Search results

This study aims to investigate the feasibility of proposed microgrid (MG) that comprises photovoltaic, wind turbines, battery energy storage and diesel generator to supply a residential building in Grindelwald which is chosen as the test location.

Three operational configurations were used to run the proposed MG. In the first configuration, the electric energy can be vended and procured utterly between the main-grid and MG. In the second configuration, the energy trade was performed within 15 kWh as the maximum allowable limit of energy to purchase and sell. In the third configuration, the system performance in the stand-alone operation mode was investigated. A whale optimization technique is used to determine the optimal size of MG in all proposed configurations. The cost of energy (COE) and other measures are used to evaluate the system performance.

The obtained results revealed that the first configuration is the most beneficial with COE of 0.253$/KWh and reliable 100%. Furthermore, the whale optimization algorithm is sufficiently feasible as compared to other techniques to apply in the applications of MG.

The value of the proposed research is to investigate to what extend the integration between MG and main-grid is beneficial economically and technically. As opposed to previous research studies that have focused predominantly only on the optimal size of MG.

Three-way decision (3WD) and probabilistic rough sets (PRSs) are theoretical tools capable of simulating humans' multi-level and multi-perspective thinking modes in the field of decision-making. They are proposed to assist decision-makers in better managing incomplete or imprecise information under conditions of uncertainty or fuzziness. However, it is easy to cause decision losses and the personal thresholds of decision-makers cannot be taken into account. To solve this problem, this paper combines picture fuzzy (PF) multi-granularity (MG) with 3WD and establishes the notion of PF MG 3WD.

An effective incomplete model based on PF MG 3WD is designed in this paper. First, the form of PF MG incomplete information systems (IISs) is established to reasonably record the uncertain information. On this basis, the PF conditional probability is established by using PF similarity relations, and the concept of adjustable PF MG PRSs is proposed by using the PF conditional probability to fuse data. Then, a comprehensive PF multi-attribute group decision-making (MAGDM) scheme is formed by the adjustable PF MG PRSs and the VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR) method. Finally, an actual breast cancer data set is used to reveal the validity of the constructed method.

The experimental results confirm the effectiveness of PF MG 3WD in predicting breast cancer. Compared with existing models, PF MG 3WD has better robustness and generalization performance. This is mainly due to the incomplete PF MG 3WD proposed in this paper, which effectively reduces the influence of unreasonable outliers and threshold settings.

The model employs the VIKOR method for optimal granularity selections, which takes into account both group utility maximization and individual regret minimization, while incorporating decision-makers' subjective preferences as well. This ensures that the experiment maintains higher exclusion stability and reliability, enhancing the robustness of the decision results.

The purpose of this study was to the low-temperature synthesis of cobalt-containing diopside pigments based on granulated blast furnace slag and to study the characteristics of the mineral formation processes, changes in the structure and colour indices.

Synthesis of cobalt-containing diopside pigments based was carried out by the directional formation of the mineralogical composition with the introduction of part of the components using granulated blast-furnace slag.

It has been established that the formation of the diopside phase in pigments containing blast-furnace slag as the main component proceeds at low temperatures (1,100°C–1,150 °C). The colour of diopside pigments is formed because of the isomorphic substitution of Si4+ ions for Al3+ ions and Mg2+ ions for Co2+ ions. It is expedient to add CoO in an amount of 0.9 mol (18 Wt.%) into the composition of diopside pigments based on blast-furnace slag to obtain defect-free violet glazes.

The developed diopside pigments enable obtaining of high-quality violet glazes for ceramics. The application of the obtained results can significantly reduce the consumption of traditional raw materials in the composition of silicate ceramic pigments, as well as reduce their firing temperature.

Calcium, magnesium and silicon oxides are the main components of blast-furnace slag. In addition, granulated blast furnace slag is mainly represented by the glassy phase, which determines its high activity during the firing process. These factors are prerequisites for using the blast-furnace slag as a valuable substitute for chemically pure or natural raw materials in silicate pigments and reducing their firing temperature.

The purpose of this paper was to prepare a ternary hierarchical rough particle to accelerate the anti-corrosive design for coastal concrete infrastructures.

