International Journal of Building Pathology and Adaptation
Issue(s) available: 41 – From Volume: 35 Issue: 1, to Volume: 42 Issue: 7
![Cover of International Journal of Building Pathology and Adaptation](/insight/proxy/containerImg?link=/resource/publication/journal/d66af38adb2a5a657642ea9b525cd4aa/urn:emeraldgroup.com:asset:id:binary:ijbpa.cover.jpg)
Volume 42
Volume 41
Volume 40
Volume 39
Volume 38
Volume 37
Volume 36
Unraveling the underlying causes and consequences of construction safety neglect: a multiperspective analysis of the Bangladeshi construction industry
Md. Shajahan Ali, Tamanna Islam Meem, Md. Mehrab Hossain, Syed Ishtiaq AhmadConstruction accidents cause as much harm in Bangladeshi construction as it does globally. This study examines the primary causes of accidents and undertakes an impact assessment…
Examining the nexus of building regulations, urban planning, and housing prices and affordability: insights from Prishtina, Kosovo
Visar HoxhaThe present study aims to investigate the relationship between building regulations, urban planning, and perceptions of housing affordability and prices in Prishtina, Kosovo.
Assessment of interfacial mortar-mortar bond and pure shear strength of metakaolin-based geopolymer
Amira A.K. Hachem, Jamal M. Khatib, Mohamad Ezzedine El DandachyThis paper aims to investigate the bond strength of metakaolin-based geopolymer mortar with cement mortar.
Preventing construction site theft in Nigeria: an exploratory factor analysis of the root causes
Babatunde Abiodun Salami, Muizz Oladapo Sanni-Anibire, Joy Otibhor OlurinThe construction industry in emerging economies have suffered from productivity issues related to poor resource management as a result of theft. Therefore, this study aims to…
Construction economics at early stage: order of cost estimating, life cycle costing and development appraisal of a proposed office complex
Alolote I. AmadiThis study is carried out to demonstrate the computational practicalities of environmental construction economics necessary to offer early-stage cost advice. A case study of a…
Supply risk management and timely completion of force account construction projects among local government authorities in Dodoma, Tanzania
Shadrack Samwel Mwaiseje, Alban Dismas Mchopa, Faustine Peter PangaThe study’s purpose is to contribute to the supply risk management literature by examining its implications in Tanzania, specifically in the timely completion of force account…
Speech intelligibility evaluation of small-scale mosque with multiple domes design
Ndaru Nuridho Alfian, Rashid Kanu, Mohammed Alhaji MohammedMosques are built with dome-shaped ceilings for communal worship with common architectural styles worldwide for prayer. Since the acoustics of worship buildings are just as…
Investigating pozzolanic glass waste's role in reinforcing ultra-high-performance concrete beams for enhanced sustainability
Sevar Dilkhaz Neamat, James H. Haido, George WardehThis study aims to address sustainability challenges in construction by exploring the structural performance and environmental benefits of incorporating pozzolanic waste glass…
Predicting construction schedule overruns during COVID-19 using ordinal logistic regression
Nikhitha Adepu, Sharareh Kermanshachi, Apurva Pamidimukkala, Emily NwakpudaThe effects of the COVID-19 outbreak on the construction industry were formidable and far-reaching, as the construction sector is a major contributor to the gross domestic product…
The resilience of the construction supply chain to urban flooding
Wenping Xu, Wenwen Du, David G. ProverbsThis study aims to determine the key indicators affecting the resilience of the construction supply chain to flooding and calculate the resilience of the urban construction supply…
Distributed ledger technology integration in Nigerian construction industry: key drivers
John Aliu, Ayodeji Emmanuel Oke, Lydia Uyi EhiosunThis study aims to evaluate the drivers influencing the integration of distributed ledger technologies (DLTs) in the Nigerian construction industry to provide a comprehensive…
Localizing urban buildings carbon emissions reduction: causes and strategies
Sarfo Mensah, Collins Ameyaw, William Appiah YeboahThe lack of carbon emission reduction strategies specifically devised for buildings in urban areas in developing countries has affected the global course of tackling carbon…
Evaluating social media in architecture, engineering, construction and operation industry: a Nigerian perspective on applications and benefits
Ayodeji Emmanuel Oke, John Aliu, Abiola Oluwasogo Oyediran, Samuel Ukaha OnyeukwuIn several developing contexts, the delivery of Architecture, Engineering Construction and Operation (AECO) projects continually grapples with issues such as fragmented…
Key competencies for identifying construction activities that produce recyclable materials: an exploratory study
Mazen M. Omer, Rahimi A. Rahman, Muhammad Ashraf Fauzi, Saud AlmutairiConstruction activities generate overwhelming waste that is typically disposed of in landfills, which has significant environmental consequences and hinders national progress…
Impact of AEC project organizational design on the mental health of project management practitioners (PMPs) in Australia
Bashir Tijani, Xiao-Hua Jin, Osei-Kyei RobertDesign of architecture, engineering and construction (AEC) project organizations expose project management practitioners (PMPs) to poor mental health due to the influence of…
Production of ceramic bricks using nickel slags as contribution to decarbonization
Victoria Gurieva, Anastasia Ilyina, Sergey Klyuev, Magomed Saidumov, Tolya Khezhev, Igor Nedoseko, Roman Fediuk, Vitaly Shamanov, Batyr YazyevThe study suggests that the high concentration of mining and metallurgical enterprises on the territory of the Russian Ural region determines the need to consider industrial…
