Search results

Solar cells could make textile-based wearable systems energy independent without the need for battery replacement or recharging; however, their laundry resistance, which is prerequisite for the product acceptance of e-textiles, has been rarely examined. This paper aims to report a systematic study of the laundry durability of solar cells embedded in textiles.

This research included small commercial monocrystalline silicon solar cells which were encapsulated with functional synthetic textile materials using an industrially relevant textile lamination process and found them to reliably endure laundry washing (ISO 6330:2012). The energy harvesting capability of eight textile laminated solar cells was measured after 10–50 cycles of laundry at 40 °C and compared with light transmittance spectroscopy and visual inspection.

Five of the eight textile solar cell samples fully maintained their efficiency over the 50 laundry cycles, whereas the other three showed a 20%–27% decrease. The cells did not cause any visual damage to the fabric. The result indicates that the textile encapsulated solar cell module provides sufficient protection for the solar cells against water, washing agents and mechanical stress to endure repetitive domestic laundry.

This study used rigid monocrystalline silicon solar cells. Flexible amorphous silicon cells were excluded because of low durability in preliminary tests. Other types of solar cells were not tested.

A review of literature reveals the tendency of researchers to avoid standardized textile washing resistance testing. This study removes the most critical obstacle of textile integrated solar energy harvesting, the washing resistance.

This study aims to explore human–machine interactions in the process of adopting artificial intelligence (AI) based on the principles of Taylorism and digital Taylorism to validate these principles in postmodern management.

The topic has been investigated by means of a case study based on the current experience of Carrozzeria Basile, a body shop born in Turin in 1970.

The Carrozzeria Basile’s approach is rooted in scientific management concepts, and its digital evolution is aimed at centring humans, investigating human–machine interactions and how to take advantage of both of these.

The research contributes to both Taylorism management and the literature on human–machine interactions. A unique case study represents a first step in comprehending the phenomenon but could also represent a limit for the study.

Practical implications refer to the scientific path to facilitate the implementation and adoption of emerging technologies in the organisational process, including employee engagement and continuous employee training.

The research focuses on human–machine interactions in the process of adopting AI in the automation process. Its novelty also relies on the comprehension of the needed path to facilitate these interactions and stimulate a collaborative and positive approach. The study fills the literature gap investigating the interactions between humans and machines beginning with their historical roots, from Taylorism to digital Taylorism, in relation to an empirical scenario.

The purpose of this study is to examine the existence of greenwashing and sustainable development goal (SDG)-washing processes by comparing ex ante (SDG Compass) and ex post (SDG Compliance) indicators and investigating whether the limitations associated with these indicators encourage companies to engage in washing processes.

The authors use a sample of 1,154 companies included in the S&P Sustainability Yearbook (formerly the RobecoSAM Yearbook). The authors test for the presence of greenwashing by comparing ex ante and ex post indicators for each SDG, whereas to test for SDG-washing, the authors compare the two ex ante and ex post approaches considering the full set of SDGs.

The results show that there is no consistency between the two types of indicators to measure the level of SDG implementation in organisations. This lack of consistency may facilitate both greenwashing and SDG-washing processes, which is due to the design and limitations of these measurement tools.

Companies may choose those indicators that paint their commitment to the SDGs in the best light, but they may also select indicators based on the SDGs they want to report on. These two options would combine greenwashing and SDG-washing.

The shift towards improved standards and regulations for measuring SDG achievement is the result of several social factors such as investor scrutiny, regulatory reform, consumer awareness and increased corporate accountability.

Few previous studies have analysed in detail the interaction between greenwashing and SDG-washing. They focus on the use of ex ante or ex post indicators separately, with samples composed of local companies, and without considering the whole set of SDGs.

The purpose of this paper is to generate nitrogen-containing groups in the cotton fabric surface via low-temperature nitrogen plasma as an eco-friendly physical/zero-effluent process. This was done for rendering cotton dye-able with Acid Blue 284, which in fact does not have any direct affinity to fix on it.

