Search results

The color painting of ancient buildings has high historical and artistic value but is prone to aging due to long-term outdoor exposure. The purpose of this study is to develop a new type of sealing coating to mitigate the impact of ultraviolet (UV) light on color painting.

The new coating was subjected to a 500-h UV-aging test. Compared with the existing acrylic resin Primal AC33, the UV aging behavior of the new coating, such as color difference and gloss, was studied with aging time. The Fourier infrared spectra of the coatings were analyzed after the UV-aging test.

Compared with AC33, the antiaging performance of SF8 was substantially improved. SF8 has a lower color difference value and better light retention and hydrophobicity. The Fourier transform infrared spectroscopy results showed that the C-F bond and Si-O bonds in the resin of the optimized sealing coating protected the main chain C-C structure from degradation during the aging process; thus, the resin maintained good stability. The hindered amine light stabilizer TN292 added to the coating inhibited the antiaging process by trapping active free radicals.

To address the problem of UV aging of oil-decorated colored paintings, a new type of sealing coating with excellent antiaging properties was developed, laying the foundation for its demonstration application on the surface of ancient buildings.

Because of the various advantages of reinforcement learning (RL) mentioned above, this study uses RL to train unmanned aerial vehicles to perform two tasks: target search and cooperative obstacle avoidance.

This study draws inspiration from the recurrent state-space model and recurrent models (RPM) to propose a simpler yet highly effective model called the unmanned aerial vehicles prediction model (UAVPM). The main objective is to assist in training the UAV representation model with a recurrent neural network, using the soft actor-critic algorithm.

This study proposes a generalized actor-critic framework consisting of three modules: representation, policy and value. This architecture serves as the foundation for training UAVPM. This study proposes the UAVPM, which is designed to aid in training the recurrent representation using the transition model, reward recovery model and observation recovery model. Unlike traditional approaches reliant solely on reward signals, RPM incorporates temporal information. In addition, it allows the inclusion of extra knowledge or information from virtual training environments. This study designs UAV target search and UAV cooperative obstacle avoidance tasks. The algorithm outperforms baselines in these two environments.

It is important to note that UAVPM does not play a role in the inference phase. This means that the representation model and policy remain independent of UAVPM. Consequently, this study can introduce additional “cheating” information from virtual training environments to guide the UAV representation without concerns about its real-world existence. By leveraging historical information more effectively, this study enhances UAVs’ decision-making abilities, thus improving the performance of both tasks at hand.

Modernization and the rise of living standards have introduced new variants of traditional foods, from their tastes to the way they are enjoyed. This study aims to explore and examine the impacts of both traditional and modern marketing stimuli on restaurant choice intention for experiencing culinary traditions, hence answering the question of how traditional and modern aspects live together to bring about the most desirable experience for customers of traditional cuisine.

Based on the stimuli-organism-response (S-O-R) theory and mixed research methods, a model linking service quality dimensions, perceived value and restaurant choice intention is formulated and tested on quantitative data from 431 customers of Gen Y and Gen Z, given the case of Vietnamese Pho.

The findings show that food quality demonstrates the strongest impact on restaurant choice intention, followed by authenticity and nostalgia marketing. These relationships are partially mediated by perceived value. Hygiene risks and perceived value are also found to directly affect restaurant choice intention. Nevertheless, our findings are quite different between Gen Y and Gen Z customers.

This research provides crucial strategic implications for restaurant managers when it comes to serving traditional foods for different generations.

This study responds to the existing gap by examining and comparing the impacts of traditional and modern marketing stimuli on restaurant choice intention through the mediating role of perceived value. Our study also actively contributes to the ongoing multigenerational research stream by affirming the moderation role of generations (Gen Y and Gen Z) in those relationships.

