Search results

Emissions produced by oceangoing vessels not only negatively affect the environment but also may deteriorate health of living organisms. Several regulations were released by the International Maritime Organization (IMO) to alleviate negative externalities from maritime transportation. Certain polluted areas were designated as “Emission Control Areas” (ECAs). However, IMO did not enforce any restrictions on the actual quantity of emissions that could be produced within ECAs. This paper aims to perform a comprehensive assessment of advantages and disadvantages from introducing restrictions on the emissions produced within ECAs. Two mixed-integer non-linear mathematical programs are presented to model the existing IMO regulations and an alternative policy, which along with the established IMO requirements also enforces restrictions on the quantity of emissions produced within ECAs. A set of linearization techniques are applied to linearize both models, which are further solved using the dynamic secant approximation procedure. Numerical experiments demonstrate that introduction of emission restrictions within ECAs can significantly reduce pollution levels but may incur increasing route service cost for the liner shipping company.

Two mixed-integer non-linear mathematical programs are presented to model the existing IMO regulations and an alternative policy, which along with the established IMO requirements also enforces restrictions on the quantity of emissions produced within ECAs. A set of linearization techniques are applied to linearize both models, which are further solved using the dynamic secant approximation procedure.

Numerical experiments were conducted for the French Asia Line 3 route, served by CMA CGM liner shipping company and passing through ECAs with sulfur oxide control. It was found that introduction of emission restrictions reduced the quantity of sulfur dioxide emissions produced by 40.4 per cent. In the meantime, emission restrictions required the liner shipping company to decrease the vessel sailing speed not only at voyage legs within ECAs but also at the adjacent voyage legs, which increased the total vessel turnaround time and in turn increased the total route service cost by 7.8 per cent.

This study does not capture uncertainty in liner shipping operations.

The developed mathematical model can serve as an efficient practical tool for liner shipping companies in developing green vessel schedules, enhancing energy efficiency and improving environmental sustainability.

Researchers and practitioners seek for new mathematical models and environmental policies that may alleviate pollution from oceangoing vessels and improve energy efficiency. This study proposes two novel mathematical models for the green vessel scheduling problem in a liner shipping route with ECAs. The first model is based on the existing IMO regulations, whereas the second one along with the established IMO requirements enforces emission restrictions within ECAs. Extensive numerical experiments are performed to assess advantages and disadvantages from introducing emission restrictions within ECAs.

Shipping is a major source of air pollution, causing severe impacts on the environment and human health, greatly contributing to the creation of greenhouse gases and influencing climate change. The research was investigated to provide a better insight into the emission inventories in the Red River in Hanoi (Vietnam) that is often heavily occupied as the primary route for inner-city waterway traffic.

The total emissions of seven different pollutants (PM₁₀, PM_2.5, SO_x, CO, CO₂, NO_x and HC) were estimated using the SPD-GIZ emission calculation model.

The results show that CO₂ has the most significant contribution to the gas volume emitted: 103.21 tons/day. Remarkably, bulk carriers are the largest emission vehicle, accounting for more than 97% of total emissions, due to their superior number and large capacity.

The result to have a roadmap for making efforts to fulfil its commitment so that it could achieve its net-zero climate target by 2050 in Vietnam as committed at COP26.

In this research, the number of vehicles and types of vessels travelling on the Red River flowing within Hanoi territory and other activity data are reported. The tally data will be used to estimate emissions of seven different pollutants (PM₁₀, PM_2.5, SO_x, CO, CO₂, NO_x and HC) using a method combining both top-down and bottom-up approaches.

Ports are a significant link in a global supply chain and an economic entity that contributes to the country's economy. India has around 200 ports along its coastline of about 8,000 Km, yet none of them perform at par with many Asian ports. In the Indian port system, cargo throughput and the turnaround time (TAT) of ships calling at ports constitute the most significant performance measures. These performance metrics do not integrate sustainability measures such as emission levels and energy consumed. The draft is a constraint in many ports and ships visit with less than full shipload cargo. The TAT for such vessels may be lower, but the emission per ton of cargo carried is higher compared to a ship with full shipload cargo. Many ports have old or poorly maintained equipment. This state of equipment increases pollution and consumption of energy. In this paper, an attempt has been made to address the issue of undesirable and right outputs simultaneously in an Indian port system. This paper proposes a framework to ensure zero defects in Indian port operations and a port-sustainability-index to measure sustainable services in Indian ports.