Dyeing characteristics of the samples such as color strength (K/S), fastness properties to light, rubbing and perspiration and durability, as well as tensile strength, elongation at break, whiteness, weight loss and wettability in addition to zeta potential of the dyed samples, were determined and compared with untreated fabric. Confirmation and characterization of the plasma-treated samples via chemical modifications and zeta potential was also studied using Fourier transform infrared spectroscopy (FTIR) and Malvern Zetasizer instrumental analysis.

The obtained results of the plasma-treated fabric reflect the following findings: FTIR results indicate the formation of nitrogen-containing groups on cotton fabrics; notable enhancement in the fabric wettability, zeta potential to more positive values and improvement in the dyeability and overall fastness properties of treated cotton fabrics in comparison with untreated fabric; the tensile strength, elongation at break, whiteness and weight % of the plasma treated fabrics are lower than that untreated one; and the durability of the plasma treated fabric decreased with increasing the number of washing cycles.

The novelty addressed here is rendering cotton fabrics dye-able with acid dye via the creation of new cationic nitrogen-containing groups on their surface via nitrogen plasma treatment as an eco-friendly and efficient tool with a physical/zero-effluent process.

Industry 4.0 has an inimitable potential to create competitive advantages for the apparel industry by enhancing productivity, production, profitability, efficiency and effectiveness. This study, thus, aims to assess the digitalisation level of the Tanzanian apparel industry through the Industry 4.0 perspectives.

A mixed-methods-based approach was deployed. This study deployed semi-structured interviews, document review and observation methods for the qualitative approach. For the quantitative approach, closed-ended questionnaires were used to ascertain the digitalisation levels and maturity level of the textiles and apparel (T&A) factories and small and medium-sized textile enterprises in Tanzania. The sample size was 110, with participants engaged through the purposive sampling technique.

Industry 4.0 frameworks evolved into practices mainly since 2011 in several service and manufacturing industries globally. For Tanzania, the findings indicate that the overall maturity level of the T&A industries is 2.5 out of 5.0, demonstrating a medium level of adoption. Thus, the apparel industries are not operating under the industry 4.0 framework; they are operating within the third industrial revolution – Industry 3.0 – framework. For such industries to operate within the fourth industrial revolution – Industry 4.0 – that is only possible if there is significantly well-developed industrial infrastructure, availability of engineering talent, stable commercial partnerships, demand from the marketplace and transactional relationship with customers.

This study’s limitations include: firstly, Industry 4.0 is an emerging area; this resulted in limited theoretical underpinnings in the Tanzanian perspectives. Secondly, the studied industries may not suffice the need to generalise the findings for the entire country, thus needing another study.

Although Industry 4.0 conceptual frameworks have been on trial in several industries since 2011, this is amongst the first empirical research on Industry 4.0 in the Tanzanian apparel industry that assesses the digitalisation levels.

This article aims to focus on implementing Lean Six Sigma (LSS) in steel manufacturing to enhance productivity and quality in the galvanizing process line. In recent trends, manufacturing organizations have expressed strong interest in the LSS since they attempt to enhance its overall operations without imposing significant financial burdens.

This article used lean tools and Six Sigma's DMAIC (Define, Measure, Analyze, Improve and Control) with Yin's case study approach. This study tried to implement the LSS for the steel galvanizing process in order to reduce the number of defects using various LSS tools, including 5S, Value stream map (VSM), Pareto chart, cause and effect diagram, Design of experiments (DoE).

Results revealed a significant reduction in nonvalue-added time in the process, which led to improved productivity and Process cycle efficiency (PCE) attributed to applying lean-Kaizen techniques. By deploying the LSS, the overall PCE improved from 22% to 62%, and lead time was reduced from 1,347 min to 501 min. DoE results showed that the optimum process parameter levels decreased defects per unit steel sheet.

This research demonstrated how successful LSS implementation eliminates waste, improves process performance and accomplishes operational distinction in steel manufacturing.