A kind of micro-nano hydrophobic ternary microparticles was fabricated from SiO₂/halloysite nanotubes (HNTs) and recycled concrete powders (RCPs), which was then mixed with sodium silicate and silane to form an inorganic slurry. The slurry was further sprayed on the concrete surface to construct a superhydrophobic coating (SHC). Transmission electron microscopy and energy-dispersive X-ray spectroscopy mappings demonstrate that the nano-sized SiO₂ has been grafted on the sub-micron HNTs and then further adhered to the surface of micro-sized RCP, forming a kind of superhydrophobic particles (SiO₂/HNTs@RCP) featured of abundant micro-nano hierarchical structures.

The SHC surface presents excellent superhydrophobicity with the water contact angle >156°. Electrochemical tests indicate that the corrosion rate of mild steel rebar in coated concrete reduces three-order magnitudes relative to the uncoated one in 3.5% NaCl solution. Water uptake and chloride ion (Cl^-) diffusion tests show that the SHC exhibits high H₂O and Cl^- ions barrier properties thanks to the pore-sealing and water-repellence properties of SiO₂/HNTs@RCP particles. Furthermore, the SHC possesses considerable mechanical durability and outstanding self-cleaning ability.

SHC inhibits water uptake, Cl^- diffusion and rebar corrosion of concrete, which will promote the sustainable application of concrete waste in anti-corrosive concrete projects.

To improve the corrosion resistance of magnesium alloys, the construction of protective coatings is necessary to extend the service life of Mg-based materials.

SiO₂ nanoparticles modified by dodecyltrimethoxysilane (DTMS) were added to the PP and a superhydrophobic Mg(OH)₂/PP-60mSiO₂ composite coating was fabricated on the surface of AZ31 magnesium alloy via the hydrothermal method and subsequently the immersion treatment.

Hydrophilic SiO₂ nanoparticles become hydrophobic after modified by DTMS, showing a higher dispersibility in xylene. By incorporating modified SiO₂ nanoparticles into the composite PP coating, the hydrophobicity of the layer was enhanced, resulting in a contact angle of 166.3° and a sliding angle of 3.4°. It also improved the water repellency and durability of the coating. Furthermore, the intermediate layer of Mg(OH)₂ significantly strengthened the bond between the PP layer and the substrate. The Mg(OH)₂/PP-60mSiO₂ composite coating significantly enhances the corrosion resistance of the magnesium alloy by effectively blocking the infiltration of the corrosion anions during corrosion. The corrosion current density of the Mg(OH)₂/PP-60mSiO₂ composite coating is approximately 8.23 × 10^–9 A·cm^-2, which can achieve a magnitude three times lower than its substrate, making it a promising surface modification for the Mg alloy.

The composite coating effectively and durably enhances the corrosion resistance of magnesium alloys.

The impact of rolling on the performance of micro arc oxidation (MAO) coatings on ZM5 alloy has been underreported. The purpose of this study is to explore the correlation between rolling and the failure mechanism of MAO coatings in greater depth.

The influence of rolling on the corrosion and wear properties of MAO coating was investigated by phase structure, bond strength test (initial bond strength and wet adhesion), electrochemical impedance spectroscopy and wear test. The change of the surface electrochemical properties was studied by first principles analysis.

The results showed that the MAO coating on rolled alloy had better corrosion and wear resistance compared to cast alloy, although the structure and component content of two kinds of MAO coating are nearly identical. The difference in interface bonding between MAO coating and Mg substrate is the primary factor contributing to the disparity in performance between the two types of samples. Finally, the impact of the rolling process on MAO coating properties is explained through first-principle calculation.

A comprehensive explanation of the impact of the rolling process on MAO coating properties will provide substantial support for enhancing the application of Mg alloy anticorrosion.

Prototyping with affordable 3D printers empowers small businesses to create prototypes within a day and carry out multiple iterations of design, size, shape or assembly based on analytical results, bringing better products to market faster. This paper aims to turn the ideas into proofs of concept, advance these concepts to realistic prototypes and investigate the quality of printed prototypes prior to large-scale production.

The experimental approach focuses on the prototyping of portable medicine containers by Fused Deposition Modeling (FDM), modifying the prototypes by adding auxiliary braille flags that indicate patient initials and dosing information, and performing the moisture permeation study as well as the stability study for model drug products (i.e. ibuprofen tablets, guaifenesin tablets, dextromethorphan HBr soft gel capsules).

