Search results

The purpose of this study is to develop a novel general mathematical model to find the optimal product mix of commercial graphite products, which has a complex production process with alternative sub-processes in the graphite mining production process.

The network optimization was adopted to model the complex graphite mining production process through the optimal allocation of raw graphite, byproducts, and saleable products with comparable sub-processes, which has different processing capacities and costs. The model was tested on a selected graphite manufacturing company, and the optimal graphite product mix was determined through the selection of the optimal production process. In addition, sensitivity and scenario analyses were carried out to accommodate uncertainties and to facilitate further managerial decisions.

The selected graphite mining company mines approximately 400 metric tons of raw graphite per month to produce ten types of graphite products. According to the optimum solution obtained, the company should produce only six graphite products to maximize its total profit. In addition, the study demonstrated how to reveal optimum managerial decisions based on optimum solutions.

This study has made a significant contribution to the graphite manufacturing industry by modeling the complex graphite mining production process with a network optimization technique that has yet to be addressed at this level of detail. The sensitivity and scenario analyses support for further managerial decisions.

A circular economy (CE) is an economic system that tries to eliminate waste and continually use resources. Due to growing environmental concerns, supply chain (SC) design should be based on the CE considerations. In addition, responding and satisfying customers are the challenges managers constantly encounter. This study aims to improve the design of an agile closed-loop supply chain (CLSC) from the CE point of view.

In this research, a new multi-stage, multi-product and multi-period design of a CLSC network under uncertainty is proposed that aligns with the goals of CE and SC participants. Recycling of goods is an important part of the CLSC. Therefore, a multi-objective mixed-integer linear programming model (MILP) is proposed to formulate the problem. Besides, a robust counterpart of multi-objective MILP is offered based on robust optimization to cope with the uncertainty of parameters. Finally, the proposed model is solved using the e-constraint method.

The proposed model aims to provide the strategic choice of economic order to the suppliers and third-party logistic companies. The present study, which is carried out using a numerical example and sensitivity analysis, provides a robust model and solution methodology that are effective and applicable in CE-related problems.

This study shows how all upstream and downstream units of the SC network must work integrated to meet customer needs considering the CE context.

The main goal of the CE is to optimize resources, reduce the use of raw materials, and revitalize waste by recycling. In this study, a comprehensive model that can consider both SC design and CE necessities is developed that considers all SC participants.

Ready-mix concrete delivery problem (RMCDP), a specific version of the vehicle routing problem (VRP), is a relevant supply-chain engineering task for construction management with various formulations and solving methods. This problem can range from a simple scenario involving one source, one material and one destination to a more challenging and complex case involving multiple sources, multiple materials and multiple destinations. This paper presents an Internet of Things (IoT)-supported active building information modeling (BIM) system for optimized multi-project ready-mix concrete (RMC) delivery.

The presented system is BIM-based, IoT supported, dynamic and automatic input/output exchange to provide an optimal delivery program for multi-project ready-mix-concrete problem. The input parameters are extracted as real-time map-supported IoT data and transferred to the system via an application programming interface (API) into a mixed-integer linear programming (MILP) optimization model developed to perform the optimization. The obtained optimization results are further integrated into BIM by conventional project management tools. To demonstrate the features of the suggested system, an RMCDP example was applied to solve that included four building sites, seven eligible concrete plants and three necessary RMC mixtures.

The system provides the optimum delivery schedule for multiple RMCs to multiple construction sites, as well as the optimum RMC quantities to be delivered, the quantities from each concrete plant that must be supplied, the best delivery routes, the optimum execution times for each construction site, and the total minimal costs, while also assuring the dynamic transfer of the optimized results back into the portfolio of multiple BIM projects. The system can generate as many solutions as needed by updating the real-time input parameters in terms of change of the routes, unit prices and availability of concrete plants.

The suggested system allows dynamic adjustments during the optimization process, andis adaptable to changes in input data also considering the real-time input data. The system is based on spreadsheets, which are widely used and common tool that most stakeholders already utilize daily, while also providing the possibility to apply a more specialized tool. Based on this, the RMCDP can be solved using both conventional and advanced optimization software, enabling the system to handle even large-scale tasks as necessary.

This paper aims at developing a multi-objective mathematical model of circular economy that integrates key concept of leasing as a strategy in addition to reuse, refurbishing, primary recycling, secondary recycling and disposal.

