Search results

Intuitionistic linguistic fuzzy information (ILFI), characterized by linguistic terms and intuitionistic fuzzy sets (IFSs), can easily express the fuzzy information in the process of muticriteria decision making (MCDM) and muticriteria group decision making (MCGDM) problems. The purpose of this paper is to provide an overview of aggregation operators (AOs) and applications of ILFI.

First, some meaningful AOs for ILFI are summarized, and some extended MCDM approaches for intuitionistic uncertain linguistic variables (IULVs), such as extended TOPSIS, extended TODIM, extended VIKOR, are discussed. Then, the authors summarize and analyze the applications about the AOs of IULVs.

IULVs, characterized by linguistic terms and IFSs, can more detailed and comprehensively express the criteria values in the process of MCDM and MCGDM. Therefore, lots of researchers pay more and more attention to the MCDM or MCGDM methods with IULVs.

The authors summarize and analyze the applications about the AOs of IULVs Finally, the authors point out some possible directions for future research.

The purpose of this paper is to investigate the design method of partial observer canonical form (POCF), which is one of the important research tools for industrial plants.

Motivated by the two-steps method proposed in Xu et al. (2020), this paper extends this method to the case of Multi-Input Multi-Output (MIMO) nonlinear system. It decomposes the original system into two subsystems by observable decomposition theorem first and then transforms the observable subsystem into OCF. Furthermore, the necessary and sufficient conditions for the existing of POCF are proved.

The proposed method has a wide range of applications including completely observable nonlinear system, noncompletely observable nonlinear system, autonomous nonlinear system and forced nonlinear system. Besides, comparing to the existing results (Saadi et al., 2016), the method requires less verified conditions.

The new method concerning design POCF has better plants compatibility and less validation conditions.

The purposes of this research are to study the theory and method of multi-attribute index system design and establish a set of systematic, standardized, scientific index systems for the design optimization and inspection process. The research may form the basis for a rational, comprehensive evaluation and provide the most effective way of improving the quality of management decision-making. It is of practical significance to improve the rationality and reliability of the index system and provide standardized, scientific reference standards and theoretical guidance for the design and construction of the index system.

Using modern methods such as complex networks and machine learning, a system for the quality diagnosis of index data and the classification and stratification of index systems is designed. This guarantees the quality of the index data, realizes the scientific classification and stratification of the index system, reduces the subjectivity and randomness of the design of the index system, enhances its objectivity and rationality and lays a solid foundation for the optimal design of the index system.

Based on the ideas of statistics, system theory, machine learning and data mining, the focus in the present research is on “data quality diagnosis” and “index classification and stratification” and clarifying the classification standards and data quality characteristics of index data; a data-quality diagnosis system of “data review – data cleaning – data conversion – data inspection” is established. Using a decision tree, explanatory structural model, cluster analysis, K-means clustering and other methods, classification and hierarchical method system of indicators is designed to reduce the redundancy of indicator data and improve the quality of the data used. Finally, the scientific and standardized classification and hierarchical design of the index system can be realized.

The innovative contributions and research value of the paper are reflected in three aspects. First, a method system for index data quality diagnosis is designed, and multi-source data fusion technology is adopted to ensure the quality of multi-source, heterogeneous and mixed-frequency data of the index system. The second is to design a systematic quality-inspection process for missing data based on the systematic thinking of the whole and the individual. Aiming at the accuracy, reliability, and feasibility of the patched data, a quality-inspection method of patched data based on inversion thought and a unified representation method of data fusion based on a tensor model are proposed. The third is to use the modern method of unsupervised learning to classify and stratify the index system, which reduces the subjectivity and randomness of the design of the index system and enhances its objectivity and rationality.

Vehicle fault diagnosis is a key factor in ensuring the safe and efficient operation of the railway system. Due to the numerous vehicle categories and different fault mechanisms, there is an unbalanced fault category problem. Most of the current methods to solve this problem have complex algorithm structures, low efficiency and require prior knowledge. This study aims to propose a new method which has a simple structure and does not require any prior knowledge to achieve a fast diagnosis of unbalanced vehicle faults.

This study proposes a novel K-means with feature learning based on the feature learning K-means-improved cluster-centers selection (FKM-ICS) method, which includes the ICS and the FKM. Specifically, this study defines cluster centers approximation to select the initialized cluster centers in the ICS. This study uses improved term frequency-inverse document frequency to measure and adjust the feature word weights in each cluster, retaining the top τ feature words with the highest weight in each cluster and perform the clustering process again in the FKM. With the FKM-ICS method, clustering performance for unbalanced vehicle fault diagnosis can be significantly enhanced.

This study finds that the FKM-ICS can achieve a fast diagnosis of vehicle faults on the vehicle fault text (VFT) data set from a railway station in the 2017 (VFT) data set. The experimental results on VFT indicate the proposed method in this paper, outperforms several state-of-the-art methods.