The study shows that an affordable 3D printer helps to create functional and visual prototypes that give a realistic depiction of the design and offer physical objects that could be investigated for product quality and feasibility.

To the best of the authors’ knowledge, this study was the first attempt to use a desktop FDM-based 3D printer to prototype portable medicine containers in a blister packet appearance with auxiliary braille flags that help validate early concepts and facilitate the conversation on refining product features in a rapid and affordable manner.

The purpose of this study is to establish Loratadine [LRD] quantification in purified and capsule formulations using a precise and specific Reversal Phase with a very high-performance liquid Chromatographic [RP-HPLC] technique. The approach was evaluated in agreement with the principles of the International Conference on Harmonization [ICH]. Arcus EP-C18 Ion Pac column, 5 m, 4.6 mm, 250 mm, mobile phase Methanol: Acetonitrile (60:40) v/v. Dibasic potassium phosphate buffer, pH 7.2, flow rate 1.0 ml/min.

The HPLC system used a 340 nm UV detector for testing. A 10-min run time was used for the analysis. At concentrations ranging from 2 to 10 g/ml, the technique was linear (R² = 0.9998), exact (intra-day and inter-day relative standard deviation [RSD] values 1.0%), accurate (range recovery = 96%–102%), exclusive and strong.

The detecting and quantitation limits were 0.92 g/ml and 2.15 g/ml, respectively.

The findings demonstrated that the proposed method could accurately determine LRD in bulk and pill dose formats quickly and accurately.

During the forming process, aluminum alloy sheets develop various types of textures and are subjected to cyclic loading as structural components, resulting in fatigue damage. This study aims to develop polycrystalline models with different orientation distributions and incorporate suitable fatigue indicator parameters to investigate the effect of orientation distribution on the mechanical properties of Al-7.02Mg-1.78Zn alloys under cyclic loading.

In this study, a two-dimensional polycrystalline model with 150 equiaxed grains was constructed based on optical microscope images. Subsequently, six different orientation distributions were assigned to this model. The fatigue indicator parameter of strain energy dissipation is utilized to analyze the stress response and fatigue crack driving force in polycrystalline models with different orientation distributions subjected to cyclic loading.

The study found that orientation distribution significantly influences fatigue crack initiation. Orientation distributions with a larger average Schmid factor exhibit reduced stress response and lower fatigue indicator parameters. Locations with a larger average Schmid factor experience greater plastic deformation and present a higher risk for fatigue crack initiation. RVE with a single orientation undergoes more rotation to reach cyclic steady state under cyclic loading due to the ease of deformation transfer.

Currently, there are no reports in the literature on the calculation of fatigue crack initiation for Al-Mg-Zn alloys using the crystal plasticity finite element method. This study presents a novel strategy for simulating the response of Al-7.02Mg-1.78Zn materials with different orientation distributions under symmetric strain cyclic loading, providing valuable references for future research.

This study aims to assess the oxidative stability of avocado oil (AO) at various temperatures, using butylated hydroxytoluene (BHT) as an artificial antioxidant and different concentrations of ultrasonic extract of Chlorella vulgaris.

Extracts of C. vulgaris were obtained using four solvents: water, acetone, ethanol and 80% ethanol-aqueous. Standard techniques were used to conduct qualitative phytochemical screening of the extracts. The extracted samples were analyzed for total phenolics, total flavonoids, antioxidant activity and phenolic compound fractionation. Some physicochemical parameters of AO treated with various concentrations of C. vulgaris ultrasonic extract compared to a 200 ppm BHT and exposed to different temperatures were measured.

The highest phenolic, flavonoids content and antioxidant activity was achieved by 80% ethanolic extract of C. vulgaris . The results showed that exposure of AO to high temperatures led to significant changes in the oil's physicochemical properties. These changes increased as the temperature increased. On the other hand, adding 80% ethanolic extract of C. vulgaris into AO reduced the effect of heat treatment on the change in physicochemical properties.

Adding 80% ethanolic extract of C. vulgaris into AO can potentially reduce the impact of heat treatment on the alteration of physicochemical properties.