The authors used data envelopment analysis (DEA) to show that all private terminals did not perform efficiently and contradicted the notion of Indian policymakers that privatization will lead to an increase in performance levels. A literature review was carried out to identify the dimensions and factors that affect ports' performance. A case study of a major port in India and expert group discussion was done to ascertain the views of stakeholders on deficiencies in the system. The authors complemented this approach with sentiment analysis of opinions expressed by stakeholders over a while, using SentiStrength analysis software (Thelwell, 2010, 2012). The authors used the combined findings to develop the port-sustainability-index (PSI), identify the research question, and develop an ontology of the port system. The authors use the concepts of ontology-design-pattern (ODP) and logistics-service-map (Glöckner et al., 2014; Glöckner and Ludwig, 2016, 2017), opinion mining (Pang and Lee, 2008) and competency questions (Glöckner and Ludwig, 2017) to develop a port system map followed by the identification of critical elements; and the flows (physical and information flow) that gets disrupted due to defects in the system. The ontology led to the identification of competencies and capabilities a port needs to possess. Based on these identification process competency questions were drawn, and the authors identified the plausible defects that port may encounter. The authors suggested the sustainability metrics for monitoring port performance and policy changes based on the competency questions, defects, and mitigation plans.

The authors introduced four KPIs, namely, port-sustainability-index (PSI), load factor (l_x and l_y), draft ratio (d_r), and turnaround-time ratio (TATR). The authors suggested significant policy changes for Indian ports. These included –(1) Introduction of virtual arrival (VA) policy, reducing randomness in the system by pre-scheduling arrivals and activities. (2) Redefining economic life of equipment and machinery in terms of expenditure, income and desired levels of output. (3) Pricing port charges based on stakeholders’ ability and willingness to pay. The port needs to declare its productivity levels and frame their charges accordingly. (4) The ports need to frame an output-oriented privatization policy where it specifies the growth of the port. (5) Framing vessel pricing policy where a vessel may pay tax for the use of non-clean fuel or a get discount for bringing higher parcel load. (6) Levy lower port charges for the shipper for transporting cargo by rail and barges. (7) Introduce a differential pricing system where port levies lower charges for export cargo compared to import load.

The research work can be extended to develop a simulation model to carry out policy experimentations concerning the improvement of performance and carry out sustainable operations. Alternatively, researchers may develop a multi-criteria optimization model to determine the best course of action, keeping the objective function as minimization of PSI value.

This paper provides the means to the Indian ports to remain competitive, lower emission levels and energy consumption, and optimize emission per ton of cargo handled in the port.

Society significantly benefits from this study as it recommends ways to minimize pollution that has a significant impact on human lives. Besides, the measures suggested in the paper will lower the cost of exports and imports, enhancing the real income of consumers.

The area of sustainable port operations has previously been under-researched in the Indian context. Authors contribute to the sustainable port operation literature by suggesting a port-sustainability-index, a framework to assess the defects in port operation and development of a port-ontology for further research in the area of a port system.

The purpose of this paper is to investigate whether the headlined eco-bulkers ordered in 2012 and 2013 are posing a threat to the less-efficient ships ordered at the end of the boom in 2008 and 2009.

This paper will first investigate the drivers for the interest in such low-emission, low-speed bulker as well as the more general history of bulker designs. This is followed by a study on the vessels delivered between 2005 and 2014, based on eight parameters representing fuel efficiency, speed and hydromechanics properties. Within these results, evidence is sought for a significant change in the qualities of the vessels delivered after the last boom.