Since low-cost/high-effect improvement initiatives have not been adequately presented, further research studies on adopting LSS in manufacturing sectors are needed. The cost-effective method of process improvement can be considered as an innovation.

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

This study investigates the barriers and drivers of using green methods and technologies (GMTs) in supportive educational buildings (SEBs) in South Africa, and assesses their impact on the circular economy (CE) in achieving net-zero carbon goals. While there has been extensive literature on green building technologies, there is limited research on the barriers and drivers of using GMT in SEBs, as well as their impact on the circular economy (CE) in achieving net-zero carbon goals.

This study adopts an interpretivist approach with an ontological basis, using an overarching case study of a SEB at the University of Cape Town (UCT). Semistructured interviews were conducted with executive UCT management, and a field survey of a UCT supportive education building was performed.

At UCT, multiple GMTs have been installed across various buildings to enhance monitoring and management of water and energy consumption. Moreover, initiatives to positively influence student behavior, such as water and energy-saving campaigns around UCT premises, have been introduced. The findings further indicate that UCT has recently emphasized the implementation of GMTs, resulting in improved resource efficiency, CE practices and progress toward achieving net-zero carbon targets for supportive education buildings and the university as a whole.

This research highlights the positive impact of GMTs on a SEB’s CE and net-zero carbon operations. As a result, facility managers should consider incorporating GMTs when planning the development or refurbishment of SEBs.

The sharing economy enables apartment owners to generate income from their assets. “Agoda Homes” is an online travel agent (OTA) that directly competes with Airbnb. A destination has to discover its competitiveness, but few studies have provided an overview of accommodation attributes in each destination, which are crucial to shaping its brand image. This paper aims to illustrate firm-generated content or attributes that apartment owners list about their properties on an OTA platform to comprehend factual information about apartments in each destination with various star ratings and user ratings and to formulate a research model for future studies.

Informational content and accommodation attributes for apartments are automatically collected using a Web scraping tool (the Data Miner). Descriptive statistics and text analysis (word cloud and word frequency) are used to analyze data.

Findings reveal the primary location, facilities, cleanliness and safety attributes for all apartments in each destination, along with star ratings and user ratings. A research framework for scholars is also suggested. Guidelines for stakeholders in the tourism industry are additionally furnished.

This work concentrates on apartments, which have received less attention in the tourism literature. The study gathers factual data from a website to mitigate respondent bias issues inherent in the traditional survey methods.

India generates around two million tonnes of e-waste every year, and it is increasing at a very high rate of 30%. However, due to inefficient handling of infrastructure and limited number of collection centres along with the absence of proper incentive structure for producer and recyclers, 95% of e-waste reaches to unorganized sector for disposal. Consumers are not aware of the need of proper e-waste disposal and in absence of proper motivation and they are not inclined towards recycling process. Therefore, this paper aims to identify the best practices of e-waste take adopted all over the world to implement effective policy interventions for e-waste management in India and other emerging economies.

This paper has recommended preventive as well as curative policy interventions on the basis of best e-waste management practices of Germany, Italy and Japan; life cycle assessment of e-waste; and SWOT analysis of Indian electronic product industry.

Preventive measures include a deposit refund scheme wherein a consumer will be responsible for depositing a refundable fees during the purchase of the product. The amount should be arrived at keeping in mind cost involved in handling e-waste and ensure some motivation for the consumers to give back used product. To ensure proper tracking of the product, Radio frequency identification (RFID) tags can be used which will be activated at the time of sale of product and remain so until product reaches some designated recycling space or recycler and consumer is returned back his deposit fee. Subsidy to the producers and recyclers can also be provided by the government to further incentivize the whole process. An example of mobile phones has been used to understand the proposed deposit fees and associated cost structure. Curative measures to reduce the generation of e-waste in long run for managing the discussed issue have also been proposed.

This study is an initiative for proposing and implementing best e-waste take back techniques in a developing economy like India by acquiring learnings from best/advanced economies in terms of e-waste take back.