Search results

This study aims to determine the ink removal efficiency of papers with different recycling numbers and to examine some electrophotographic printing properties.

The base papers prepared according to the INGEDE 11p standard are subjected to six recycling stages (RS) under equal conditions. The physical-optical properties of the papers obtained at the end of each RS are measured and CMYK (cyan, magenta, yellow, key) color measurement scales are printed on each paper with electrophotographic printing. Color measurements of the printed papers are measured using the X-Rite eXact spectrophotometer, adhering to the ISO 13655:2017 standard. According to the measurement results of the optical properties, the ink removal efficiency of each recycling step is determined as a percentage (%) using some formulas.

As general, according to DEMLab and IERIC data, it is determined that the ink removal efficiency increased as the recycling repetition increased. In DEMf factor values, the highest deinking efficiency is obtained after the fourth RS. There is no significant difference between the printing properties of the samples.

It has been a matter of curiosity that papers lose their properties after how many RS. Many studies have been carried out on this subject and it has been presented by experimental methods that the printability properties of papers increase or decrease after which RS. This study can be a pioneer for future studies.

This research work has developed an integrated fuzzy Delphi and neutrosophic best–worst framework for selecting the sustailient (sustainable and resilient) supplier for an additive manufacturing (AM)-enabled industry.

An integrated fuzzy Delphi method (FDM) and neutrosophic best–worst method (N-BWM) approach is developed. 34 supplier evaluation criteria falling under 4 groups, that is, traditional, sustainable, resilient, and AM specific, are identified and validated using the FDM. Afterward, the weights of each criterion are measured by N-BWM. Later on, the performance evaluation is carried out to determine the best-suited supplier. Finally, sensitivity analysis is performed to know the stability and robustness of the proposed framework.

The outcome indicates the high performance of the suggested decision-making framework. The analysis reveals that supplier 4 (S4) is selected as the most appropriate for a given firm based on the FDM and N-BWM method.

The applicability of this framework is demonstrated through an industrial case of a 3D-printed trinket manufacturer. The proposed research helps AM decision-makers better understand resiliency, sustainability, and AM-related attributes. With this, the practitioners working in AM business can prioritize the supplier selection criteria.

This is the primitive study to undertake the most critical aspect of supplier selection for AM-enabled firms. Apart from this, an integrated FDM-N-BWM framework is a novel contribution to the literature on supplier selection.

This research aims to examine the factors that influence customers' product return intentions and proposes that YouTube product reviews can mitigate customers' desire to return a product.

The proposed theoretical research model and hypothesized relationship were investigated using a quantitative process. This study used 302 data from Indonesian young adult respondents to examine the structural model, which was analyzed using the SmartPLS 3.2 software package.

The results show that YouTube product reviews, product fit uncertainty and customer satisfaction are the key determinants of customers' product return intention. Furthermore, the results show that the credibility of YouTube product reviews has a major impact on customers' familiarity with a product, satisfaction and the likelihood of returning goods to sellers.

In the e-commerce industry, increasing the use of YouTube product reviews will help businesses eliminate unnecessary product returns. Sellers are also encouraged to collaborate with YouTube producers to review specific products, which can benefit companies by raising brand awareness and gaining customer feedback. Furthermore, YouTube online product reviews can help consumers avoid having an unpleasant shopping experience that causes emotional reactions and lowers satisfaction.

Most research has not considered antecedents in observing the product return phenomenon; this study observes a prerequisite of consumer product returns (i.e. information asymmetry and product familiarity) and investigates the relationships between YouTube product reviews, customer satisfaction and product return intention.

The purpose of this study is to modify the FDM 3D printer to print with polystyrene (PS) microspheres as the printing material, thus enabling bottom-up structural color printing and evaluating structural color printing.

This study chose a range of different heated bed temperatures to determine a suitable temperature for accelerating the self-assembly of photonic crystals and printing structural colors on various substrates. In addition, this study enhanced the structural color by doping PS microspheres with different contents of Acid Black 210 dye and evaluated the color-enhanced structural color by eye and spectrophotometer under different light sources.