Implementing materials passports in the construction industry: empirical evidence from Ghana
Rhoda Gasue, Samuel Aklashie, Annabel Morkporkpor Ami Dompey, Kofi Agyekum, Desmond OpokuThe increasing concern for waste reduction in the global construction industry has led to diverse sustainable approaches emerging globally in the past decade. Material passport…
Adequacy of defects liability periods for public construction projects in Ghana
Collins Ameyaw, Sarfo Mensah, Blondel Akun Abaitey, Anita Asamoah-DuoduThe practice of the defects liability period (DLP) is a risk management strategy meant to secure durable and high-quality works. However, construction products continue to…
Study the impact of design method preference on the usefulness of concrete and on CO2 emissions
Salem H. Abdelgader, Marzena Kurpinska, Hakim Salem Abdelgader, Farzam Omidi Moaf, Mugahed AmranThe research investigates the impact of concrete design methods on performance, emphasizing environmental sustainability. The study compares the modified Bolomey method and…
Effect of human-centric technology adoption on sustainable construction success: a partial least square modeling
Ahsan Waqar, Idris Othman, Muhammad Shoaib MansoorThe primary objective of this study is to examine the effects of integrating human-centric technology on the overall effectiveness of sustainable building practises. This study…
Performance of concrete containing waste demolished concrete powder as a partial substitute for cement
Muhammad Haroon, Raja Bilal Nasar Khan, Anwar KhitabPresent work deals with the partial substitution of cement by waste demolished concrete powder (WDP) for reducing the carbon footprints of concrete.
Unveiling factors influencing the duration of arbitration practice in the Tanzania construction industry
Valentine George Mruma Luvara, Moses BenjaminMost construction projects are undertaken with the incentive of some form of profit which in business attracts disputes that key disputing parties intend to resolve through…
Assessment and analysis of the effects of implementing building information modelling as a lean management tool in construction management
Jhumana Akter, Shuvo Dip Datta, Mobasshira Islam, Bassam A. Tayeh, Sadia Ahmmed Sraboni, Niloy DasThe purpose of this research paper is to investigate and evaluate the impacts of utilising Building Information Modelling (BIM) as a lean management tool in Bangladesh's…
Pore properties and moisture loss of repair mortars under low-impact microwave curing
Shahriar Abubakri, Pritpal S. Mangat, Konstantinos Grigoriadis, Vincenzo StarinieriMicrowave curing (MC) can facilitate rapid concrete repair in cold climates without using conventional accelerated curing technologies which are environmentally unsustainable…
Innovative technology for converting automobile tire waste bead wires into recycled steel fibers for sustainable concrete composites: insights for the Al-Kharj Governorate construction industry
Mugahed AmranThe initiative for sustainability in the construction industry has led to the innovative utilization of automobile tire waste, transforming it into value-added products, toward…
Sustainable admixtures to enhance long-term strength and durability properties of eco-concrete: an innovative use of Saudi agro-industrial by-products
Mugahed Amran, Ali OnaiziLow-carbon concrete represents a new direction in mitigating the global warming effects caused by clinker manufacturing. Utilizing Saudi agro-industrial by-products as an…
Smart housing adaptations register with user matching functionalities for different mobility categories for the social housing sector
Adekunle Sabitu Oyegoke, Saheed Ajayi, Muhammad Azeem Abbas, Stephen OgunlanaThe lack of a proper register to store, match and display information on the adapted property has led to a waste of resources and prolonged delays in matching the disabled and…
Investigation of lightweight gypsum based on montmorillonite nanoclay with enhanced insulation properties
Erfan AnjomshoaNowadays, thermal comfort plays a prominent role in contemporary construction practices. Appropriate thermal insulation not only offers energy efficiency benefits in buildings but…
Mechanical and fracture properties of mortars reinforced with glass fibre and prepared with different cement types
Haruna Ibrahim, George Wardeh, Hanaa Fares, Elhem GhorbelThe main aim of the current study is to investigate the effect of Anti-Crack HP 67/36 glass fibre on the mechanical performance of mortars made of cement, with a focus on…
Determining the range of negotiable prices for public–private partnership infrastructure projects: a simulation approach
Arsalan Zakeri Afshar, Hamidreza Abbasianjahromi, S. Mohammad Mirhosseini, Mohammad EhsanifarThis research aims to measure the public sector comparator (PSC) to reach public–private partnership (PPP) projects' negotiable price range for water and sewage companies in Iran…
Maintaining or replacing a building's windows: a comparative life cycle study
Liza Sällström Eriksson, Sofia LidelöwEnergy-efficiency measures have always been important when renovating aging building stock. For property owners, window intervention is a recurring issue. Replacement is common to…
Building design considerations for healthy and active aging-in-place
Atinuke Arinola Ajani, Daramola Thompson OlapadeThe concept of aging-in-place has gained notable significance in the last decade due to a dramatic demographic shift in global population dynamics that have considerably affected…
Effect of plant-based natural fibers on the mechanical properties and volume change of cement paste
Rawan Ramadan, Hassan Ghanem, Jamal M. Khatib, Adel M. ElKordiThe purpose of this paper is to check the feasibility of using biomaterial such as of Phragmites-Australis (PA) in cement paste to achieve sustainable building materials.
