Search results

A new coupled model is developed to simulate the interaction between fluid droplet collisions on discrete particles (DPs) by using mathematic function.

In this model, the smoothed particle hydrodynamics (SPH) is used based on the kernel function and the time step which takes into consideration to the fluid domain in accordance with the discrete element method (DEM) with resistance function. The interaction between fluid and DPs consists of three parts, which are repulsive force, viscous shear force and attractive force caused by the capillary action. The numerical simulation of droplet collision on DPs presents the whole process of droplet motion. Otherwise, an experimental data were conducted to record the realistic process for verification.

The comparison result indicated that the numerical simulation is capable of capturing the entire process for droplet collision on DPs.

However, based on the difference of experimental environment, type of the DP and setups, the maximum spreading dimeters of could not fit the experimental data exactly.

In sum, the coupled SPH-DEM method simulation shows that the coupled model of SPH-DEM developed an entire effectiveness process for fluid–solid interaction problem.

This study aims to reveal how mobile app stickiness is formed and how the stickiness formation process differs for apps of different social levels.

This study proposed and validated a stickiness formation model following the cognitive–affective–conative framework. Data were collected from surveys of 1,240 mobile app users and analyzed using structural equation modeling. Multigroup analysis was applied to contrast the stickiness formation process among apps of different social levels.

This study revealed a causal link between cognitive, affective and conative factors. It found partial mediation effects of trust in the association between perceptions and satisfaction, and the full mediation role of satisfaction and personal investment (PI) in the effects of subjective norm (SN) on stickiness. The multigroup analysis results suggested that social media affordances benefit stickiness through increased PI and strengthened effects of SN on PI. However, it damages stickiness through increased perceived privacy risk (PPR), decreased trust and strengthened effects of PPR on trust.

This study contributes to both stickiness scholars and practitioners, as it builds a model to understand the stickiness formation process and reveals the effects of the “go social” strategy. The novelty of this study is that it examined social influences, considered privacy issues and revealed two mediation mechanisms. The findings can guide the improvement of mobile app stickiness and the application of the “go social” strategy.

Propose a more comprehensive explanation on the determinants and fluctuations of China’s exchange rate policy in the past decade (2005–2015).

Case study on China’s exchange rate policies in three respective stages since 2005 and then a comparative study on these three stages.

Put forward a two-pronged explanation on the determinants and fluctuations of China’s exchange rate policy in the past decade and arrive at three specific conclusions. First, external pressure is only one factor among many influencing the formation of China’s national interests (Guojia Liyi in Chinese) and the decision-making process on exchange rate policy. Second, national interest is the fundamental driving force and substratum for making China’s exchange rate policy. Third, in the short term, the specific exchange rate policies in different periods were not always in accordance to the national interests (or Guojia Liyi), due to the influences of some factors on the decision-making environment.

The comprehensive view is conducive to better explaining the formation and fluctuations of China’s exchange rate policy and consequently contributes to understanding and even predicting future policies.

The dispersity of graphene oxide (GO) has an important effect on the properties of epoxy resin (EP) composites. Many modification and dispersion methods require the use of inert solvents which do not participate in the modification reaction, although GO can be uniformly dispersed in water and alcohol solvents. Based on this requirement, several inert solvents were selected as dispersion solvents to find out the suitable inert solvent for GO dispersion into EP matrix.

Several inert solvents with different solubility parameters were selected as dispersion solvents to prepare GO/EP composite. The microstructure, mechanical properties, insulation properties, dielectric properties and thermal property of the composite were characterized, which was due to find suitable inert solvent for GO dispersion into EP matrix.

The dispersity of N, N-dimethylformamide (DMF) was the best stable suspension state when it was used as solvent instead of occurring sedimentation and agglomeration. Moreover, DMF was further confirmed as a suitable inert solvent for the dispersion of GO into EP according to the mechanical properties, insulation properties and thermal conductivity characterization.

The dispersion of GO in solvents has already been researched, but the traditional solvents, such as alcohols and water, has shown their limitations with the increase of modification methods, which were not suitable for the modification environment such as cyanate graft modification. Therefore, it was very important to choose a kind of inert solvent for dissolving EP matrix and dispersing GO better.

Several inert solvents were used to disperse GO into EP, and the influence of different dispersing solvents on the adhesive was discussed through the analysis of the mechanical properties, insulation properties and thermal conductivity, which was due to explore the inert solvent suitable for GO dispersion.

A kind of the Z-6020/E-44 modified waterborne hydroxyl acrylate resin (Z-WEA) and its application in volatile organic compound-free waterborne coatings were prepared.

The Z-6020/E-44 modified waterborne hydroxyl acrylate resin (Z-WEA) was obtained dropwise by adding a mixed solution of methyl methacrylate, n-butyl acrylate, hydroxyethyl methacrylate, acrylic acid and an initiator into a pre-prepared solution of isopropyl alcohol and E-44 and by semi-continuous solution polymerization, and this chain was further extended with organosiloxane (Z-6020) through graft copolymer, which was then neutralized with organic base and dispersed with water, with waterborne amino resin curing agent to form a film, and the properties were tested.

The results showed that when the dosage of initiator was 2.5% accounts for the total acrylic monomer, the hydroxyl content was 10%; the dosage of E-44 was 16%; the dosage of Z-6020 was 6%; the mass ratio of hard and soft monomer was 2.0:1; the neutralization was 100%; Z-6020/E-44 modified waterborne hydroxyl acrylate resin (Z-WEA) had excellent dispersion performance in water and storage stability; water absorption of cured film was 7.8%; pencil hardness reached 5H; adhesive force was 1 level; and the film was uniform and endowed with remarkable heat resistance, high gloss and good fullness.

This paper established a method to synthesize Z-6020/E-44 modified waterborne hydroxyl acrylate resin (Z-WEA) with green surfactants that can be used in the coatings, adhesives, finishing agents and so on.

This paper provides a method of preparing Z-6020/E-44 modified waterborne hydroxyl acrylate resin (Z-WEA) and with waterborne amino resin curing agent to form a film, and the film is uniform and endowed with remarkable heat resistance, high gloss and good fullness and meets the requirements of high-grade paint.