Search results

Environmental degradation resulting from human activities may adversely affect human health in multiple ways. Until now, policies aimed at mitigating environmental problems such as climate change, environmental pollution and damage to biodiversity have failed to clearly identify and drive the potential benefits of these policies on health. The conducted study assesses and demonstrates how specific environmental policies and instruments influence perceived human health in order to ensure input for a data-driven decision process.

The study was conducted for the 2004–2020 period in European Union (EU) countries with the use of dynamic panel data modeling. Verification of specific policies' impact on dependent variables allows to indicate this their effectiveness and importance. As a result of the computed dynamic panel data models, it has been confirmed that a number of significant and meaningful relationships between the self-perceived health index and environmental variables can be identified.

There is a strong positive impact of environmental taxation on the health index, and the strength of this relationship causes effects to be observed in the very short term, even the following year. In addition, the development of renewable energy sources (RES) and the elimination of fossil fuels from the energy mix exert positive, although milder, effects on health. The reduction of ammonia emissions from agriculture and reducing noise pollution are other health-supporting factors that have been shown to be statistically valid. Results allow to identify the most efficient policies in the analyzed area in order to introduce those with the best results or a mix of such measures.

The results of the authors' research clearly indicate the health benefits of measures primarily aimed at improving environmental factors, such as environmental taxes in general. The authors have also discovered an unexpected negative impact of an increase in the share of energy taxes in total taxes on the health index. The presented study opens several possibilities for further investigation, especially in the context of the rapidly changing geopolitical environment and global efforts to respond to environmental and health challenges. The authors believe that the outcome of the authors' study may provide new arguments to policymakers pursuing solutions that are not always easily acceptable by the public.

Strategic flexibility (SF) has become increasingly important for firms because of the fast changes in the external environment. In line with the practical importance of SF, an emerging research field has developed around it that has attempted to understand the nature of SF and the key relationships. The aim of this study is to unveil the semantic structure of the recent literature on SF and to suggest new promising areas for future research.

The authors conduct a systematic literature review with a bibliographic analysis technique, which allows authors to identify the main recent streams in the literature, as well as offer reflections and suggestions for future research.

The authors uncover three main emerging areas in the research on SF, namely SF as a dynamic capability, the role of knowledge management for SF and the relationship between a firm SF and the external environment. The authors put forward three avenues for future research on SF: Avenue 1. SF, business model innovation (BMI) and other dynamic capabilities (DC), Avenue 2. Digital technologies and SF/organizational agility and Avenue 3. SF and sustainability. Articles included in the special issue entitled “A strategic perspective on flexibility, agility and adaptability in the digital era” contribute to Avenue 2, thus paving the way for filling some of the identified gaps regarding the relationship between SF and digitalization.

To the best of authors’ knowledge, this is the first literature review on SF that uses a bibliometric approach to draw conclusions on the findings in the literature. The review contributes to the theoretical understanding of SF by illustrating and explicating core topics that have persisted over time, as well as by presenting three main avenues for further developing authors’ knowledge around SF.

The study employs two independent experimental studies to collect data. It focuses on the matching effect between advertising appeals and product types. The Elaboration Likelihood Model serves as the theoretical framework for understanding the cognitive processing involved in consumers' responses to these advertising appeals and product combinations.

This paper aims to investigate the impact of advertising appeals on consumers' intentions to purchase organic food. We explored the interaction between advertising appeals (egoistic vs altruistic) and product types (virtue vs vice) and purchase intention. The goal is to provide insights that can enhance the advertising effectiveness of organic food manufacturers and retailers.

The analysis reveals significant effects on consumers' purchase intentions based on the matching of advertising appeals with product types. Specifically, when egoistic appeals align with virtuous products, there is an improvement in consumers' purchase intentions. When altruistic appeals match vice products, a positive impact on purchase intention is observed. The results suggest that the matching of advertising appeals with product types enhances processing fluency, contributing to increased purchase intention.