Green building adaptation in hot-humid climates: assessment of coconut and corn husk fiber composite bricks as energy-efficient building envelopes
Obed Ofori Yemoh, Richard Opoku, Gabriel Takyi, Ernest Kwadwo Adomako, Felix Uba, George ObengThis study has assessed the thermal performance of locally fabricated bio-based building envelopes made of coconut and corn husk composite bricks to reduce building wall heat…
Deterministic and stochastic finite element modeling of reinforced concrete beams without stirrups containing plastic wastes
Maria Ghannoum, Joseph Assaad, Michel Daaboul, Abdulkader El-MirThe use of waste polyethylene terephthalate (PET) plastics derived from shredded bottles in concrete is not formalized yet, especially in reinforced members such as beams and…
Adoption of building information modelling for post-construction in Nigeria: examination of barriers and strategies development
Abdulkabir Opeyemi Bello, Calistus AyegbaDespite successfully adopting building information modelling (BIM) for design and construction, its adoption in post-construction is critically lagging. This study aims to…
Development of a smart home suitability indicator and indicative self-assessment platform for the disabled facilities grants (DFGs)
Adekunle Sabitu Oyegoke, Saheed Ajayi, Muhammad Azeem Abbas, Stephen OgunlanaDelay in housing adaptation is a major problem, especially in assessing if homes are suitable for the occupants and in determining if the occupants are qualified for the Disabled…
Undrained shear strength of soft clay reinforced with encapsulated stone dust columns
Md. Ikramul Hoque, Muzamir Hasan, Shuvo Dip DattaThe stone dust column was used to strengthen the sample and had a significant effect on improving the shear strength of the kaolin clay. The application of stone columns, which…
Driving forces behind the adoption of IEQ principles in building design: evidence from Nigerian quantity surveying firms
John Aliu, Doyin Hellen Agbaje, Ayodeji Emmanuel Oke, Andrew EbekozienThe main objective of this study is to evaluate the driving forces behind the adoption of indoor environmental quality (IEQ) principles in building designs from the perspectives…
Drivers of corporate social responsibility initiatives among construction companies in Nigeria
Innocent Chigozie Osuizugbo, Opeyemi Olanrewaju Oyeyipo, Aduragbemi Deborah OlojoThis study investigates the drivers of CSR practices among construction companies in Lagos, Nigeria.
The effects of a short information-giving intervention on householders’ beliefs and actions related to window opening as purge ventilation of water vapour: implications for surveyors
Richard John Boulton, Lia Louise Boulton, Michael John BoultonHigh levels of interior water vapour lead to condensation and black mould that in turn represent significant risks to residential properties and their occupants. Beliefs about…
Integrated approach for facility management of existing buildings using point cloud segmentation
Mohamed Marzouk, Mohamed ZaherFacility management gained profound importance due to the increasing complexity of different systems and the cost of operation and maintenance. However, due to the increasing…
Web platform for building roof maintenance inspection using UAS and artificial intelligence
Luciano de Brito Staffa Junior, Dayana Bastos Costa, João Lucas Torres Nogueira, Alisson Souza SilvaThis work aims to develop a web platform for inspecting roof structures for technical assistance supported by drones and artificial intelligence. The tools used were HTML, CSS and…
Evaluation of the level of awareness of the inhabitants on the importance of the energy retrofitting of buildings: case study of Tlemcen (Algeria)
Khadidja El-Bahdja Djebbar, Abderahemane MokhtariThis study aims to examine the awareness of the inhabitants regarding energy consumption in relation to comfort in Tlemcen and analyze the paths of influence and the effects of…
Consideration of senior citizens in private residential design in Sub-Saharan Africa: reflections from Akure, Nigeria
Victor Olutope Ige, Solomon Pelumi AkinbogunThe design of buildings is crucial to functionality and safety for senior citizens. People often refrain from talking about old age and its related support; however, it is…
The “fight” for adaptations: exploring the drivers and barriers to implementing home and environment modifications that support healthy ageing
Vikki McCall, Kenneth Gibb, Yang WangThe ageing and disabled population is fast growing, which emphasises the need to effectively modify current homes and environments to support healthy ageing and increasingly…
Energy consumption and carbon emission of conventional and green buildings using building information modelling (BIM)
Elijah Kusi, Isaac Boateng, Humphrey DansoUsing building information modelling (BIM) technology, a conventional structure in this study was converted into a green building to measure its energy usage and CO2 emissions.
