Search results

This study aims to adjust Thesis-type properties on Schema.org using metadata models and standards (MS) (Bibframe, electronic thesis and dissertations [ETD]-MS, Common European Research Information Format [CERIF] and Dublin Core [DC]) to enrich the Thesis-type properties for better description and processing on the Web.

This study is applied, descriptive analysis in nature and is based on content analysis in terms of method. The research population consisted of elements and attributes of the metadata model and standards (Bibframe, ETD-MS, CERIF and DC) and Thesis-type properties in the Schema.org. The data collection tool was a researcher-made checklist, and the data collection method was structured observation.

The results show that the 65 Thesis-type properties and the two levels of Thing and CreativeWork as its parents on Schema.org that corresponds to the elements and attributes of related models and standards. In addition, 12 properties are special to the Thesis type for better comprehensive description and processing, and 27 properties are added to the CreativeWork type.

Enrichment and expansion of Thesis-type properties on Schema.org is one of the practical applications of the present study, which have enabled more comprehensive description and processing and increased access points and visibility for ETDs in the environment Web and digital libraries.

This study has offered some new Thesis type properties and CreativeWork levels on Schema.org. To the best of the authors’ knowledge, this is the first time this issue is investigated.

The objective of this study was to develop wearable suit platforms with various anchoring structure designs with the intention of improving wearability and enhancing user satisfaction.

This study selected fabrics and materials for the suit platform through material performance tests. Two anchoring structure designs, 11-type and X-type are compared with regular clothing under control conditions. To evaluate the comfort level of the wearable suit platform, a satisfaction survey and electroencephalogram (EEG) measurements are conducted to triangulate the findings.

The 11-type exhibited higher values in comfort indicators such as α, θ, α/High-β and lower values in concentration or stress indicators such as β, ϒ, sensorimotor rhythm (SMR)+Mid-β/θ, and a spectral edge frequency of 95% compared to the X-type while walking. The 11-type offers greater comfort and satisfaction compared to the X-type when lifting based on the EEG measurements and the participants survey.

It is recommended to implement the 11-type when designing wearable suit platforms. These findings offer essential data on wearability, which can guide the development of soft wearable robots.

This study aims to contribute knowledge about different professional identities represented among HR practitioners from Weber's “ideal types” framework.

The paper is based on semi-structured interviews with 34 Swedish HR practitioners working in large public and private organisations.

The findings reveal that HR practitioners' identity is perceived as indistinct, unclear and shattered, which leaves lots of room for interpreting HR identity. Based on a thematic content analysis, three different ideal-type identities are presented, each representing the characteristic traits of an HR identity type. These are the Defender who always supports the managers, the Disturber who questions the managers in favour of the employees and the Driver who focuses on the economic expansion of the organisation.

One of the potential constraints of this study is the authors’ reliance on interview data. This finding implies that future research can employ mixed methods or observational techniques to bridge the gap between narrated responsibilities and real-time actions. The data source, predominantly from larger organisations, presents another limitation. This raises a significant research implication: there is a need to study identity formation among HR practitioners in smaller organisations. The theoretical framework this study contributes can aid in comprehending HR practitioners' identities and their corresponding actions. Continued research might explore the significance of these ideal-type identities.

The model presented provides a new way of understanding HR practitioners' complex and shattered professional identity and the various stakeholders that direct different expectations towards them. This knowledge can be used both in HR education and in HR work as a basis for discussing the social work environment of HR practitioners and negotiating their work and identity.

The study contributes knowledge of the professional identities of HR managers, an under-researched area, especially when it comes to empirical research about the HR practitioners' own experiences of their everyday work and view of the HR profession.

The purpose of this paper is to investigate both the impact of different reward types and the adoption of knowledge-sharing practice on a crowdsourcing-based open innovation contest. Despite the benefit of knowledge sharing, contestants could struggle to find a balance between knowledge sharing and knowledge protection in open innovation.

The authors' approach follows a stylised contest model in a game-theoretical setting in which contestants first decide on their efforts and then the contest sponsor chooses the winner. Moreover, the outcome of an open innovation contest is delineated as either intermediate goods that require further refinement and risk-taking versus a market-ready end product for the contest sponsor. The authors also investigate how knowledge sharing among contestants would be influenced by reward types such as fixed-monetary prizes vs performance-contingent awards.