The results show that the modified 3D printer can be used for structural color printing, and 50°C is determined as the heated bed temperature. There are significant differences in structural colors when printing under different color backgrounds and material substrates, and corresponding suitable substrates should be selected according to the application. The doping of PS microspheres with varying contents of dye results in different color levels of structural color. As with pigment colors, the visual perception of structural color varies when viewed under different light sources.

This paper proposes to print structural colors low-costly, analyze structural colors under substrate and light source conditions, and expand the structural color gamut by enhancing structural colors, which has positive implications for further research on structural colors as printing colors.

The purpose of this study is to investigate the effects of a pigment coating on the mechanical properties of fluting paper.

Two different calcium carbonate pigments were used in the preparation of the coated color, precipitated calcium carbonate (PCC) and ground calcium carbonate (GCC). Fluting paper produced by recycling waste paper was used as base paper. The effects of PCC and GCC pigments on mechanical properties were compared. Ring crush test (RCT), corrugating medium test (CMT), corrugating crush test (CCT), tensile and burst strength tests were applied to the coated papers, and the results were compared to the mechanical properties of base paper.

The tensile and burst indices of the coated papers were found to be higher than base papers about 13.9% and 6.05%, respectively. While the coating process positively affected the RCT and CCT values, it did not show a significant impact on the CMT values. GCC, one of the pigments used in coating colors, had a more effective effect on the mechanical properties of fluting papers compared to PCC.

These results suggest that coating of fluting papers has a positive effect on mechanical properties and the use of GCC as a pigment is more effective than PCC.

This study aims to identify research trends and technological evolution in the polymer three-dimensional (3D) printing process that can effectively identify the direction of technological advancement and progress of acceptance in both society and key manufacturing industries.

The Scopus database was used to collect data on polymer 3D printing papers. This study uses bibliometric approach along with network analytic techniques to identify and discuss the most important countries and their scientific collaboration, compares income groups and analyses keyword trends.

It was found that top research production results from heavy investments in research and development. The USA has the highest number of papers among the high-income countries. However, scientific production in the other two income groups is strongly dominated by China and India. Keyword analysis shows that countries with lower incomes in certain areas, such as composite and bioprinting, have fallen behind other groups over time. International collaborations were suggested as mechanisms for those countries to catch up with the current research trends. The evolution of the research field, which started with a focus on 3D printing processes and shifted to printed part designs and their applications, was discussed. The advancement of the research topic suggests that translational research on polymer 3D printing has been led mainly by research production from higher-income countries and countries with large research and development investments.

Previous studies have conducted performance analysis, science mapping and network analysis in the field of 3D printing, but none have focused on global research trends classified by country income. This study has conducted a bibliometric analysis and compared the outputs according to various income levels according to the World Bank classification.

The main purpose of this study is to provide a comprehensive review and critical insights of the application of fuzzy methods in modeling, assessing and understanding the various aspects of green and sustainable supply chains (SSCs).

The present study conducts a systematic literature review (SLR) and bibliometric analysis of 252 research articles. This study employs various tools such as VOSviewer version 1.6.10, Publish or Perish, Mendeley and Excel that aid in descriptive analysis, bibliometric analysis and network visualization. These tools have been used for performing citation analysis, top authors' analysis, co-occurrence of keywords, cluster and content analysis.

The authors have divided the literature into seven application areas and discussed detailed insights. This study has observed that research in the social sustainability area, including various issues like health and safety, labor rights, discrimination, etc. is scarce. Integration of the Industry 4.0 technologies like blockchain, big data analytics, Internet of Things (IoT) with the sustainable and green supply chain (GSC) is a promising field for future research.