Mitigating construction delays in Indian real estate projects through effective organizational and project management
Dillip Kumar DasThe delay in real estate projects in India is pervasive. Organization and management (O&M) and project management (PM)-related challenges are argued to contribute to project…
Relationship between indoor environmental quality and residential mobility: implications for student housing design and management in Northern Ghana
Elvis Attakora-Amaniampong, Iruka Chijindu Anugwo, Miller Williams AppauThis study aims to establish the relationship between indoor environmental quality and residential mobility in student housing in Ghana.
Design for maintainability (DfM) implementation among design professionals: empirical evidence from a developing country context
Kofi Agyekum, Annabel Morkporkpor Ami Dompey, Hayford Pittri, Edward Ayebeng BotchwayDesign for maintainability (DfM) is a construction technique that links maintenance objectives with the design process. Adopting DfM within the construction industry is a solution…
Investigating the impact of indoor environmental quality and internal design on students' satisfaction in Tehran and North Cyprus dormitories
Hirou Karimi, Mohammad Anvar Adibhesami, Maryam Ghasemi, Borhan Sepehri, Bonin Mahdavi EstalkhsarThis study was conducted to investigate the impact of indoor environmental quality (IEQ) and internal design on the performance of students in university dormitories in Tehran and…
Building information modeling (BIM) in green buildings: a state-of-the-art bibliometric review
Muhammad Ashraf Fauzi, Khairul Firdaus Anuar, Nurhaizan Mohd Zainudin, Mohd Hanafiah Ahmad, Walton WiderThis study evaluates the knowledge structure of building information modeling (BIM) in green buildings. Buildings are one of the main contributors to carbon emissions, and…
Eliciting social themes of flood mitigation and community engagement studies through text mining
Temitope Egbelakin, Temitope Omotayo, Olabode Emmanuel Ogunmakinde, Damilola EkundayoFlood preparedness and response from the perspective of community engagement mechanisms have been studied in scholarly articles. However, the differences in flood mitigation may…
Influence of building attributes on thermal comfort in naturally ventilated hospital wards in the hot-humid tropics of southeast Nigeria
Francis O. Uzuegbunam, Fynecountry N. Aja, Eziyi O. IbemThis research aims to investigate the influence of building design on the thermal comfort of occupants of naturally ventilated hospital (NVH) wards to identify the aspects with…
The behavior of strengthened RC beams under pure torsion using NSM-CFRP rope
Ahmed Ashteyat, Ala Taleb Obaidat, Yasmeen Taleb Obeidat, Ahmad Bani AwwadThe paper aims to introduces an experimental work to investigate the torsional behavior of reinforced concrete (RC) beams strengthened by near-surface mounted (NSM) carbon…
Occupational stress in the construction industry: a bibliometric-qualitative analysis of literature and future research directions
Dephanie Cheok Ieng Chiang, Maxwell Fordjour Antwi-Afari, Shahnawaz Anwer, Saeed Reza Mohandes, Xiao LiGiven the growing concern about employees' well-being, numerous researchers have investigated the causes and effects of occupational stress. However, a review study on identifying…
Removal or preservation in place? A review of the conservation management options for asbestos cement sheeting in heritage properties
Dirk H.R. SpennemannInvented in late 1890s, asbestos cement sheeting rose to prominence during the post-Second World War period as a building material for low-cost housing by state housing…
Does the analytical hierarchy process help appraisers make better decisions? A quasi-experimental approach for property investment comparables
Vincent Uwaifiokun Aihie, Abiodun Kolawole Oyetunji, Temitope Omotayo, Damilola EkundayoIncome from investment properties can fluctuate depending on the state of the economy. The idea that there is always a potential exit (sale) value whenever the property stops…
Redefining green roof systems with climbers: simulation of a conceptual model for thermal-radiative performance and plant vitality
Emmanuel Otchere-Darko, Laura Atuah, Richard Opoku, Christian KorantengGreen roofs are strategies for the ecological intensification of cities and a measure of meeting some of the sustainable development goals (SDGs). They have widely been adopted as…
Assessment of specifications' usability for engineering projects of the built environment
Ahmed M. Ibrahim, Mohammad A. Hassanain, Mohamed H. SalaheldinThis research compares consultants' and contractors' professional practices and perspectives on the use of specifications in the engineering of built environment projects.
