Search results

Tandem wing aircrafts belong to an unconventional configurations group, and this type of design is characterised by a strong aerodynamic coupling, which results in lower induced drag. The purpose of this paper is to determine whether a certain trend in the wingspan impact on aircraft dynamic stability can be identified. The secondary goal was to compare the response to control of flaps placed on a front and rear wing.

The aerodynamic data and control derivatives were obtained from the computational fluid dynamics computations performed by the MGAERO software. The equations of aircraft longitudinal motion in a state space form were used. The equations were built based on the aerodynamic coefficients, stability and control derivatives. The analysis of the dynamic stability was done in the MATLAB by solving the eigenvalue problem. The response to control was computed by the step response method using MATLAB.

The results of this study showed that because of a strong aerodynamic coupling, a nonlinear relation between the wing size and aircraft dynamic stability proprieties was observed. In the case of the flap deflection, stronger oscillation was observed for the front flap.

Results of dynamic stability of aircraft in the tandem wing configuration can be found in the literature, but those studies show outcomes of a single configuration, while this paper presents a comprehensive investigation into the impact of wingspan on aircraft dynamic stability. The results reveal that because of a strong aerodynamic coupling, the relation between the span factor and dynamic stability is nonlinear. Also, it has been demonstrated that the configuration of two wings with the same span is not the optimal one from the aerodynamic point of view.

This study aims to examine the symmetric and asymmetric impact of external debt on inflation in Sudan from 1970 to 2020 within a multivariate framework by including money supply and the nominal effective exchange rate as additional inflation determinants.

The authors utilize an Auto Regressive Distributed Lag (ARDL) model to examine the symmetric impact of external debt on inflation, while the asymmetric impact is examined using a Nonlinear ARDL (NARDL) model. The existence of a long-run relationship between inflation and external debt is tested using the bounds-testing approach to cointegration, and a vector error-correction model is estimated to determine the short parameters of equilibrium dynamics.

The linear ARDL model results show that external debt has no statistically significant impact on inflation in the long run. On the contrary, the results of the NARDL model show that positive and negative external debt shocks statistically affect inflation in the long run. The estimated long-run elasticity coefficients of the linear and nonlinear ARDL models reveal that the domestic money supply has a statistically significant positive impact on inflation. In contrast, the nominal effective exchange rate has a statistically significant negative impact on inflation.

The reliance on symmetric analysis may not be sufficient to uncover the existence of a linkage between external debt and inflation. Proper external debt management is crucial to control inflation rates in Sudan.

To date, no empirical study has assessed the external debt-inflation nexus and its potential asymmetry in Sudan, and the current study aims to fill this gap in the literature.

Environmental degradation resulting from human activities may adversely affect human health in multiple ways. Until now, policies aimed at mitigating environmental problems such as climate change, environmental pollution and damage to biodiversity have failed to clearly identify and drive the potential benefits of these policies on health. The conducted study assesses and demonstrates how specific environmental policies and instruments influence perceived human health in order to ensure input for a data-driven decision process.

The study was conducted for the 2004–2020 period in European Union (EU) countries with the use of dynamic panel data modeling. Verification of specific policies' impact on dependent variables allows to indicate this their effectiveness and importance. As a result of the computed dynamic panel data models, it has been confirmed that a number of significant and meaningful relationships between the self-perceived health index and environmental variables can be identified.

There is a strong positive impact of environmental taxation on the health index, and the strength of this relationship causes effects to be observed in the very short term, even the following year. In addition, the development of renewable energy sources (RES) and the elimination of fossil fuels from the energy mix exert positive, although milder, effects on health. The reduction of ammonia emissions from agriculture and reducing noise pollution are other health-supporting factors that have been shown to be statistically valid. Results allow to identify the most efficient policies in the analyzed area in order to introduce those with the best results or a mix of such measures.

