by early adopters can serve as a starting point for companies considering blockchain adoption. Blockchain technology can verify product origin, enable truthful certifications and comply with established standards, reinforcing trust among stakeholders and customers. Thus, implementing blockchain solutions can enhance brand reputation and consumer confidence by ensuring product authenticity and quality. Based on the results, companies can align their strategies and initiatives with their needs and expectations.

In essence, the integration of blockchain technology within supply chain provenance initiatives not only influences economic aspects but also brings substantial social impacts by reinforcing consumer trust, encouraging sustainable and ethical practices, combating product counterfeiting, empowering stakeholders and contributing to a more responsible, transparent and progressive socioeconomic environment.

This study consolidates current knowledge on blockchain’s capacity and identifies the specific drivers and business values associated with early blockchain adoption in supply chain provenance. Furthermore, it underscores the critical role of product fingerprinting techniques in supporting blockchain for supply chain provenance, facilitating more robust and efficient supply chain operations.

Numerous metals can be processed using the additive manufacturing process laser-based powder bed fusion of metals (PBF-LB/M, ISO/ASTM 52900). The main advantages of additive manufacturing technologies are the high degree of design freedom and the cost-effective implementation of lightweight structures. This could be profitable for gears with increased power density, combining reduced mass with considerable material strength. Current research on additively manufactured gears is focused on developing lightweight structures but is seldom accompanied by simulations and even less by mechanical testing. There has been very little research into the mechanical and material properties of additively manufactured gears. The purpose of this study is to investigate the behavior of lightweight structures in additively manufactured gears under static loads.

This research identifies the static load-carrying capacity of helical gears with different lightweight structures produced by PBF-LB/M with the case hardening steel 16MnCr5. A static gear loading test rig with a maximum torque at the pinion of T₁ = 1200 Nm is used. Further focus is set on analyzing material properties such as the relative density, microstructure, hardness depth profile and chemical composition.

All additively manufactured gear variants show no failure or plastic deformation at the maximum test load. The shaft hub connection, the lightweight hub designs and the gearing itself are stable and intact regarding their form and function. The identified material characteristics are comparable to conventionally manufactured gears (wrought and machined), but also some particularities were observed.

This research demonstrates the mechanical strength of lightweight structures in gears. Future research needs to consider the dynamic load-carrying capacity of additively manufactured gears.

The aim of this study was to produce an enriched honey powder with active compounds coming from bee pollen and investigate the effects of bee pollen addition as a carrier material on honey powder.

The effects of bee pollen addition as carrier material in corporation with gum arabic at different ratios (25, 50 and 75% of total carrier material amount) on vacuum-dried honey-bee pollen powder were investigated.

The bee pollen concentration raise in the mixture increased the particle size, total phenolic, flavonoid and sugar contents and antioxidant activity, whereas decreased the Hauser ratio and Carr index values, hygroscopicity and solubility of enriched honey powder samples. The honey powder samples had passable and poor flow properties and very hygroscopic (>20%) structure because of the high sugar content. The phenolic and flavonoid contents of honey powder samples with bee pollen changed between 1531.59 and 3796.00 mg GAE/kg and 424.05–1203.10 mg QE/kg, respectively, and these values were much higher than the control sample. On the basis of linear correlation analysis, there was a very high positive correlation between total phenolic, flavonoid and antioxidant activity, while there was a very high negative correlation between these parameters and solubility.

The study evaluated that enriching of honey powders with pollen, which is a product of both plant and bee origin, rather than enriching with different plant and animal sources has an innovative approach. Additionally, the usage of bee pollen as a carrier agent in food drying has not been previously reported in any study.

This Friction stir welding study aims to weld thick AA8011 aluminium plates, and the interface joints created with a variety of tool pin profiles were examined for their effects on the welding process.

Scanning electron microscopy and optical microscopy and X-ray diffraction were used to examine the macro and micro-structural characteristics, as well as the fracture surfaces, of tensile specimens. The mechanical properties (tensile, hardness tests) of the base metal and the welded specimens under a variety of situations being tested. Additionally, a fracture toughness test was used to analyse the resilience of the base metal and the best weldments to crack formation. Using a response surface methodology with a Box–Behnken design, the optimum values for the three key parameters (rotational speed, welding speed and tool pin profile) positively affecting the weld quality were established.