Construction stakeholders' knowledge on zero carbon initiatives in New Zealand
Bindhu Kumari Sreekandan Nair Nidhin, Niluka Domingo, Thao Thi Phuong Bui, Suzanne WilkinsonIn light of climate change, the design and construction of buildings needs to shift from conventional to lower-carbon practices to maximise carbon reduction. Over the past few…
The impacts of building opening characteristics on dust particle deposition indoors
Mohammed Alhaji Mohammed, Kyari Bulama, Alhaji Modu Bukar, Mala Ali Modu, Audu Alhaji Usman, Alhaji Kasir Lawan, Garba Abba HabibThe effects of dust exposure in buildings and its health and comfort consequences continue to concern occupants, particularly those who spend most of their time indoors. This…
Factors affecting BIM implementation in Saudi Arabia: a critical analysis
Mohammad S. Al-Mohammad, Ahmad Tarmizi Haron, Rahimi A. Rahman, Yasir AlhammadiThis study examines the underlying relationships between the critical factors of building information modeling (BIM) implementation and the factors' groupings among architecture…
Change order effects on labor productivity and mitigation the effects by developing policies using system dynamic modeling: a case study in a construction project
Nadira Islam Nila, Jhumana Akter, Md. Mehrab HossainChange orders are a typical occurrence in building projects. Change orders indirectly affect labor productivity, resulting in a significant delay in the completion of a building…
The impact of disruptive events on built environment degree apprenticeship delivery – a case study of COVID-19
David Oloke, Louis Gyoh, Emmanuel Itodo Daniel, Olugbenga Oladinrin, Nagwan AbdallahThis study aims to understand the impact of the Covid-19 pandemic disruptive event on delivery of the built environment degree apprentice programme in higher education in the UK…
Boosting employee performance through gamification: a study of the awareness and usage of game elements among construction professionals
Ayodeji Emmanuel Oke, John Aliu, Ahmed Farouk Kineber, Timilehin AbayomiThis study examines the level of awareness and usage of game elements among construction professionals with a view to promoting the usage of gamification tools for the effective…
An automated BIM and system dynamics tool for assessing safety leading indicators in construction projects
Mostafa Dadashi Haji, Behrouz BehnamIt is a well-accepted note that to enhance safety performance in a project by preventing hazards, recognizing the safety leading indicators is of paramount importance.
COVID-19 pandemic disruptions and environmental turbulence in architectural, engineering and construction project delivery space
Michael Adesi, Duga Ewuga, De-Graft Owusu-Manu, Frank Boateng, Ernest KissiFirms in the architectural, engineering, construction and operations (AECO) sector continue undertaking projects in a disruptive environment due to the coronavirus disease 2019…
Evaluation of climate change effects on residential building cooling and heating demands in New Zealand: implications for energy efficiency standards and building codes
Zahra Jalali, Asaad Y. Shamseldin, Sandeeka MannakkaraClimate change reports from New Zealand claim that climate change will impact some cities such as Auckland from a heating-dominated to a cooling-dominated climate. The benefits…
Process monitoring and terminal verification of π–section girder cable-stayed bridge
Kexin Zhang, Dachao Li, Xingwei XueIn this paper, taking a p-section girder cable-stayed bridge as an example, the construction monitoring and load test of the bridge are implemented.
Strategic planning of sustainable maintenance in heritage school buildings: Malaysia perspectives
Norsafiah Norazman, Naziah Muhamad Salleh, Siti Nurul Asma' Mohd Nashruddin, Wan Norisma Wan IsmailRetrofitting and rehabilitation are part of the conservation approach in Heritage Building Conservation Guideline 2016 in Malaysia. Heritage buildings can be retrofitted to…
Sustainable refurbishment of existing, typical single-family residential buildings in Greece
Flora Bougiatioti, Eleni Alexandrou, Miltiadis KatsarosResidential buildings in Greece constitute an important portion of the existing building stock. Furthermore, most of these buildings were built prior to the first Thermal…
Barriers to BIM for facilities management adoption in Nigeria: a multivariate analysis
Dubem Isaac Ikediashi, Otoabasi Asuquo Ansa, Anthony Okwogume Ujene, Sani Reuben AkohBuilding information modelling (BIM) has been established in the literature as a successful platform that creates an intelligent virtual model for processing data from conceptual…
Performance evaluation of a single-side windcatcher in the transitional seasons (case study: Khousf town, Southern Khorasan Province, Iran)
Mansoure Dormohamadi, Mansoureh Tahbaz, Azin Velashjerdi FarahaniLife experience in hot and arid areas of Iran has proved that in the transitional seasons (spring and autumn) in which the climate is not too hot, passive cooling systems such as…
Evolution of the courtyard to the skycourt: a bibliometric analysis of research trends
Rasha Adel, Naglaa Megahed, Asmaa M. Hassan, Merhan ShahdaPassive design strategies contribute to improving indoor comfort conditions and reducing buildings' energy consumption. For several years, courtyards have received wide attention…
Critical project management success factors analysis for the construction industry of Bangladesh
Shuvo Dip Datta, Md. Habibur Rahman Sobuz, Mohammad Nafe Assafi, Norsuzailina Mohamed Sutan, Md. Nazrul Islam, Maria Binte Mannan, Abu Sayed Mohammad Akid, Noor Md. Sadiqul HasanThis paper aims to identify the critical project management success factors and analyze those factors to achieve a sustainable construction industry in Bangladesh.
