Search results

The purpose of this research is to develop a generic framework of a digital twin (DT)-based automated construction progress monitoring through reality capture to extended reality (RC-to-XR).

IDEF0 data modeling method has been designed to establish an integration of reality capturing technologies by using BIM, DTs and XR for automated construction progress monitoring. Structural equation modeling (SEM) method has been used to test the proposed hypotheses and develop the skill model to examine the reliability, validity and contribution of the framework to understand the DRX model's effectiveness if implemented in real practice.

The research findings validate the positive impact and importance of utilizing technology integration in a logical framework such as DRX, which provides trustable, real-time, transparent and digital construction progress monitoring.

DRX system captures accurate, real-time and comprehensive data at construction stage, analyses data and information precisely and quickly, visualizes information and reports in a real scale environment, facilitates information flows and communication, learns from itself, historical data and accessible online data to predict future actions, provides semantic and digitalize construction information with analytical capabilities and optimizes decision-making process.

The research presents a framework of an automated construction progress monitoring system that integrates BIM, various reality capturing technologies, DT and XR technologies (VR, AR and MR), arraying the steps on how these technologies work collaboratively to create, capture, generate, analyze, manage and visualize construction progress data, information and reports.

Initiated by the service user movement, recovery-oriented practices are one of the keystones of modern mental health care. Over the past two decades, substantial gains have been made with introducing recovery-oriented practice in many areas of mental health practice, but there remain areas where progress is delayed, notably, the psychiatric inpatient environment. The peer support workforce can play a pivotal role in progressing recovery-oriented practices. The purpose of this paper is to provide a pragmatic consideration of how occupational therapists can influence mental health systems to work proactively with a peer workforce.

The authors reviewed current literature and considered practical approaches to building a peer workforce in collaboration with occupational therapists.

It is suggested that the peer support workforce should be consciously enhanced in the inpatient setting to support culture change as a matter of priority. Occupational therapists working on inpatient units should play a key role in promoting and supporting the growth in the peer support workforce. Doing so will enrich the Occupational Therapy profession as well as improving service user outcomes.

This paper seeks to provide a pragmatic consideration of how occupational therapists can influence mental health systems to work proactively with a peer workforce.

COVID-19 has changed the way we teach and learn, including service-learning (S-L). This study examines the impacts of the work-from-home (WFH) mode on the work performance and learning outcomes of student interns on an eight-week S-L internship programme, and the key factors in terms of its success.

A qualitative research methodology is adopted by interviewing nine student interns and four supervisors from three community partner organisations (CPOs) to understand their experiences of how the WFH mode has impacted intern work performance and learning outcomes. Thematic analysis is used for the data analysis.

The interns uncover a number of negative WFH impacts on the S-L internship, including ineffective communication and management practice, low work efficiency and quality, a lack of task variety and learning opportunities and distractions in the home environment. Furthermore, five critical factors for WFH success are also identified, including prior preparation, effective communication systems, personal motivators at work, the nature of the job in relation to it being suited to the WFH mode, and organisational support.

The study examines impacts on student work performance and learning outcomes in an S-L summer internship programme operating under the WFH mode as a result of the COVID-19 pandemic. Key success factors and practical recommendations have been developed for enhancing the future success of S-L internships operating under the WFH mode.

The purpose of this paper is to discuss a production planning and control model known as the Lean construction management (LCM) model, which applies a number of visual tools in a systematic way to the planning and control process. The application of the visual tools in this way facilitates the flow of information, thus improving transparency between the interfaces of planning, execution and control.

Design Science research is adopted for this investigation, which analyses the original development of the model and reports on its testing and refinement over different types of projects. The research is divided into three parts, each part focussing on a different stage of development and construction project type.

The main findings are related to the benefits of visual management in the construction planning and control process, such as maintaining consistency between different planning levels, so that feasible execution plans are created; control becomes more focussed on prevention rather than correction, and creates opportunities for collaborative problem solving. Moreover, the physical display of the visual tools in a discrete planning area on-site encourages a regular exchange between participants on actual work progress as it unfolds, leading to more timely reaction to the problems at hand.

The problem of a lack of transparency in construction planning and control leads to communication issues on-site, poor process orientation and high levels of waste. LCM improves process transparency by making information related to system-wide processes more readily available to project participants. This enables them to foresee problems in a timely manner and to take necessary measures to resolve them or to adapt the process to current circumstances. The LCM model proposes a new way of applying visual tools and controls systematically to improve transparency in construction planning and control.

The purpose of this paper is to propose a model for planning and controlling the design process in companies that design, manufacture and assemble prefabricated engineer-to-order (ETO) building systems. This model was devised as an adaptation of the Last Planner® System for ETO multiple-project environments.

Design science research, also known as prescriptive research, was the methodological approach adopted in this research. An empirical study was carried out at the design department of a leading steel fabricator from Brazil, in which the proposed model was implemented in six different design teams.

The main benefits of the proposed model were shielding design work from variability, encouraging collaborative planning, creating opportunities for learning, increasing process transparency, and flexibility according to project status. Two main factors affected the effectiveness of the implementation process commitment and leadership of design managers, and training on design management and project planning and control core concepts and practices.