The literature that is presently available on sustainable supply chain management (SSCM) combining optimization and industry 4.0 techniques falls short in its depictions of the recent developments, budding pertinent areas and the importance of SSCM in the growth of industrial economies around the world. This article's main objective is to analyze current trends, highlight the latest initiatives and perform a meta-analysis of the literature that is currently accessible in the SSCM area with a special focus on optimization and industry 4.0 techniques. The paper also proposes a conceptual framework that will assist in illuminating how the ideas of optimization and industry 4.0 may contribute to realizing sustainability in supply chains.

The proposed study systematically reviews 85 research publications published between 2010 and 2022 in referenced peer-reviewed journals in diverse fields, including engineering, business and management, services and healthcare. Numerous categories are considered throughout the examination of the literature, including year-wise publications, prominent journals, type of research design, concerned industry and research technique used.

The study demonstrates a deeper comprehension of the literature in the field and its evolution throughout numerous industry sectors, which is helpful for both practitioners and academics. The results from the content analysis highlight various future research opportunities in the domain.

This is one of the first research articles that have attempted to establish, analyze and highlight the current trends and initiatives in the SSCM domain from an optimization and industry 4.0 techniques viewpoint. The cluster-based future research propositions also enhance the novelty of the study.

Given the limited literature on depression as a contributing factor to compulsive social media use, the present research examines the role of perceived depressive mood (PDM) in developing compulsive social media use behavior. The authors also identify and hypothesize channels such as contingent self-esteem (CSE), social interaction anxiety (SIA) and fear of negative evaluation (FNE), which may explain how PDM affects compulsive social media use.

The research model was empirically tested with a survey of 367 Chinese university students using structural equation modeling by drawing on the escape and self-presentation lenses.

The findings indicate that PDM contributes to compulsive social media use behavior both directly and indirectly through CSE. Furthermore, the impact of CSE on compulsive social media use is mediated by the FNE, whereas SIA fails to mediate this effect.

The results can advance the authors’ knowledge of the role and process by which depressive mood impacts compulsive social media use. These findings may add insights into psychological treatment and help in, for example, developing counseling programs or coping strategies for depressed people to protect them from using social media excessively.

This research identifies the pathway mechanism between PDM and compulsive use of social media. It also increases the understanding of how CSE and social interaction deficiencies contribute to compulsive social media usage (CSMU).

This paper aims to compare the wear behavior, surface roughness, friction coefficient and volume loss of high-velocity oxy-fuel (HVOF) sprayed WC–Co and WC–Cr₃C₂–Ni coatings on AISI 1095 steel with spraying times of 10 and 15 s.

In this study, the pin-on-disc testing technique was used to evaluate the wear characteristics at a speed of 0.24 m/s, load of 40 N and test time of 60 min under dry conditions at room temperature. The wear characteristics were examined and analyzed by scanning electron microscopy and energy dispersive X-ray spectroscopy. The surface roughness of a coated surface was measured, and microhardness measurements were performed on the cross-sectioned and polished surfaces of the coating.

Spraying time and powder material affected the hardness of HVOF coatings due to differences in the porosity of the coated layers. The average hardness of the WC–Cr₃C₂–Ni coating with a spaying time of 15 s was approximately 14% higher than that of the WC–Cr₃C₂–Ni coating with a spraying time of 10 s. Under an applied load of 40 N, the WC–Co coating with a spraying time of 15 s had the lowest variation in the friction coefficient compared with the other coatings. The WC–Co coating with a spraying time of 10 s had the lowest average and variation in volume loss compared to the other coatings. The WC–Cr₃C₂–Ni coating with a spraying time of 10 s exhibited the highest average volume loss. The wear features changed slightly with the spraying time owing to variations in the hardness and friction coefficient.

This study investigated tribological performance of WC–Co; WC-Cr₃C₂-Ni coatings with spraying times of 10 and 15 s using pin-on-disc tribometer by rotating the relatively soft pin (C45 steel) against hard coated substrate (disc).

Recently, there has been a shift toward the embodied energy assessment of buildings. However, the impact of material service life on the life-cycle embodied energy has received little attention. We aimed to address this knowledge gap, particularly in the context of the UAE and investigated the embodied energy associated with the use of concrete and other materials commonly used in residential buildings in the hot desert climate of the UAE.