This research contributes to the field by providing nuanced insights into the interplay between advertising appeals and product types within the context of organic food. The findings highlight the importance of considering the synergy between egoistic appeals and virtuous products, as well as altruistic appeals and vice products. This understanding can be strategically employed by organic food manufacturers and retailers to optimize their advertising strategies, thereby improving their overall effectiveness in influencing consumers' purchase intentions.

This article summarizes the international scientific research output of global forest product models, infers future research trends and provides reference for quantitative analysis and mathematical modeling of Chinese forest product problems, with the aim of contributing to promoting domestic production of Chinese forest products and strengthening international trade competitiveness of forest products.

In 1999, Joseph Buongiorno, a scholar at the University of Wisconsin in the United States of America, proposed the global forest products model (GFPM), which was first applied to research in the global forestry sector. GFPM is a recursive dynamic model based on five assumptions: macroeconomics, local equilibrium, dynamic equilibrium, forest product conversion flow and trade inertia. Using a certain year from 1992 to present as the base period, it simulates and predicts changes in prices, production and import and export trade indicators of 14 forest products in 180 countries (regions) through computer programs. Its advantages lie in covering a wide range of countries and a wide variety of forest products. The data mainly include forest resource data, forest product trade data, and other economic data required by the model, sourced from the Food and Agriculture Organization (FAO) of the United Nations and the World Bank, respectively.

Compared to international quantitative and modeling research in the field of forest product production and trade, China's related research is not comprehensive and in-depth, and there is not much quantitative and mathematical modeling research, resulting in a significant gap. This article summarizes the international scientific research output of global forest product models, infers future research trends, and provides reference for quantitative analysis and mathematical modeling of Chinese forest product problems, with the aim of contributing to promoting domestic production of Chinese forest products and strengthening international trade competitiveness of forest products.

On the basis of summarizing and analyzing the international scientific research output of GFPM, sorting out the current research status and progress at home and abroad, this article discusses potential research expansion directions in 10 aspects, including the types, yield and quality of domestic forest product production, international trade of forest products, and external impacts on the forestry system, in order to provide new ideas for global forest product model research in China.

This paper delves into cross-border E-business, unraveling its intricate dynamics and forecasting its future trajectory.

This paper projects the prospective market size of cross-border E-business in China for the year 2023 using the GM (1,1) gray forecasting model. Furthermore, to enhance the analysis, the paper attempts to simulate and forecast the size of China’s cross-border E-business sector using the GM (1,3) gray model. This extended model considers not only the historical trends of cross-border E-business but also the growth patterns of GDP and the digital economy.

The forecast indicates a market size of 18,760 to 18,934 billion RMB in 2023, aligning with the consistent growth observed in previous years. This suggests a sustained positive trajectory for cross-border E-business.

Cross-border e-commerce critically shapes China’s global integration and traditional industry development. The research in this paper provides insights beyond statistical trends, contributing to a nuanced understanding of the pivotal role played by cross-border e-commerce in shaping China’s economic future.

In recent years, there has been significant interest in adopting XR (extended reality) technologies such as VR (virtual reality) and AR (augmented reality), particularly in retail. However, extending activities through reality-mediation is still mostly believed to offer an inferior experience due to their shortcomings in usability, wearability, graphical fidelity, etc. This study aims to address the research gap by experimentally examining the acceptance of metaverse shopping.

This study conducts a 2 (VR: with vs. without) × 2 (AR: with vs. without) between-subjects laboratory experiment involving 157 participants in simulated daily shopping environments. This study builds a physical brick-and-mortar store at the campus and stocked it with approximately 600 products with accompanying product information and pricing. The XR devices and a 3D laser scanner were used in constructing the three XR shopping conditions.