The results of the authors' research clearly indicate the health benefits of measures primarily aimed at improving environmental factors, such as environmental taxes in general. The authors have also discovered an unexpected negative impact of an increase in the share of energy taxes in total taxes on the health index. The presented study opens several possibilities for further investigation, especially in the context of the rapidly changing geopolitical environment and global efforts to respond to environmental and health challenges. The authors believe that the outcome of the authors' study may provide new arguments to policymakers pursuing solutions that are not always easily acceptable by the public.

The purpose of this review is to comprehensively consider the material properties and processing of additive titanium alloy and provide a new perspective for the robotic grinding and polishing of additive titanium alloy blades to ensure the surface integrity and machining accuracy of the blades.

At present, robot grinding and polishing are mainstream processing methods in blade automatic processing. This review systematically summarizes the processing characteristics and processing methods of additive manufacturing (AM) titanium alloy blades. On the one hand, the unique manufacturing process and thermal effect of AM have created the unique processing characteristics of additive titanium alloy blades. On the other hand, the robot grinding and polishing process needs to incorporate the material removal model into the traditional processing flow according to the processing characteristics of the additive titanium alloy.

Robot belt grinding can solve the processing problem of additive titanium alloy blades. The complex surface of the blade generates a robot grinding trajectory through trajectory planning. The trajectory planning of the robot profoundly affects the machining accuracy and surface quality of the blade. Subsequent research is needed to solve the problems of high machining accuracy of blade profiles, complex surface material removal models and uneven distribution of blade machining allowance. In the process parameters of the robot, the grinding parameters, trajectory planning and error compensation affect the surface quality of the blade through the material removal method, grinding force and grinding temperature. The machining accuracy of the blade surface is affected by robot vibration and stiffness.

This review systematically summarizes the processing characteristics and processing methods of aviation titanium alloy blades manufactured by AM. Combined with the material properties of additive titanium alloy, it provides a new idea for robot grinding and polishing of aviation titanium alloy blades manufactured by AM.

The aim of this paper is to investigate whether a Nash equilibrium of a two-country trading economy is symmetry-breaking or not.

The approach to tackle this topic is a theoretical treatment by the general equilibrium trade theory and game theory.

If each government's domestic policy serving private production is diminishing to the private production scale, the Nash equilibrium is not symmetry-breaking.

In the existing study of Chatterjee (2017), a similar result is derived by focusing on the properties of each country's GDP function. The authors, however, consider an economy where each country's PPF is strictly concave and show that the Nash equilibrium uniquely exists and this equilibrium is symmetry.

Traditional level inverter technology has drawbacks in the aspect of Total harmonic distortion (THD) and switching losses for higher frequencies. Due to these drawbacks, two-level inverters have become unprofitable for high-power applications. Multilevel inverters (MLIs) are used to enhance the output waveform characteristics (i.e. low THD) and to offer various inverter topologies and switching methods.

MLIs are upgraded versions of two-level inverters that offer more output levels in current and voltage waveforms while lowering the dv/dt and di/dt ratios. This paper aims to review and compare the different topologies of MLI used in high-power applications. Single and multisource MLI's working principal and switching states for each topology are demonstrated and compared. A Simulink model system integrated using detailed circuit simulations in developed in MATLAB®–Simulink program. In this system, a constant voltage source connected to MLI to feed asynchronous motor with squirrel cage rotor type is used to demonstrate the efficacy of the MLI under different varying speed and torque conditions.

MLI has presented better control and good range of system parameters than two-level inverter. It is suggested that the MLIs like cascade-five-level and NPC-five-level have shown low current harmonics of around 0.43% and 1.87%, respectively, compared to two-level inverter showing 5.82%.

This study is the first of its kind comparing the different topologies of single and multisource MLIs. This study suggests that the MLIs are more suitable for high-power applications.

The safety and reliability of high-speed trains rely on the structural integrity of their components and the dynamic performance of the entire vehicle system. This paper aims to define and substantiate the assessment of the structural integrity and dynamical integrity of high-speed trains in both theory and practice. The key principles and approaches will be proposed, and their applications to high-speed trains in China will be presented.