Using input–output based hybrid analysis, we quantified the life-cycle embodied energy of a villa in the UAE with over 50 years of building life using the average, minimum, and maximum material service life values. Mathematical calculations were performed using MS Excel, and a detailed bill of quantities with >170 building materials and components of the villa were used for investigation.

For the base case, the initial embodied energy was 57% (7390.5 GJ), whereas the recurrent embodied energy was 43% (5,690 GJ) of the life-cycle embodied energy based on average material service life values. The proportion of the recurrent embodied energy with minimum material service life values was increased to 68% of the life-cycle embodied energy, while it dropped to 15% with maximum material service life values.

The findings provide new data to guide building construction in the UAE and show that recurrent embodied energy contributes significantly to life-cycle energy demand. Further, the study of material service life variations provides deeper insights into future building material specifications and management considerations for building maintenance.

The purpose of this paper is to examine the factors that influence older adults' intention to use virtual fitting room technology during the COVID-19 pandemic based on the extended technology acceptance model (TAM).

An online survey was conducted with a sample of older adults from 60 to 90 years old (n = 819). A structural equation modeling was conducted to test a proposed research model.

The results revealed that older adults' behavioral intentions were positively influenced by perceived usefulness and ease of use, and fear of infection during the pandemic was significantly related to the perceived usefulness. Fit concern was not significantly related to perceived usefulness of virtual fitting room technology.

This research extends the TAM by adding antecedents to perceived usefulness in explaining older adults' adoption of virtual fitting technology.

The present study is performed to identify the propagation mechanism of the ripple effect as well as examine the simultaneous impact of risks on supply chain (SC) performance.

A theoretical framework with many hypotheses regarding the relationships between SC risk types and performance is established. The data are collected from a large-scale survey supported by a project of the Japanese government to promote sustainable socioeconomic development for the Association of Southeast Asian Nations (ASEAN) region, with the participation of 207 firms. Structural equation modeling (SEM) is used to test the hypotheses of the theoretical framework.

It is indicated that human-made risk causes operational risk, while natural risk causes both supply risk and operational risk. Furthermore, the impacts of human-made risk and natural risk on performance are amplified through operational risk.

This study is one of the first attempts that identifies the propagation mechanism of the ripple effect and examines the simultaneous impact of risks on performance in construction SCs.

Although many studies on risk management in construction SCs have been carried out, they mainly focus on risk identification or quantification of risk impact. It is observed that research on the ripple effect of disruptions has been very scarce.

Little is known about the determinants of supply chain finance (SCF) adoption among small and medium-sized enterprises (SMEs) in developing countries. This study aims to address this relevant research gap and hence, draws on the resource-based view and transaction cost economies to empirically investigate five factors that make SCF adoption practicable among SMEs in Ghana.

The approach involves a sample of 257 SME managers/owners and modelling via structural equations modelling.

All five factors (innovative capability, information sharing, inter- and intra-firm collaboration, external financing and trade process digitization) were found to impact positively and significantly on SCF adoption. The findings provide SME managers/owners with a research model which guides them on how to settle the SCF process.

This paper used a cross-sectional survey, which makes it impossible to access changes over time. In addition, the use of quantitative method limits respondents from expressing their feelings fully. Using a mixed or qualitative methodology will provide avenues for future research.

This paper offers a completive advantage for Ghanaian SMEs to strengthen their relationships while collaborating with each other. The findings suggest that by adopting SCF solutions, SMEs can optimize their liquidity and working capital. The factors underpinning SCF adoption are of incredible attractiveness for SME managers/owners to discover the relevant practice of SCF solutions. SMEs should adopt SCF strategies for improving their capability to respond promptly to transactions.

This paper is among the few papers that have examined these five factors in a developing economy context. The study also provides new understanding of the factors that influence SCF adoption in the context of a developing economy.