The data showed that at least till present, no significant changes could be discovered between 2014 and the earlier years. This indicates that either because of the long delivery times at the end of the boom, such vessels are still to be delivered, or that they were not ordered in an amount large enough to change the trend. For the future, this fact and the changes in vessel design resulting from the introduction of the energy efficiency design index (EEDI) in 2017 and the large fluctuations in the fuel prices will be interesting to keep monitoring the developments in the eight studied parameters.

This paper extends (in time) and improves (number of variables studied) a number of earlier studies on average qualities of the world fleet. It studies both the composition and the changes in average properties of the ships produced each year. It allowed the author to discover and explain the trends that would not have been evident when studying ships as single units or as the result of a business opportunity optimisation. Most important of which is the fact that, on average, ships produced are optimised for the current economic conditions and are not taken into consideration for future trends and scenarios.

The purpose of this paper is to illustrate an optimisation method, and resulting insights, for minimising total logistics-related carbon emissions for end-to-end supply chains.

The research is based on two real-life UK industrial cases. For the first case, several alternative realistic routes towards the UK are analysed and the optimal route minimising total carbon emissions is identified and tested in real conditions. For the second case, emissions towards several destinations are calculated and two alternative routes to southern Europe are compared, using several transport modes (road, Ro-Ro, rail and maritime). An adapted Value Stream Mapping (VSM) approach is used to map carbon footprint and calculate emissions; in addition Automatic Identification Systems (AIS) data provided information for vessel specification allowing the use of more accurate emission factors for each shipping leg.

The analysis of the first case demonstrates that end-to-end logistics-related carbon emissions can be reduced by 16-21 per cent through direct delivery to the UK as opposed to transhipment via a Continental European port. The analysis of the second case shows that deliveries to southern Europe have the highest potential for reduction through deliveries by sea. Both cases show that for distant overseas destinations, the maritime leg represents the major contributor to CO₂ emissions in the end-to-end supply chain. It is notable that one of the main apportionment approaches (that of Defra in the UK) generate higher carbon footprints for routes using Ro-Pax vessels, making those not optimal. The feasibility of the optimal route was demonstrated with real-life data.

This research used real-life data from two UK companies and highlighted where carbon emissions are generated in the inbound and outbound transport chain, and how these can be reduced.

This paper aims to identify the interplay of standard Capesize optimal speeds for time charter equivalent (TCE) maximization in the Australia–China iron ore route and the optimal speeds as an operational tool for compliance with the International Maritime Organization (IMO) carbon intensity indicator (CII).

The TCE at different speeds have been calculated for four standard Capesize specifications: (1) standard Capesize with ecoelectronic engine; (2) standard Capesize with non-eco engine (3) standard Capesize vessel with an eco-electronic engine fitted with scrubber and (4) standard Capesize with non-eco engine and no scrubber fitted.

Calculations imply that in a highly inflationary bunker price context, the dollar per ton freight rates equilibrates at levels that may push optimal speeds below the speeds required for minimum CII compliance (C Rating) in the Australia–China trade. The highest deviation of optimal speeds from those required for minimum CII compliance is observed for non-eco standard Capesize vessels without scrubbers. Increased non-eco Capesize deployment would see optimal speeds structurally lower at levels that could offer CII ratings improvements.

While most of the studies have covered the use of speed as a tool to improve efficiency and emissions in the maritime sector, few have been identified in the literature to have examined the interplay between the commercial and operational performance in the dry bulk sector stemming from the freight market equilibrium. The originality of this paper lies in examining the above relation and the resulting optimal speed selection in the Capesize sector against mandatory environmental targets.

Ports create harmful effects on their adjacent population because ships discharge noxious gases like SO_X, NO_X, and particulate matter (PM). To tackle this problem, some ports started to control emission through regulations such as Emission Control Areas (ECA) and Reduced Speed Zone (RSZ). This paper estimates the social cost of ship emission and eco-efficiency at the Port of Incheon (POI). We further examine how the ECA and RSZ designation can reduce the social cost. The estimation is based on the activity-based approach, where ship type, engine, and movement are used to measure fuel consumption and then emission. Results suggest that the social cost of ship emission at the POI amounts to $90,805,478. The eco-efficiency of the POI, compared to the one at the Port of Las Palmas in another study, is substantially better. Under RSZ, the corresponding emission abatement values are $4,485,308, $2,642,009 and $21,932,435 from SO₂, NO_X and PM reduction, respectively. If 1.0% and 0.1% sulfur fuel are used complying with rules of the ECA, the social cost savings amount to $8,174,947 and $12,868,842 from SO₂ reduction.