The authors' contribution primarily lies in providing the integrated framework which shows the changing trends in the use of fuzzy methods in the sustainability area classifying and consolidating green and sustainable supply chain management (SSCM) literature in seven major areas where fuzzy methods are predominantly applied. These areas have been obtained after the analysis of clusters and content analysis of the literature presenting key insights from the past and developing the conceptual framework for future research studies.

This study aims to conduct performance and clustering analyses with the help of Digital Government Reference Library (DGRL) v16.6 database examining the role of emerging technologies (ETs) in public services delivery.

VOSviewer and SciMAT techniques were used for clustering and mapping the use of ETs in the public services delivery. Collecting documents from the DGRL v16.6 database, the paper uses text mining analysis for identifying key terms and trends in e-Government research regarding ETs and public services.

The analysis indicates that all ETs are strongly linked to each other, except for blockchain technologies (due to its disruptive nature), which indicate that ETs can be, therefore, seen as accumulative knowledge. In addition, on the whole, findings identify four stages in the evolution of ETs and their application to public services: the “electronic administration” stage, the “technological baseline” stage, the “managerial” stage and the “disruptive technological” stage.

The output of the present research will help to orient policymakers in the implementation and use of ETs, evaluating the influence of these technologies on public services.

The research helps researchers to track research trends and uncover new paths on ETs and its implementation in public services.

Recent research has focused on the need of implementing ETs for improving public services, which could help cities to improve the citizens’ quality of life in urban areas. This paper contributes to expanding the knowledge about ETs and its implementation in public services, identifying trends and networks in the research about these issues.

This study sought to understand which food allergen labeling systems (non-directive, semi-directive, and directive) were attended to and preferred by 34 participants with food hypersensitivity and their perceived corporate social responsibility (CSR) and behavioral intention towards a restaurant that identifies food allergens on menus.

This study used an online survey with open-ended and ranking questions, combined with eye-tracking technology, to explore participants' visual attention and design preferences regarding four menus. This study utilized one-way repeated measures analysis of variance (RM-ANOVA) and heat maps to analyze participants' menu-reading behaviors. A content analysis of survey responses and a ranking analysis of menus were conducted to understand the reasons behind consumers' preferred menu designs.

The advisory statement was not much attended to. Participants identified food allergen information significantly quicker with the directive labeling system (icons) than the other two systems, implying they were eye-catching. Semi-directive labeling system (red text) has lower visit count and was more preferred than two other systems; each labeling system has its strengths and limitations. Participants viewed restaurants that disclosed food allergen information on menus as socially responsible, and they would revisit those restaurants in the future.

This study was one of the first to explore, through use of eye-tracking technology, which food allergen labeling systems were attended to by consumers with food hypersensitivity. The use of triangulation methods strengthened the credibility of the results. The study provided empirical data to restauranteurs in the US on the values of food allergen identification on restaurant menus, although it is voluntary.

The paper aims to describe the positive and negative effects of night lights in historical sites, as well as the most salient challenges faced by the visitors of these sites and determine ways to address them. The study aims to suggest several light-and-shadow approaches and designs to enhance the experience of visiting historical sites.

This study identifies problems of nightlife in historical sites with an online international questionnaire to determine the preferences and difficulties faced by visitors of historical sites during day and night. After that Egypt was determined as a sample case of a developing country; its archaeological sites need to be improved. The main problems of historical Egyptian sites were investigated and approaches in developing historical sites with interactive lighting design were presented after an online questionnaire to the Egyptian society.

The paper shows that archaeological sites need some development, especially in their technological and lighting aspects, to overcome visitors’ low night-time interest in archaeological sites. Research has found certain limitations in the effects of constructing artificial illumination. The study provides modern sustainable solution for some light challenges in historical sites with approaches and solutions to solve it.

The results of that research could be applied in developing countries, but with larger specific studies to the historical urban locations according to the politics of the country.

The paper includes sustainable approaches in developing historical sites with technological lighting design required to enhance historical sites at night-time and make visits more interactive and interesting.

This paper presents an identified need of historical sites visitors’ to study applying modern approaches in enhancing urban historical sites.