Factors influencing adoption of green buildings in Tanzania: a qualitative case study
Frank Victor Mushi, Huba Nguluma, Jacob KihilaGreen buildings have proven to be essential contributors to the sustainability of buildings in the construction industry. However, in developing economies, the rate of green…
A weather-adaptive perspective to building cost estimation in Nigeria: exploring climate-induced cost variance
Alolote I. AmadiUsing Nigeria, as a point of reference, this study aims to explore the applicability of climatic variables as analytically valid factors for conceptual cost estimation. This is in…
Role of sustainable refurbishment in the perception of quality of life of residential building occupants in Prishtina, Kosovo
Visar Hoxha, Fuat PallaskaThe aim of this research is to investigate the impact of thermal, acoustic and HVAC upgrades on the perception of the quality of life among residential building occupants.
Utilization of simulation tools for building performance assessment among design professionals
Edward Ayebeng Botchway, Kofi Agyekum, Jenefailus Nikoi Kotei-Martin, Samuel Owusu AframThis study explores the utilization of simulation tools for building performance assessments among design professionals in Ghana.
Promoting construction for sustainability transformation: the perspective of institutional theory
Patience Tunji-Olayeni, Kahilu Kajimo-Shakantu, Timothy Oluwafemi Ayodele, Olubola BabalolaSustainability transformation in the construction industry is vital for the attainment of sustainable development goals. While conventional construction has been at the expense of…
Achievement to adaptive reuse strategies of industrial heritage: learning from Iranian cases
Mohammad Javad Porkar, Mehdi Khakzand, Nima MardanlouThe adaptability of multi-functional industrial buildings can be an important factor in their reuse. This utility requires the evaluation of factors that are effective apart from…
Performance of double skin steel tube columns filled with self-compacted concrete containing nanoclay
Ala'aldin Al-Hassoun, Rabab AllouziConcrete-filled double skin steel tubes (CFDST) columns are taken more attention due to their ability to withstand high structural loads in structures such as high-rise buildings…
The 2018–2019 UK residential dwellings clay shrinkage subsidence event
Margaret MacQueen, Michael Lawson, Wen-Nyi DingIn the UK, responses to intense weather events regarding national and regional level perils include the support of a General Insurance policy at the address level as part of…
Property level flood risk adaptation: technical and socioeconomic dimensions to resilience
Alolote AmadiUnderstanding the technical and socioeconomic dimensions to resilience is core to making a business case for property-level flood risk adaptation. The study investigates the…
Effect of cement and geopolymer stabilization on the thermal comfort: case study of an earthen building in Burkina Faso
Ibrahim Neya, Daniel Yamegueu, Adamah Messan, Yezouma Coulibaly, Arnaud Louis Sountong-Noma Ouedraogo, Yawovi Mawuénya Xolali Dany AyiteThe stabilization of earthen blocks improves their mechanical strength and avoids adobe construction erosion due to rainwater. However, the stabilization affects the thermal…
A practitioner study into the variability of UK domestic energy assessments
Toby Gledhill, William Swan, Richard FittonThis paper aims to focus on the assessment of a domestic property's energy performance status by a domestic energy assessor (DEA), to ascertain the possible underlying reasons for…
Review of drivers of teamwork for construction health and safety
Aziz Yousif Shaikh, Robert Osei- kyei, Mary Hardie, Matt StevensThis paper systematically reviewed research work on drivers of teamwork, which will reinforce construction work teams to enhance workers’ safety performance. This study adds to…
Factors affecting the construction quality in Bangladesh
Md. Ikramul Hoque, Muzamir HasanQuality is a sensitive and high-priority issue in the global construction including in Bangladesh. This research is intended to provide necessary information to stakeholders and…
Impacts of COVID-19 on the construction sector in the least developed countries
Shakil Ahmed, Iffat Haq, S.M. Asif AnamGlobal construction has been affected by COVID-19 unprecedently. The construction sectors in the least developed countries are considered as vulnerable, but the covid made the…
The implications of adopting sustainable urbanism in developing resilient places in Abuja, Nigeria
Job Momoh, Benachir Medjdoub, Obas John Ebohon, Olubisi Ige, Bert Ediale Young, Jin RuoyuSustainable urbanism is the study of both cities and the practices to build them, which focusses on promoting their long-term viability by reducing consumption, waste and harmful…
Professionals’ perception studies of vertical greening systems in Lagos, Nigeria
Olawale Olusoga, Olumuyiwa AdegunThe purpose of this study is to explore the perceptions of built environment professionals on the benefits and impediments limiting the widespread acceptance of vertical greening…
Decisive factors for decision-making to achieving sustainable procurement in construction projects
Innocent Chigozie Osuizugbo, Olumide Afolarin AdenugaThis study aimed at determining the decisive factors for achieving sustainable procurement in construction projects.