The contest sponsor will lower the prize level after adopting knowledge sharing. Therefore, the total effort will decline regardless of the reward type. Moreover, the choice of reward types depends on the contest sponsor's characteristics because the performance-contingent award is suitable for a large market size but the fixed-monetary prize can more efficiently raise the quantity of contestant inputs.

Prior studies have tested the connection between contest performance and knowledge sharing in crowdsourcing-based contests; however, there is not an integrated framework to best design the operation of a contest when considering different reward types and knowledge-sharing practices.

Previous research has analyzed the consequence of network stability; however, little is known about how partner type diversity influence network stability in R&D network. Based on knowledge-based view and social network theory, the purpose of this paper is to unravel the internal mechanisms between partner type diversity and network stability through the mediating role of knowledge recombination in R&D network.

The authors collected an unbalanced panel patent data set from information communication technology industry for the period 1994–2016. Then, the authors tested the different dimensions of partner type variety and its relevance in the R&D network and the mediating role of knowledge recombination through adopting the multiple linear regression.

Results indicate an inverted U-shaped relationship between partner type diversity (variety and relevance) and network stability, whereas knowledge recombination partially mediate these relationships.

From the perspective of R&D networks, this paper explores that there are the under-researched phenomena the antecedent of network stability through nodal attributes (i.e. partner type variety and partner type relevance). Moreover, this paper empirically examined the mediating role of knowledge recombination in the partner type diversity–network stability relationships. The novel perspective allows focal firm to recognize importance of nodal attributes, which are critical to fully excavate the potential capabilities of cooperating partners in R&D network.

Fabrics, which are one of the raw materials of the clothing industry, constitute approximately 40–45% of the total cost of an apparel product. Due to the labor-intensive nature of this industry and failure to apply scientific methods along with the manufacturing processes, the wastes in the raw materials, including fabrics, become higher. Besides, quality deficiencies are encountered due to the same reasons. This study aims to determine the optimum total fabric layer height based on the fabric type during the cutting process with a straight knife cutting machine, which provided a decrease in the cutting errors.

Frequently used fabric types in an enterprise operating in organic cotton knitwear were listed. During the cutting tests, the straight knife cutting machine was used as the cutting device. The weight and thickness values of the fabrics were obtained to provide a comparison basis. Two different algorithms were created to evaluate the defective pieces according to fabric type, cutting height and error placement. Cutting resistances of these fabrics were also determined to evaluate the defect reasons. In the end, optimum total fabric layer count and total cutting height suggestions were proposed for each fabric type for a minimum cutting error.

At the end of this study, the error-free layers were identified per fabric type. At the same time, the optimum cutting height was suggested for each fabric basis. For 40/1 single jersey fabrics, the cutting height should be between 2.10 cm and 10.40 cm; for 30/1 single jersey fabrics, between 1.65 cm and 5.70 cm; for 20/1 single jersey fabrics, between 1.83 cm and 6.70 cm; for two-thread fleece fabrics, between 2.13 cm and 4.70 cm; and for three-thread fleece fabrics, between 0 cm and 4.90 cm.

Within the scope of the study, since the products made of knitted fabric were produced more frequently and in large quantities, the study was carried out with 15 different types of knitted fabrics at 10 different layers. The same methods should be applied for woven, denim and nonwoven fabric types, which would shed light on the following studies.

Due to scarce research carried out on the cutting procedure of the clothing industry in regards to sustainability, this study aims to contribute to this area. The main difference between this study and the studies that mostly make mathematical predictions about the cutting procedure is that it is practice-oriented.

This study aims to develop workplace well-being indexes for construction sites of different project types (infrastructure, high-rise and low-rise). Accordingly, the study objectives are to identify the critical factors that affect workplace well-being at construction sites, compare the critical factors between different project types, categorize the critical factors into subgroups and compute indexes for the critical factors and subgroups.

Data from a systematic literature review and semi-structured interviews with construction industry professionals were used to extract 19 potential factors that affect workplace well-being. Then, a structured questionnaire survey was distributed, and 169 valid responses were collected. Finally, the data were analyzed using normalized mean analysis, agreement analysis, factor analysis and fuzzy synthetic evaluation.

The study findings revealed that there are 11, 11, 8 and 12 critical factors across overall infrastructure, high-rise and low-rise construction projects. Out of those, six critical factors are overlapping across project types, including “general safety and health monitoring,” “salary package,” “timeline of salary payment,” “working hours,” “communication between workers” and “planning of the project.” Accordingly, the critical factors can be categorized into two subgroups within each project type. Finally, the development of indexes shows that infrastructure construction projects have the greatest index compared to other project types.