This paper proposes multi-objective fuzzy mixed integer linear programming mathematical model considering multi-product, multi-echelon and multi-capacitated concepts of the circular economy. The three objectives of the proposed model, namely, economic, environmental and social are solved simultaneously using constraint approach to obtain balanced trade-off between the objective functions. The model is validated by solving a case study from the literature. The proposed model is made pragmatic for industrial application by considering multi-external suppliers multi-customer zones, multi-disassembly centers, multi-collection centers and multi-refurbishing centers and accounting for purchasing, processing, transportation, set-up costs and capacity constraints at the same time.

The results show that the leasing of the products improves the economic function in addition to the known environmental improvements. The proposed model also shows that the circular economy can generate the jobs for the unskilled people at different locations.

The proposed model can be further improved by considering the non-linearity due to economy of scale at various centers and in transportation. The model can be further extended to make it multi-period model.

The proposed model of circular economy can be used by the organizations as a policy tool to decide the optimum number of collection centers, disassembly centers, refurbishing centers, recycling centers and disposal centers and their optimum locations and allocations. The organizations can also trade-off among economic, environmental and social benefits of their proposed decisions in circular economy.

The originality of the proposed mathematical model is consideration of leasing as a strategy to have better control over the supply chain for circularity; considering the training of unskilled people for backward supply chain jobs and accounting for primary recycling and secondary recycling separately for economical computation.

Brief introduction on the importance and the need for plastic analysis methods were presented in the beginning section of this review. The plastic method for analysis was considered to be the more advanced method of analysis because of its ability to represent the true behaviour of the steel structures. Then in the following section, a literature analysis has been carried out on the previous investigations done on steel plates, steel beams and steel frames by other authors. The behaviour of them under different types of loading were presented and are under the investigation of innovative new analysis methods.

Structure member connections also have the potential for plastic failure. In this study, the authors have highlighted a few topics to be discussed. The three topics in this study are T-end plate connections to a square hollow section, semi-rigid connections and cold-formed steel storage racks with spine bracings using speed-lock connections. Connection is one of the important parts of a structure that ensures the integrity of the structure. Finally, in this technical paper, the authors introduce some topics related to seismic action. Application of the Theory of Plastic Mechanism Control in seismic design is studied in the beginning. At the end, its in-depth application for moment resisting frames-eccentrically braced frames dual systems is investigated.

When this study involves the design of a plastic structure, the design criteria must involve the ultimate load rather than the yield stress. As the steel behaves in the plastic range, it means the capacity of the steel has reached the ultimate load. Ultimate load design and load factor design are the methods in the range of plastic analysis. After the steel capacity has reached beyond the yield stress, it fulfills the requirement in this method. The plastic analysis method offers a consistent and logical approach to structural analysis. It provides an economical solution in terms of steel weight, as the sections designed using this method are smaller compared with elastic design methods.

The plastic method is the primary approach used in the analysis and design of statically indeterminate frame structures.

This paper aims to examine and compare extant literature on the application of multi-criteria decision-making (MCDM) techniques in humanitarian operations (HOs) and humanitarian supply chains (HSCs). It identifies the status of existing research in the field and suggests a roadmap for academicians to undertake further research in HOs and HSCs using MCDM techniques.

The paper systematically reviews the research on MCDM applications in HO and HSC domains from 2011 to 2022, as the field gained traction post-2004 Indian Ocean Tsunami phenomena. In the first step, an exhaustive search for journal articles is conducted using 48 keyword searches. To ensure quality, only those articles published in journals featuring in the first quartile of the Scimago Journal Ranking were selected. A total of 103 peer-reviewed articles were selected for the review and then segregated into different categories for analysis.

The paper highlights insufficient high-quality research in HOs that utilizes MCDM methods. It proposes a roadmap for scholars to enhance the research outcomes by advocating adopting mixed methods. The analysis of various studies revealed a notable absence of contextual reference. A contextual mind map specific to HOs has been developed to assist future research endeavors. This resource can guide researchers in determining the appropriate contextual framework for their studies.

This paper will help practitioners understand the research carried out in the field. The aspiring researchers will identify the gap in the extant research and work on future research directions.

To the best of the authors’ knowledge, this is the first literature review on applying MCDM in HOs and HSCs. It summarises the current status and proposes future research directions.