First, the structural integrity and dynamical integrity of high-speed trains are defined, and their relationship is introduced. Then, the principles for assessing the structural integrity of structural and dynamical components are presented and practical examples of gearboxes and dampers are provided. Finally, the principles and approaches for assessing the dynamical integrity of high-speed trains are presented and a novel operational assessment method is further presented.

Vehicle system dynamics is the core of the proposed framework that provides the loads and vibrations on train components and the dynamic performance of the entire vehicle system. For assessing the structural integrity of structural components, an open-loop analysis considering both normal and abnormal vehicle conditions is needed. For assessing the structural integrity of dynamical components, a closed-loop analysis involving the influence of wear and degradation on vehicle system dynamics is needed. The analysis of vehicle system dynamics should follow the principles of complete objects, conditions and indices. Numerical, experimental and operational approaches should be combined to achieve effective assessments.

The practical applications demonstrate that assessing the structural integrity and dynamical integrity of high-speed trains can support better control of critical defects, better lifespan management of train components and better maintenance decision-making for high-speed trains.

This work analyzes, through social-environmental reports, whether banks with higher transparency in social-environmental policies better safeguard financial stability in Brazil.

The analysis is carried out through a panel database analysis of the 42 largest Brazilian banks, representing 98% of the Brazilian financial system. Seeking to avoid spurious results, we followed rigorous methodological standards. Hence, we conducted an empirical analysis using a dynamic panel data model, we used the difference generalized method of moments (D-GMM) and the system generalized method of moments (S-GMM).

The results show that the higher the transparency of social-environmental policies, the lower the chance of possible stress on the financial stability of Brazilian banks. In sum, this study builds evidence that disclosing risks related to policies about sustainability can enhance financial stability. It is essential to highlight that social-environmental transparency does not have as direct objective financial stability.

The manuscript submitted represents an original work that analyzes whether banks with higher transparency in social-environmental policies better safeguard financial stability. Some countries, such as Brazil, have their potential for sustainable policies spotlighted due to their green territory and diverse natural ecosystems. Besides having green potential, Brazil is a developing country with a well-developed financial system. These characteristics make Brazil one of the best laboratories for studying the relationship between transparency in social-environmental policies and financial stability.

This article aims to investigate how institutional characteristics affect the level of financial development of economies collectively and compare between developed and undeveloped economies.

A dynamic panel with 131 countries, including developed and developing ones, was utilized; the estimators of the generalized method of moments system (GMM system) model were selected because they have econometric characteristics more suitable for analysis, providing superior statistical precision compared to traditional linear estimation methods.

The results from the full panel suggest that concrete and well-defined institutions are important for financial development, confirming previous research, with a more limited scope than the present work.

Limitations of this research include the availability of data for all countries worldwide, which would make the research broader and more complete.

A panel of countries was used, divided into developed and developing countries, to analyze the impact of institutional variables on the financial development of these countries, which is one of the differentiators of this work. Another differentiator of this research is the presentation of estimates in six different configurations, with emphasis on the GMM system model in one and two steps, allowing for comparison between results.

This paper aims to obtain the evolution law of dynamic performance of CR400BF electric multiple unit (EMU).

Using the dynamic simulation based on field test, stiffness of rotary arm nodes and damping coefficient of anti-hunting dampers were tested. Stiffness, damping coefficient, friction coefficient, track gauge were taken as random variables, the stochastic dynamics simulation method was constructed and applied to research the evolution law with running mileage of dynamic index of CR400BF EMU.

The results showed that stiffness and damping coefficient subjected to normal distribution, the mean and variance were computed and the evolution law of stiffness and damping coefficient with running mileage was obtained.

Firstly, based on the field test we found that stiffness of rotary arm nodes and damping coefficient of anti-hunting dampers subjected to normal distribution, and the evolution law of stiffness and damping coefficient with running mileage was proposed. Secondly stiffness, damping coefficient, friction coefficient, track gauge were taken as random variables, the stochastic dynamics simulation method was constructed and applied to the research to the evolution law with running mileage of dynamic index of CR400BF EMU.