This is the first effort to address the vehicle fault diagnostic problem and the proposed method performs effectively and efficiently. The ICS enables the FKM-ICS method to exclude the effect of outliers, solves the disadvantages of the fault text data contained a certain amount of noisy data, which effectively enhanced the method stability. The FKM enhances the distribution of feature words that discriminate between different fault categories and reduces the number of feature words to make the FKM-ICS method faster and better cluster for unbalanced vehicle fault diagnostic.

In the past few years, millions of people started to acquire knowledge from the Massive Open Online Courses (MOOCs). MOOCs contain massive video courses produced by instructors, and learners all over the world can get access to these courses via the internet. However, faced with massive courses, learners often waste much time finding courses they like. This paper aims to explore the problem that how to make accurate personalized recommendations for MOOC users.

This paper proposes a multi-attribute weight algorithm based on collaborative filtering (CF) to select a recommendation set of courses for target MOOC users.

The recall of the proposed algorithm in this paper is higher than both the traditional CF and a CF-based algorithm – uncertain neighbors’ collaborative filtering recommendation algorithm. The higher the recall is, the more accurate the recommendation result is.

This paper reflects the target users’ preferences for the first time by calculating separately the weight of the attributes and the weight of attribute values of the courses.

This paper presents a critical review of the economic network analysis methods and their applications to maritime transport. A network can be presented in terms of its structure, topology, characteristics as well as the connectivity with different measures such as density, degree distribution, centrality (degree, betweenness, closeness, eigenvector and strength), clustering coefficient, average shortest path length and assortative. Various models such as the random graph model, block model, and ERGM can be used to analyse and explore the formation of a network and interaction between nodes. The review of the existing theories and models has found that, while these models are rather computationally intensive, they are based on some rather restrictive assumption on network formation and relationship between ports in the network at the local and global levels that require further investigation. Based on the review, a conceptual framework for maritime transport network research is developed, and the applications for future research are also discussed.

This paper presents a critical review of the economic network analysis methods and their applications to maritime transport. A network can be presented in terms of its structure, topology, characteristics as well as the connectivity with different measures such as density, degree distribution, centrality (degree, betweenness, closeness, eigenvector and strength), clustering coefficient, average shortest path length and assortative. Various models such as the random graph model, block model, and ERGM can be used to analyse and explore the formation of a network and interaction between nodes. The review of the existing theories and models has found that, while these models are rather computationally intensive, they are based on some rather restrictive assumption on network formation and relationship between ports in the network at the local and global levels that require further investigation. Based on the review, a conceptual framework for maritime transport network research is developed, and the applications for future research are also discussed.

This study aims to propose a centralized optimal control model for automated left-turn platoon at contraflow left-turn lane (CLL) intersections.

The lateral lane change control and the longitudinal acceleration in the control horizon are optimized simultaneously with the objective of maximizing traffic efficiency and smoothness. The proposed model is cast into a mixed-integer linear programming problem and then solved by the branch-and-bound technique.

The proposed model has a promising control effect under different geometric controlled conditions. Moreover, the proposed model performs robustly under various safety time headways, lengths of the CLL and green times of the main signal.

This study proposed a centralized optimal control model for automated left-turn platoon at CLL intersections. The lateral lane change control and the longitudinal acceleration in the control horizon are optimized simultaneously with the objective of maximizing traffic efficiency and smoothness

Forecasts of commodity prices are vital issues to market participants and policy makers. Those of corn are of no exception, considering its strategic importance. In the present study, the authors assess the forecast problem for the weekly wholesale price index of yellow corn in China during January 1, 2010–January 10, 2020 period.

The authors employ the nonlinear auto-regressive neural network as the forecast tool and evaluate forecast performance of different model settings over algorithms, delays, hidden neurons and data splitting ratios in arriving at the final model.

The final model is relatively simple and leads to accurate and stable results. Particularly, it generates relative root mean square errors of 1.05%, 1.08% and 1.03% for training, validation and testing, respectively.

Through the analysis, the study shows usefulness of the neural network technique for commodity price forecasts. The results might serve as technical forecasts on a standalone basis or be combined with other fundamental forecasts for perspectives of price trends and corresponding policy analysis.

To explicate the qualities of cooperation among leaders and their organizations during crisis, we studied the response to the 2013 Boston Marathon bombings. Through interviews and analysis, we discovered leaders successfully overcame obstacles that typically undermine collective crisis response. Qualitative analysis revealed five guiding behavioral principles that appeared to stimulate effective inter-agency leadership collaboration in high stakes. We draw upon concepts of collective leadership and swarm intelligence to interpret our observations and translate the findings into leader practices. We focus on replicable aspects of a meta- phenomenon, where collective action was greater than the sum of its parts; we do not evaluate individual leader behavior. Our findings provide a starting point for deeper exploration of how to bolster public safety by catalyzing enhanced inter-agency leadership behavior.