This study contributes to filling the current knowledge gap by developing workplace well-being indexes at construction sites across different project types. The indexes would assist decision-makers in understanding the current state of workplace well-being. This increases the commitment and recognition of well-being across different construction project types.

Microribbon with meander type based on giant magnetoimpedance (GMI) effect has become a research hot spot due to their higher sensitivity and spatial resolution. The purpose of this paper is to further optimize the line spacing to improve the performance of meanders for sensor application.

The model of GMI effect of microribbon with meander type is established. The effect of line spacing (Ls) on GMI behavior in meanders is analyzed systematically.

Comparison of theory and experiment indicates that decreasing the line spacing increases the negative mutual inductance and a consequent increase in the GMI effect. The maximum value of the GMI ratio increases from 69% to 91.8% (simulation results) and 16.9% to 51.4% (experimental results) when the line spacing is reduced from 400 to 50 µm. The contribution of line spacing versus line width to the GMI ratio of microribbon with meander type was contrasted. This behavior of the GMI ratio is dominated by the overall negative contribution of the mutual inductance.

This paper explores the effect of line spacing on the GMI ratio of meander type by comparing the simulation results with the experimental results. The superior line spacing is found in the identical sensing area. The findings will contribute to the design of high-performance micropatterned ribbon with meander-type GMI sensors and the establishment of a ribbon-based magnetic-sensitive biosensing system.

The purpose of this research is to explore the effect of goal type of user-generated content (UGC) on consumers' intention of within-domain and across-domain compensatory consumption in closed social media platforms, the mediating effect of self-threat, self-enhancement and self-protection motivation and the moderating effect of self-efficacy.

Four between-subject experiments were conducted to verify the hypotheses presented in this research. Study 1a had a sample size of 60 respondents and examined the effect of goal type of UGC on compensatory consumption. Study1b replicated the effect by using a sample size of 60 respondents. Study 2 had a sample size of 70 respondents and verified the mediating role of self-threat, self-enhancement motivation and self-protection motivation. Study 3 examined self-efficacy as a critical moderator by using a sample of 255 participants.

Study 1a and Study 1b demonstrate that UGC with an attainment goal (vs maintenance goal) is more easily produced within-domain and across-domain compensatory consumption. Study 2 verifies that the effect of goal type of UGC on within-domain compensatory consumption is serially mediated by self-threat and self-enhancement motivation, and the effect of goal type of UGC on across-domain compensatory consumption is serially mediated by self-threat and self-protection motivation. Study 3 demonstrates that self-efficacy not only moderates the effects of self-threat on within-domain or across-domain compensatory consumption respectively, but also moderates the whole mediating path structure.

This research extends the understanding of UGC and addresses the inconclusive evidence of the impact of goal type of UGC on consumer compensatory behavior in the context of closed social media platforms. The authors identify the moderating role of self-efficacy, which explains why consumers adopt different compensatory strategies.

This study aims to investigate the fit of a promotion (prevention) focus with malicious (benign) envy and how this fit influences positive and negative behaviours, depending on the context.

Four empirical studies (two laboratory and two online experiments) were used to test key hypotheses. Study 1 manipulated regulatory focus and envy in a job application setting with university students. Study 2 engaged similar manipulations in a social media setting. Studies 3 and 4 extended the regulatory focus and envy manipulations to the general population in pay-what-you-want (PWYW) and pay-it-forward (PIF) restaurant contexts.

The findings showed that a promotion (prevention) focus fits with the emotion of malicious (benign) envy. In the social media context, promotion and prevention foci demonstrated negative behaviour, including unfollowing the envied person, when combined with malicious and benign envy. In the PWYW and PIF contexts, combining envy with a specific type of regulatory focus encouraged both positive and negative behaviours through influencing payments.

Future research could validate and extend this study’s findings with different product/service categories, cross-cultural samples and research methods such as field experiments.

The four studies’ findings will assist managers in formulating marketing strategies to enhance their positioning of target products/services, possibly leading to higher prices for PWYW and PIF businesses.

The conceptual model is novel as, to the best of the authors’ knowledge, no prior research has proposed and tested the fit between envy type and regulatory foci.