The objective to achieve economic growth and sustainable development (SD) within the maritime industry has ever since been the ultimate goal of the International Maritime Organization and its stakeholders. Coupled with this effect, the United Nations organization has also mandated all its bodies to adopt sustainable working policies and practices towards the achievement of SD in its 2030 Agenda. From the standpoint of an emerging economy, this study aims to examine green maritime practices adopted by maritime authorities towards the achievement of SD in the maritime industry of Ghana. The proposed conceptual model of this study supports the natural resource-based view theory advocated by Hart (1995).

The dataset of this study was gathered using semi-structured questionnaires. A total of 635 valid responses were received as feedback which were tested and analyzed using partial least square structural equation modelling. The rationale for the adoption of this analytical tool is its resilient ability to handle a relatively small quantity of datasets. It is also suitable for empirical studies involving model development and at the early stage of theory development.

The findings of the study are as follows; firstly, quality maritime education and training directly and significantly influence green maritime transport (GMT), clean ocean and maritime resource conservation (COMRC), green port operations and services (GPOS), SD and waste management and treatment systems (WMTS). Secondly, GMT, COMRC, GPOS and WMTS have a direct significant influence on SD. Lastly, GMT, COMRC, GPOS and WMTS partially mediate the relationship between quality maritime education and training and SD.

This study proposes a conceptual model that attempts to explain to maritime authorities and stakeholders that although the adoption of green maritime practices significantly influences SD, yet, it may be insufficient without quality maritime education and training provided to maritime professionals. Hence, emphasizing that all maritime personnel receive quality maritime education and training to enhance the long-term achievement of SD in the maritime industry. It also attempts to prove and suggest to maritime authorities how they can collectively integrate both onshore and offshore green maritime practices to achieve SD.

The originality of this study shows in testing a conceptual model that affirms that, achieving SD in the maritime industry is dependent on quality maritime education and training received by maritime personnel, hence, demonstrating the significant role of maritime training institutions towards the maritime industry and the achievement of SD.

The purpose of this study is to empirically evaluate the impacts of institutional pressures on the use of alternative maritime power (AMP) and which in turn enhance environmental performance in the maritime shipping context.

Factor analysis was used to identify the key coercive pressure, normative pressure, mimetic pressure, AMP practice and green performance dimensions. The author collects data from a survey of 184 maritime shipping operators in Taiwan and applies a structural equation modelling (SEM) to test the research hypotheses.

The findings show that AMP practice act as mediator variables between institutional pressures and environmental performance.

Theoretical contributions and managerial implications are drawn to help maritime shipping operators to improve environmental performance.

The purpose of this paper is to identify and classify the various initiatives developed and implemented across the globe for the abatement of maritime air emissions.

In this paper, an extensive survey of various sources was conducted, including the official reports of international and regional institutions, government policy documents, port authority websites, classification society pages, private firms’ sites and the academic literature. The initiatives were then categorized in accordance with the classification of the Swedish Environmental Protection Agency and analyzed using the SPSS Statistics software to give some insight into their frequencies and the interrelationships between them.

This exploratory review resulted in the establishment of a comprehensive global database of initiatives encouraged by the whole range of shipping stakeholders and decision-makers for the reduction of shipping air emissions. According to the findings, economic incentives that provide motivation for the adoption of less environmentally damaging practices are the most commonly used initiative, followed by infrastructure investments and informative policies.

The results provide implications for further research that include an in-depth analysis of ports’ policies, as well as an evaluation of initiatives applied on a large scale to map their emissions reduction potential for shipping.

The main contribution of this paper is the identification and analysis of all the diverse initiatives implemented globally in a comprehensive way and its dealing with air pollution from shipping as a whole.