Some limitations were identified in the implementation process: similarly to some previous studies (Ballard, 2002; Codinhoto and Formoso, 2005), the success of constraint analysis was still limited; some of the metrics produced (e.g. ABI, causes of planning failures) have not been fully used for process improvement; and systematic feedback about project status was not properly implemented and tested.

The main contributions of this study in relation to traditional design planning and control practices are related to the use of two levels of look-ahead planning, the introduction of a decoupling point between conceptual and detail design, the proposition of new metrics for the Last Planner® System, and understanding the potential role of visual management to support planning and control.

A comprehensive intervention test platform, Valla Coach, including quantitative and qualitative methods to measure and improve work flows on site and promote coaching and collective learning has been developed jointly by researchers and practitioner. The study aims to describe the methodological underpinning of the platform, and discusses the preliminary results and implications.

Expansive Learning Theory grounded in a cultural–historical perspective underpins the conceptual realisation of the test platform. The viability of the platform was tested in four contextually different construction sites (and contractors), combining established and new measurement tools, qualitative intervention approaches and coaching according to the production challenges at hand.

Valla Coach created a space on site where researchers-as-coaches and operatives converged to co-construct (new) knowledge and learn together. The knowledge that emerged from the interactions gained legitimacy through its situatedness and practical value for the operatives.

Valla Coach provides opportunities for researchers and practitioners to probe the taken-for-granted. Moreover, a variety of methods and tools are tested in different contexts. The interventions prompt questioning of assumptions and make contradictions visible. Valla Coach remains work-in-progress and needs further evaluation and validation.

We contribute insights from negotiating socio-technical complexities, evaluating digital measurement tools and technologies and experiences of operatives. Tensions at the interface between the organisation and project are rendered visible.

A bottom–up approach that is a combination of practice-based tools and methods and of theories of learning and sustainable and continuous improvements where the operators are the main actors that enable productive activity.

This chapter insists that evaluation of the process and results of cocreation is a precondition for continuous improvement and helps maintain support from external sponsors and funders. The main benefits of systematic evaluation of cocreation are learning and legitimacy rather than control and allocation. The chapter scrutinizes the two most common evaluation tools, formative and summative evaluation, and finds that they both fail to appreciate the emergent character of cocreation processes. The solution to this problem is to supplement formative and summative evaluation with developmental evaluation, which prompts the participating actors to engage in a critical interrogation of what they are doing, the reasons for doing it, and the results they achieve. Finally, the chapter explains how the commitment of developmental evaluation to using real-time data in the evaluation of change theories can be pursued through a collective impact strategy.

Effective use of data across public health organisations (PHOs) is essential for the provision of health services. While health technology and data use in clinical practice have been investigated, interactions with data in non-clinical practice have been largely neglected. The purpose of this paper is to consider what constitutes data, and how people in non-clinical roles in a PHO interact with data in their practice.

This mixed methods study involved a qualitative exploration of how employees of a large PHO interact with data in their non-clinical work roles. A quantitative survey was administered to complement insights gained through qualitative investigation.

Organisational boundaries emerged as a defining issue in interactions with data. The results explain how data work happens through observing, spanning and shifting of boundaries. The paper identifies five key issues that shape data work in relation to boundaries. Boundary objects and processes are considered, as well as the roles of boundary spanners and shifters.

The study was conducted in a large Australian PHO, which is not completely representative of the unique contexts of similar organisations. The study has implications for research in information and organisational studies, opening fields of inquiry for further investigation.

Effective systems-wide data use can improve health service efficiencies and outcomes. There are also implications for the provision of services by other health and public sectors.

The study contributes to closing a significant research gap in understanding interactions with data in the workplace, particularly in non-clinical roles in health. Research analysis connects concepts of knowledge boundaries, boundary spanning and boundary objects with insights into information behaviours in the health workplace. Boundary processes emerge as an important concept to understand interactions with data. The result is a novel typology of interactions with data in relation to organisational boundaries.

This paper aims to explore graduate perspectives about the creation and use of professional artefacts to communicate work-based inquiry projects to professional audiences.

The study was based on constructivist qualitative interviews with 14 graduates from a part-time professional practice in arts programme and used thematic analysis to interpret and discuss the findings.

Participants indicated a perceived value in the use of the professional artefact as a way of articulating their professional inquiry. Professional artefacts enable essential communication skills for professional contexts, have the capacity for engaging with professional audiences that are external to the university, have the potential for enabling further study and workplace employability, show awareness of project management and leadership capabilities and helped some individuals build on and share their own personal philosophy of practice with peer professionals.

As a small-scale research project that used purposive sampling, the findings are not representative, but could provide the creative means to develop professional artefacts within work-related educational programmes and workplace learning programmes.

It is argued that the process and production of professional artefacts can provide the means for communicating work-based projects to professional audiences within workplace settings.

Professional artefacts explore and present developmental aspects of work-based inquiries with distinctive creative approaches to favour practice knowledge and innovation that can be expressively shared with peer professionals.