A failure mode, effects and criticality analysis-based method for formwork assessment and selection in building construction
Saleh Abu Dabous, Tareq Zadeh, Fakhariya IbrahimThis study aims at introducing a method based on the failure mode, effects and criticality analysis (FMECA) to aid in selecting the most suitable formwork system with the minimum…
Stakeholders prioritization of key performance indicators on public and private tertiary educational projects in Osun State, Nigeria
Nathaniel Ayinde Olatunde, Idienumah Monday Fidelis, Imoleayo Abraham Awodele, Bosede Olajumoke AdebayoThe study assessed the stakeholders prioritization of key performance indicators (KPIs) on public and private tertiary educational projects in Osun State, Nigeria intending to…
Experimental and analytical behavior of one-way fiber foamed concrete slabs reinforced with/without glass fiber grid under 4-point flexural test
Aya Qatawna, Rabab Allouzi, Samih QaqishThe primary objective of this study is to produce one-way slabs made of LWFC with low density and sufficient compressive strength suitable for structural purpose then investigate…
Relationship between physical environment and neuropsychological perception in children with Asperger’s disorder
Haniyeh Ehsani Far, Siyamak Nayyeri Fallah, Akram KhaliliThis research aims to examine the relationship between the physical environment and neuropsychological perception in children with Asperger’s disorder.
An assessment of indoor environmental quality in COVID-19 affected houses: a case study in Banda Aceh, Indonesia
Laina Hilma Sari, Brit Anak Kayan, Zahriah ZahriahDuring the COVID-19 pandemic in 2020–2021 in Indonesia, the indoor environmental quality (IEQ) of local houses occupied by infected occupants was adversely affected. This paper…
Comparison of the building adaptability assessment models: a semi - systematic review
Hasan Unver, Orkun Alptekin, Melike KalkanAdaptability studies in the literature include repetitive models and completely independent new model proposals. As a result of the evaluation of these studies, the lack of…
Barriers to the deployment of solar photovoltaic in public universities in South Africa: a Delphi study
Nutifafa Geh, Fidelis Emuze, Dillip Kumar DasThe deployment of solar photovoltaic (PV) in higher education institutions is beneficial and critical for attaining sustainable campus goals. However, various barriers hamper the…
BIM-based analysis of construction safety tracking using behavior-based safety in Bangladeshi construction industry
Tamanna Islam Meem, Md. Mehrab Hossain, Jhumana AkterIn comparison to other industries, the construction industry is one of the most dangerous industries. Behavior-based safety (BBS) is a common and useful technique for risk…
The association of physical development density, prevalence and types of microbes in colonized façade finishes in Enugu metropolis, Nigeria
Lawrence A. Isiofia, Emmanuel Nna, Francis O. Uzuegbunam, Eziyi O. IbemThis research examines the association of physical development density, prevalence and types of microbes in colonized façade finishes of buildings in Enugu metropolis, Nigeria.