Results indicate that XR can offer an experience comparable to, or even surpassing, traditional shopping in terms of its instrumental and hedonic aspects, regardless of a slightly reduced perception of usability. AR negatively affected perceived ease of use, while VR significantly increased perceived enjoyment. It is surprising that the lower perceived ease of use appeared to be disconnected from the attitude toward metaverse shopping.

This study provides important experimental evidence on the acceptance of XR shopping, and the finding that low perceived ease of use may not always be detrimental adds to the theory of technology adoption as a whole. Additionally, it provides an important reference point for future randomized controlled studies exploring the effects of technology on adoption.

This paper aims to define the efficiency achieved by urban transport companies in Spain concerning the resources they use, considering the type of management used for implementation, public-private, and size.

This study consisted of an analysis of the efficiency of 229 public-private urban transport operators during the period 2012–2021 using Data Envelopment Analysis, the Malmquist Index and inference estimators to determine productivity, efficiency change into Pure Technical Efficiency Change (PTECH), and scale efficiency change.

Based on the efficiency analysis, the authors concluded that of the 229 companies studied, more than 35 were inefficient in all analysed periods. Considering the sample used, direct management is considered significantly more efficient. It cannot be concluded that the size of these companies influences their efficiency, as the data show unequal development behaviours in the studied years.

This study provides arguments on whether there is a significant difference between the two types of management in the urban transport sector. It also includes firm size as a study variable, which has not been previously considered in other studies related to urban transport efficiency. Efficiency should be a crucial factor in determining funding allocation in this sector, as it encourages operators to optimize and improve their services.

This paper provides practical advice for archaeologists and heritage specialists wishing to use ML approaches to identify archaeological features in high-resolution satellite imagery (or other remotely sensed data sources). We seek to balance the disproportionately optimistic literature related to the application of ML to archaeological prospection through a discussion of limitations, challenges and other difficulties. We further seek to raise awareness among researchers of the time, effort, expertise and resources necessary to implement ML successfully, so that they can make an informed choice between ML and manual inspection approaches.

Automated object detection has been the holy grail of archaeological remote sensing for the last two decades. Machine learning (ML) models have proven able to detect uniform features across a consistent background, but more variegated imagery remains a challenge. We set out to detect burial mounds in satellite imagery from a diverse landscape in Central Bulgaria using a pre-trained Convolutional Neural Network (CNN) plus additional but low-touch training to improve performance. Training was accomplished using MOUND/NOT MOUND cutouts, and the model assessed arbitrary tiles of the same size from the image. Results were assessed using field data.

Validation of results against field data showed that self-reported success rates were misleadingly high, and that the model was misidentifying most features. Setting an identification threshold at 60% probability, and noting that we used an approach where the CNN assessed tiles of a fixed size, tile-based false negative rates were 95–96%, false positive rates were 87–95% of tagged tiles, while true positives were only 5–13%. Counterintuitively, the model provided with training data selected for highly visible mounds (rather than all mounds) performed worse. Development of the model, meanwhile, required approximately 135 person-hours of work.

Our attempt to deploy a pre-trained CNN demonstrates the limitations of this approach when it is used to detect varied features of different sizes within a heterogeneous landscape that contains confounding natural and modern features, such as roads, forests and field boundaries. The model has detected incidental features rather than the mounds themselves, making external validation with field data an essential part of CNN workflows. Correcting the model would require refining the training data as well as adopting different approaches to model choice and execution, raising the computational requirements beyond the level of most cultural heritage practitioners.

Improving the pre-trained model’s performance would require considerable time and resources, on top of the time already invested. The degree of manual intervention required – particularly around the subsetting and annotation of training data – is so significant that it raises the question of whether it would be more efficient to identify all of the mounds manually, either through brute-force inspection by experts or by crowdsourcing the analysis to trained – or even untrained – volunteers. Researchers and heritage specialists seeking efficient methods for extracting features from remotely sensed data should weigh the costs and benefits of ML versus manual approaches carefully.