In repetitive projects, repetition offers more possibilities for activity scheduling at the sub-activity level. However, existing resource-constrained repetitive scheduling problem (RCRSP) models assume that there is only one sequence in performing the sub-activities of each activity, resulting in an inefficient resource allocation. This paper proposes a novel repetitive scheduling model for solving RCRSP with soft logic.

In this paper, a constraint programming model is developed to solve the RCRSP using soft logic, aiming at the possible relationship between parallel execution, orderly execution or partial parallel and partial orderly execution of different sub activities of the same activity in repetitive projects. The proposed model integrated crew assignment strategies and allowed continuous or fragmented execution.

When solving RCRSP, it is necessary to take soft logic into account. If managers only consider the fixed logic between sub-activities, they are likely to develop a delayed schedule. The practicality and effectiveness of the model were verified by a housing project based on eight different scenarios. The results showed that the constraint programming model outperformed its equivalent mathematical model in terms of solving speed and solution quality.

Available studies assume a fixed logic between sub-activities of the same activity in repetitive projects. However, there is no fixed construction sequence between sub-activities for some projects, e.g. hotel renovation projects. Therefore, this paper considers the soft logic relationship between sub-activities and investigates how to make the objective optimal without violating the resource availability constraint.

Advancement in optimization of VLSI circuits involves reduction in chip size from micrometer to nanometer level as well as fabrication of a billions of transistors in a single die where global routing problem remains significant with a trade-off of power dissipation and interconnect delay. This paper aims to solve the increased complexity in VLSI chip by minimization of the wire length in VLSI circuits using a new approach based on nature-inspired meta-heuristic, invasive weed optimization (IWO). Further, this paper aims to achieve maximum circuit optimization using IWO hybridized with particle swarm optimization (PSO).

This paper projects the complexities of global routing process of VLSI circuit design in mapping it with a well-known NP-complete problem, the minimum rectilinear Steiner tree (MRST) problem. IWO meta-heuristic algorithm is proposed to meet the MRST problem more efficiently and thereby reducing the overall wire-length of interconnected nodes. Further, the proposed approach is hybridized with PSO, and a comparative analysis is performed with geosteiner 5.0.1 and existing PSO technique over minimization, consistency and convergence against available benchmark.

This paper provides high performance–enhanced IWO algorithm, which keeps in generating low MRST value, thereby successful wire length reduction of VLSI circuits is significantly achieved as evident from the experimental results as compared to PSO algorithm and also generates value nearer to geosteiner 5.0.1 benchmark. Even with big VLSI instances, hybrid IWO with PSO establishes its robustness over achieving improved optimization of overall wire length of VLSI circuits.

This paper includes implications in the areas of optimization of VLSI circuit design specifically in the arena of VLSI routing and the recent developments in routing optimization using meta-heuristic algorithms.

This paper fulfills an identified need to study optimization of VLSI circuits where minimization of overall interconnected wire length in global routing plays a significant role. Use of nature-based meta-heuristics in solving the global routing problem is projected to be an alternative approach other than conventional method.

Technological advancements have benefited businesses all over the world in how they set up production lines, create new products/services and trade goods. Multinational corporations can communicate instantly with their distant operations by utilizing information technology tools and communication networks. Businesses have taken a significant shift and new factors have emerged which affect company's competitiveness. In case of resorting to an outsourcing option, a comprehensive approach for valuing the essential criteria is often missing. While specifically focusing on the decisions that have a huge impact on company's performance, it is crucial to pay close attention to the ways of selecting suppliers. The purpose of research is to choose the optimal manufacturing alternative from a set of possibilities.

The current research utilizes the Delphi technique for collection of vital criteria such as “quality”, “cost”, “delivery”, “warranties and claims”, “supplier profile”, “relationship and communication” and their respective sub-criteria. The purpose of research is to choose the optimal manufacturing alternative from a set of possibilities. In this regard, Analytical Hierarchy Process (AHP) technique is employed.

The current research enlightens that outsourcing can yield promising beneficial results. The results highlighted that in Hi-tech public sector organizations, international alternative is found best in almost all criteria especially in vital criteria such as “Quality”, “Cost”, “Delivery”, “Supplier Profile,” etc. Similarly, in case the outsourcing is done to a Domestic alternative, still the Domestic alternative is found effective in comparison to in-house manufacturing setups. The research showed unexpected results. Because previously it was assumed that in-house manufacturing would be more beneficial. However, the current findings support the “NASA” strategy which moved toward outsourcing to private sector.