The results demonstrate that a defect-free junction can be obtained by using a cylindrical tool pin profile, increasing the rotational speed while decreasing the welding speeds. The high temperature and compressive residual stress generated during welding leads to the increase in grain size. The grain size of the welded zone for optimal conditions is significantly smaller and the hardness of the stir zone is higher than the other experimental run parameters.

The work focuses on the careful examination of microstructures behaviour under various tool pin profile responsible for the change in mechanical properties. The mathematical model generated using Taguchi approach and parameters was optimized by using multi-objectives response surface methodology techniques.

This study aims to investigate unripe carob pod as a source of antioxidant molecules useful in the eco-friendly synthesis of a gelatin conjugate. This one was involved in the preparation of gummies able to produce remarkable human health benefits.

Eco-friendly strategies (ultrasound-assisted extraction, low temperatures and eco-friendly solvents) were employed in the extraction of active molecules. Antioxidant molecules were involved in the grafting reaction with gelatin chains (ascorbic acid/hydrogen peroxide couple as initiator system). Gelatin conjugate represents a useful material able to prepare gummies with remarkable rheological and antioxidant performances over time.

Experimental results confirmed that the green approach allowed the achievement of extracts with remarkable antioxidant properties due to the presence of phenolic moieties. Gelatin conjugate synthesis preserved these functionalities, usefully exploited in the preparation of gummies with significant structural and biological features.

Compared to the literature data the preparation of the gummies with outstanding biological properties was performed by employing functional gelatin synthesized by an eco-friendly approach.

World imports of Italian sparkling wines fell by 9% in value and 5% in quantities. In view of this, the quality characterisation of these products is desirable to increase their market value and restore their global visibility.

For this purpose, in this paper, heavy metals (Cd, Co, Cr, Cu, Fe, Ga, Hf, Hg, Mn, Mo, Nb, Ni, Pb, Re, Sb, Sn, Ta, Th, Tl, U, W, V, Zn, Zr), rare Earth elements (REEs) (Ce, Dy, Er, Eu, Gd, Ho, La, Lu, Nd, Pr, Sm, Tb, Tm, Yb) and isotopes ratio (208Pb/206Pb, 207Pb/206Pb, 206Pb/204Pb, 208Pb/207Pb, 87Sr/86Sr) were analysed in Italian sparkling wines with Protected Designation of Origin (PDO) certification by High Resolution Inductively Coupled Plasma Mass Spectrometry (HR-ICP-MS) and MultiCollector Inductively Coupled Plasma Mass Spectrometer (MC-ICP-MS). The samples were produced in the Veneto region, and they were compared to white and red wines from the same area.

Sparkling wines present a characteristic elemental pattern compared to white and red ones, with lower content of heavy metals and higher content in REEs. The ratio 87Sr/86Sr resulted in a powerful micro-scale geographical origins marker while Pb ratios as winemaking process one, both useful to prevent possible frauds. Multivariate data analyses, such as PCA and PLS-DA, were used to develop a model of recognition of Venetian sparkling wines.

The good classification of sparkling wines was achieved (95%), proving the suitable use of these analytes as markers for recognising sparkling wines and their geographical origin verification. To the best of the authors’ knowledge, this is the first study investigating heavy metals, REEs and isotopes in Venetian sparkling wine for their recognition.

This study aims to systematically review the health risk assessment of the concentration of heavy metals in Pistacia species globally.

The authors systematically searched PubMed, Science Direct, Scopus and Google Scholar to identify all articles published between 1 January 2002 and 20 August 2022. A total of 33 studies met the authors’ inclusion criteria, and their data were extracted. Additionally, the potential risk to human health was assessed by calculating the target hazard quotient and hazard index for both child and adult consumers.

The estimated daily intake for heavy metals in the included studies ranged from 9.72 × 10^–9 to 7.35 (mg/day) in the following order: zinc (Zn) > mercury (Hg) > iron (Fe) > lead (Pb) > copper (Cu) > aluminum (Al) > nickel (Ni) > chromium (Cr) > manganese (Mn) > cadmium (Cd) > arsenic (As) > selenium (Se) > cobalt (Co). Among the studies that investigated heavy metals in Pistacia species around the world, the non-carcinogenic risk for all species of Pistacia was determined to be less than 1, except for Pb and Hg in Pistacia lentiscus.

The soil near the industrial area contained excessive amounts of heavy metals, which led to the transfer of heavy metals to plants. Owing to the insufficiency of the number of studies that examined heavy metals in Pistacia species, further monitoring and investigations were recommended.