Our literature review indicates that use of artificial intelligence (AI) and ML approaches to archaeological prospection have grown exponentially in the past decade, approaching adoption levels associated with “crossing the chasm” from innovators and early adopters to the majority of researchers. The literature itself, however, is overwhelmingly positive, reflecting some combination of publication bias and a rhetoric of unconditional success. This paper presents the failure of a good-faith attempt to utilise these approaches as a counterbalance and cautionary tale to potential adopters of the technology. Early-majority adopters may find ML difficult to implement effectively in real-life scenarios.

Unlike many high-profile reports from well-funded projects, our paper represents a serious but modestly resourced attempt to apply an ML approach to archaeological remote sensing, using techniques like transfer learning that are promoted as solutions to time and cost problems associated with, e.g. annotating and manipulating training data. While the majority of articles uncritically promote ML, or only discuss how challenges were overcome, our paper investigates how – despite reasonable self-reported scores – the model failed to locate the target features when compared to field data. We also present time, expertise and resourcing requirements, a rarity in ML-for-archaeology publications.

Petroleum hydrocarbons are naturally occurring flammable fossil fuels used as conventional energy sources. It has carcinogenic, mutagenic properties and is considered a hazardous pollutant. Soil contaminated with petroleum hydrocarbons adversely affects the properties of soil. This paper aim to remove pollutants from the environment is an urgent need of the hour to maintain the proper functioning of soil ecosystems.

The ability of micro-organisms to degrade petroleum hydrocarbons makes it possible to use these microorganisms to clean the environment from petroleum pollution. For preparing this review, research papers and review articles related to petroleum hydrocarbons degradation by micro-organisms were collected from journals and various search engines.

Various physical and chemical methods are used for remediation of petroleum hydrocarbons contaminants. However, these methods have several disadvantages. This paper will discuss a novel understanding of petroleum hydrocarbons degradation and how micro-organisms help in petroleum-contaminated soil restoration. Bioremediation is recognized as the most environment-friendly technique for remediation. The research studies demonstrated that bacterial consortium have high biodegradation rate of petroleum hydrocarbons ranging from 83% to 89%.

Proper management of petroleum hydrocarbons pollutants from the environment is necessary because of their toxicity effects on human and environmental health.

This paper discussed novel mechanisms adopted by bacteria for biodegradation of petroleum hydrocarbons, aerobic and anaerobic biodegradation pathways, genes and enzymes involved in petroleum hydrocarbons biodegradation.

Polymer laser powder bed fusion (PBF-LB/P) is an additive manufacturing technology that is sustainable due to the possibility of recycling the powder multiple times and allowing the fabrication of gears without the aid of support structures and subsequent assembly. However, there are constraints in the process that negatively affect its adoption compared to other additive technologies such as material extrusion to produce gears. This study aims to demonstrate that it is possible to overcome the problems due to the physics of the process to produce accurate mechanism.

Technological aspects such as orientation, wheel-shaft thicknesses and degree of powder recycling were examined. Furthermore, the evolving tooth profile was considered as a design parameter to provide a manufacturability map of gear-based mechanisms.

Results show that there are some differences in the functioning of the gear depending on the type of powder used, 100% virgin or 50% virgin and 50% recycled for five cycles. The application of a groove on a gear produced with 100% virgin powder allows the mechanism to be easily unlocked regardless of the orientation and wheel-shaft thicknesses. The application of a specific evolutionary profile independent of the diameter of the reference circle on vertically oriented gears guarantees rotation continuity while preserving the functionality of the assembled mechanism.

In the literature, there are various studies on material aging and reuse in the PBF-LB/P process, mainly focused on the powder deterioration mechanism, powder fluidity, microstructure and mechanical properties of the parts and process parameters. This study, instead, was focused on the functioning of gears, which represent one of the applications in which this technology can have great success, by analyzing the two main effects that can compromise it: recycled powder and vertical orientation during construction.