Adaptive re-use of industrial heritage and its role in achieving local sustainability
Pari Alavi, Hooman Sobouti, Majid ShahbaziThe current study evaluates the success of this project at the local scale by examining the degree of compliance with local sustainability indicators after the revival of the…
Measuring property flood resilience (PFR) in UK homes
Taiwo Adedeji, David G. Proverbs, Hong Xiao, Victor Oluwasina OladokunDespite the present focus on improving the resilience of homes to flooding in UK flood risk management policy and strategy, a general measurement framework for determining levels…
Socio-ecological risks management dynamic simulation in megaproject development of the Edinburgh Tram Network
Prince Boateng, Temitope Omotayo, Temidayo Osunsanmi, Damilola EkundayoThe inherent risks and their interactive impacts in megaproject development have been found in numerous cases worldwide. Although risk management standards have been recommended…
Flexural bearing capacity of reinforced concrete beams reinforced with carbon fiber reinforced plastics strips and ultra-high performance concrete layers
Long Liu, Songqiang WanTo make full use of the tensile strength of near surface mounting (NSM) pasted carbon fiber reinforced plastics (CFRP) strips and further increase the flexural bearing capacity…
Modeling labor costs using artificial intelligence tools
Mohammed Hamza Momade, Serdar Durdyev, Saurav Dixit, Shamsuddin Shahid, Abubakar Kori AlkaliConstruction projects in Malaysia are often delayed and over budget due to heavy reliance on labor. Linear regression (LR) models have been used in most labor cost (LC) studies…
Reducing overheating risk in naturally ventilated houses through the design of compressed Earth blocks walls in hot dry climate
Césaire Hema, Philbert Nshimiyimana, Adamah Messan, Abdou Lawane, Geoffrey Van MoesekeAppropriate thermal properties of walls can lead to the improvement of the indoor environment of buildings especially in countries with low energy availability such as Burkina…
Factors influencing adoption of construction technologies in Vietnam's residential construction projects
Mohammed Hamza Momade, Serdar Durdyev, Nguyen Van Tam, Shamsuddin Shahid, Jasper Mbachu, Yusra MomadeVietnam's construction technology (CT) adoption is low when compared to other countries with similar gross domestic product (GDP) per capita resulting in lesser productivity. The…
Assessment of susceptibility of buildings with different façade finishes to microbial decay in the hot-humid tropical environment of Enugu, southeast Nigeria
Francis O. Uzuegbunam, Lawrence A. Isiofia, Eziyi O. IbemBuildings respond differently to microbial invasion depending on the design, type of construction materials and finishes used and extent of exposure to climatic factors. However…
Investigation and optimization of forced convective heat transfer around a tall building using experimental results
Javad Babakhani, Farzad VeysiThe purpose of this article is to investigate the variables affecting heat transfer from the surfaces of a tall building and also the extent of the impact of each of them. Another…
Defects in Malaysian hospital buildings
Christtestimony Jesumoroti, AbdulLateef Olanrewaju, Soo Cheen KhorHospital building maintenance management constitutes a pertinent issue of global concern for all healthcare stakeholders. In Malaysia, the maintenance management of hospital…
Development of interaction diagrams of reinforced concrete short columns strengthened by NSM-CFRP strips using finite element method
Yasmeen Taleb Obaidat, Wasim Barham, Rawan Abu libdehThe main aim of this study is to examine the behavior of reinforced concrete short columns strengthened using longitudinal near surface mounted (NSM)-carbon fiber reinforced…
Evaluating water sorption isotherms, drying kinetics and exergy performance of traditionally earth mortar drying system based on hybrid solar-electrical dryer
Mounir Kouhila, Younes Bahammou, Hamza Lamsyehe, Zakaria Tagnamas, Haytem Moussaoui, Ali Idlimam, Abdelkader LamharrarThe paper aims to evaluate drying performance of earth mortar by solar drying for more durability, minimize pathologies in traditional construction and determine the influence of…
Factors influencing the organisational capabilities of the public sector for implementation of building information modelling in construction projects
Anthony Olukayode Yusuf, Akintayo Opawole, Nofiu Abiodun Musa, Dele Samuel Kadiri, Esther Ilori EbunoluwaThis study examined factors influencing the organisational capabilities of the public sector for building information modelling (BIM) implementation in construction projects with…
A case study to explore the synergy between HBIM and BEM for maintenance of historical buildings
Ana Carolina Franco De Oliveira, Cristiano Saad Travassos do Carmo, Alexandre Santana Cruz, Renata Gonçalves FaiscaIn developing countries, such as Brazil, the construction sector is consistently focused on the construction of new buildings, and there is no dissemination of the preservation…
Developing a framework for building maintenance: a case study of Malaysia's low-cost housing via soft system methodology
Andrew Ebekozien, Mohamad Shaharudin Samsurijan, Clinton Aigbavboa, Andrew I. Awo-OsagieThe cost of residential building maintenance can harmfully affect low-income earners' expenditure if not checked. A customised maintenance concept via a framework will ensure…
Scan-to-BIM technique in building maintenance projects: practicing quantity take-off
Michael C.P. Sing, Sophie, Y.Y. Luk, Ken H.C. Chan, Henry J. Liu, Richard HumphreyIn Hong Kong, over 20,000 private residential buildings will be 50 plus years old by 2039. However, building maintenance has not been owners’ popular interest because of the high…
ISSN:
2398-4708Renamed from:
Structural SurveyOnline date, start – end:
2017Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditors:
- Dr Mark Shelbourn
- Prof David Proverbs