Limitations of the proposed methodology also produce opportunities for further exploration of the topic. One key limitation of the research described in this study is that the parameters and their sub-parameters interdependency were not taken under consideration. This means that quality and cost are not dependent upon each other. However, in reality quality and cost are interlinked. This means if quality is increased, cost is also increased. Similarly, for products having zero percent of re-claim, the product would have to be manufactured with high quality.

The study is advantageous for both suppliers and purchasers, in any type of businesses where decision-making problem are under consideration. This model aids suppliers in revealing, how they can expand their profile, by focusing on the current research's selection criteria. In this way alternatives profile can now be perfected. Moreover, buyers can now rank suppliers on their quality management, financial status and other essential factors in order to conduct purchasing decisions. For the decision maker, the results illustrate which critical factors to evaluate when screening suppliers by applying current model techniques.

It is obvious that nearly almost every industry is forced to look for alternatives for all of its operations if outsourcing is an option. The study's findings have major benefits for all industries with an important role in manufacturing and supply chain operations. These objectives will serve the industries well and they will be able to prioritize their alternative selection criteria based on their operations. The findings of this study can assist any organization in their selection of vendors by providing a more detailed explanation of the impact that various criteria have on the decision-making process.

To the best of authors' knowledge, no previous study has used two approaches (AHP and Delphi study) to propose a model for making manufacturing decisions with domestic, in house and international alternatives in Hi-tech public sector organizations. The model not only benefits the manufacturers for choosing suitable suppliers but also aids suppliers to build their profile in an improved fashion by focusing on the vital attributes. This research benefits managers to improve their ability to make effective purchasing decisions, and also opens new avenues for researchers to further explore such findings in other areas as well.

Due to the importance of quality to customers, this study considers criteria of quality and profit and optimizes both in a multi-echelon cold chain of perishable agricultural products whose quality immediately begins to deteriorate after harvest. The two objectives of the proposed cold chain are to maximize profit and quality. Since postharvest quality loss in the supply chain depends on various decisions and factors, in addition to strategic decisions, the authors consider the temperature setting in refrigerated facilities and transportation vehicles due to the unfixed shelf life of the products which is related to the temperature found by Arrhenius formula.

The authors use bi-objective mixed-integer nonlinear programming to design a four-echelon supply chain. The authors integrate the supply chain echelons to detect the sources and factors of quality loss. The four echelons include supply, processing, storage and customer. The decisions, including facility location, assigning nodes of each echelon to corresponding nodes from the adjacent echelon, allocation of vehicles to transport the products from farms to wholesalers, processing selection, and temperature setting in refrigerated facilities, are made in an integrated way. Model verification and validation in the case study are done based on three perishable herbal plants.

The model obtains a 29% profit against a total cost of 71 and 93% of original quality of the crops is maintained, indicating a 7% quality loss. The final quality of 93% is the result of making a US$6m investment in the supply chain, including the procurement of high-quality raw materials; facility establishment; high-speed, high-capacity vehicles; location assignment; processing selection and refrigeration equipment in the storage and transportation systems, helping to maximize both the final quality of the products and the total profit.

The proposed supply chain model should help managers with modeling decisions, especially when it comes to cold chains for agricultural products. The model yields these results – optimal location-allocation decisions for the facilities to minimize distances between the network nodes, which save time and maintain the majority of the products’ original quality; choosing the most appropriate processing method, which reduces the perishability rate; providing high-capacity, high-speed vehicles in the logistics system, which minimizes transportation costs and maximizes the quality; and setting the right temperature in the refrigerated facilities, which mitigates the postharvest decay reaction rate of the products.

Comparison of the results of the present research with those of the traditional chain (obtained through experts) shows that since the designed chain increases the profit as well as the final quality, it has benefits for the main chain stakeholders, which are customers of agricultural products. This study model is expected to have a positive impact on the environment by placing strong emphasis on quality and preventing excessive waste generation and air pollution by imposing a financial penalty on extra demand production.

Since profit and quality of the final product are two important factors in all cultures and communities, the proposed supply chain model can be used in any food industry around the world. Applying the proposed model induces growth in local industries and promotes the culture of prioritizing quality in societies.

To the best of the authors’ knowledge, this is the first research on a bi-objective four-echelon (supply, processing, storage and customer) postharvest supply chain for agricultural products including that integrates transportation logistics and considers the deterioration rate of products as a time-dependent variable at different levels of decision-making.