Search results

Shipping is a major source of air pollution, causing severe impacts on the environment and human health, greatly contributing to the creation of greenhouse gases and influencing climate change. The research was investigated to provide a better insight into the emission inventories in the Red River in Hanoi (Vietnam) that is often heavily occupied as the primary route for inner-city waterway traffic.

The total emissions of seven different pollutants (PM₁₀, PM_2.5, SO_x, CO, CO₂, NO_x and HC) were estimated using the SPD-GIZ emission calculation model.

The results show that CO₂ has the most significant contribution to the gas volume emitted: 103.21 tons/day. Remarkably, bulk carriers are the largest emission vehicle, accounting for more than 97% of total emissions, due to their superior number and large capacity.

The result to have a roadmap for making efforts to fulfil its commitment so that it could achieve its net-zero climate target by 2050 in Vietnam as committed at COP26.

In this research, the number of vehicles and types of vessels travelling on the Red River flowing within Hanoi territory and other activity data are reported. The tally data will be used to estimate emissions of seven different pollutants (PM₁₀, PM_2.5, SO_x, CO, CO₂, NO_x and HC) using a method combining both top-down and bottom-up approaches.

This paper deals with network configurations in liner shipping and inland transportation from a carrier's perspective. The cost efficiency of different possible network configurations in the foreland-hinterland continuum is discussed based on a cost model and on a qualitative analysis. It is demonstrated that the tendency towards cargo concentration in a limited number of ports has led to the redesign of collection and distribution networks in the hinterland. Further cargo bundling in the foreland-hinterland continuum towards even fewer ports and inland centres is only interesting from a cost perspective if considerable economies of scale and density can be realised in the associated hinterland networks. The more cost efficient the network becomes, the less convenient that network could be for the shippers ' needs in terms of frequency and flex ibility. As such, the future configuration of liner shipping networks and inland transport networks will largely depend on the balance of power between carriers and shippers.

Inland shipping has been extensively recognised as a sustainable, efficient and good alternative to rail and road modes of transportation. In recent years, various authorities and academic researchers have advocated shifting from road to other sustainable modes like inland waterway transport (IWT) or rail transport. Academic work on modernisation and technological innovations to enhance the effectiveness and efficiency of waterborne transportation is becoming apparent as a growing body of literature caused by the need to achieve a sustainable transport system. Thus, it became apparent to explore the research trends on IWT.

A systematic and structured literature review study was employed in this paper to identify the challenges and concepts in modernising inland waterways for freight transportation. The review analysed 94 articles published in 54 journals from six well-known databases between 2010 and 2022.

The key findings of this review are that despite various challenges confronting the sector, there have been successful cases of technological advancement in the industry. The main interest among scholars is improving technical and economic performance, digitalisation, and safety and environmental issues. The review revealed that most of the literature is fragmented despite growing interest from practitioners and academic scholars. Academic research to address the strategic objectives, including strengthening competitiveness (shipbuilding, hydrodynamics, incorporating artificial intelligence into the decision-making process, adopting blockchain technology to ensure transparency and security in the transactions, new technologies for fleets adaptation to climate change, more effective handling, maintenance and rehabilitation technologies), matching growth and changing trade patterns (intermodal solutions and new logistics approaches) are major causes of concerns.

By employing the approach of reviewing previously available literature on IWT review papers, this review complements the existing body of literature in the field of IWT by providing in a single paper a consolidation of recent state-of-the-art research on technological developments and challenges for inland waterways freight transport in the intermodal supply chain that can act as a single resource to keep researchers up to date with the most recent advancements in research in the domain of inland waterway freight transport. Additionally, this review identified gaps in the literature that may inspire new research themes in the field of IWT.

It should be noted that the (inland waterway transport) IWT in Ukraine currently is in its infancy in comparison with other land based transport means (rail and road) and with other countries that possess navigable rivers. This paper is an extension of the research initiated by Grushevska and Notteboom (2015) where the concepts of intermediacy and centrality were introduced in order to assess the role of Ukraine in the global and regional transport networks. The list of key obstacles for Ukraine’s intermediacy function included IWT related barriers such as: (i) deficient inland waterway infrastructure, (ii) high IWT costs (fees for bridges, locks etc.) and (iii) pilotage charges. To date the transportation to/from ports is mainly fulfilled by road or by rail based multimodal transport solutions. We present the unutilized potential of Ukrainian IWT that needs to be efficiently exploited for the benefit of the national economy and national transport system. This study intends to enrich the limited academic research on IWT systems in a transition stage, as exemplified by the case of Ukraine.

In the 21^st Century, a region 's growth and prosperity will depend upon its intermodal transportation infrastructure and its ability to efficiently move goods, materials, and people within the system whether it be from origin to destination; from supplier to customer through the various levels of the supply-chain; or from point to point within the system. Planning for the future focuses on improving a region 's intermodal transportation system efficiencies and infrastructure, its connection to other economies, and on the development of logistics institutions and facilities.

With China 's rapidly developing economy and society, record numbers of new modern facilities such as airports, ports, highways, logistics parks and warehouses are being built. Along with this, companies have made extensive investments in information technologies and software to support the tremendous growth that has taken place in the logistics industry. The development and improvement of China's historic inland water transport system is essential to their continued future growth and prosperity. In Korea, past and present National Governments have emphasized the importance of developing a North East Asian Logistics and Business Hub in their region and have worked on strategies, which include water transport, as part of an important national agenda to that end.

This article looks at how trade flows in the Yangtze and Yellow Sea Regions and between China and South Korea might be enhanced by application of improved shipping methods in marine commerce that will promote economic growth in the region. The application of logistics practices and use of barges is explored for the movement of containers on inland and coastal waterways as well as in short sea shipping which could greatly facilitate the region 's situation with respect to future economic growth.

Inland waterways play a much greater role in inland freight carrying in the United Kingdom than is generally realised. The purpose of this article is to show the extent of the underestimation of water transport and to outline the potential for future development and the problems which will have to be overcome to realise that potential.

In the UK there have been some recent signs that the inland waterways can play a role in meeting the nation's transport needs. The author discusses the progress already made and what still needs to be done so that the country's canals can once again take up their position in the transport scene.

Economies of scale drive container ship owners towards ordering larger vessels. Terminals need to ensure a safe (un)loading operation of these vessels, which can only be guaranteed if the mooring equipment is not overloaded (lines, fenders and bollards) and if the motions of the vessel remain below set limits, under external forces. This paper aims to focus on the passing vessel effect as a potential disturbing factor in the Port of Antwerp.

Motion criteria for allowing safe (un)loading of container vessels are established by considering the container handling process and existing international standards (PIANC). A case study simulation is presented where the behaviour of the moored vessel under ship passages is evaluated. Starting from a representative event, the effect of changes in passing speed and distance is discussed.

The study illustrates the influence of passing velocity and distance on the behaviour of the moored vessel, showing that when passing speeds are higher and/or distances lower than the reference event, safety limits are potentially exceeded. Possible mitigating measures, including the use of stiffer mooring lines and/or a change in arrangement, are discussed.

This paper serves as a basis for future research on safety criteria and optimisation of the mooring equipment and configuration to deal with passing vessel effects.

The presented results can be used by ship and terminal designers to gain familiarity with passing vessel effects and adopt suggested best practice.

By restricting the motions of the passing vessels, the focus and general well-being of the crane operator is enhanced, as is the safety of workers.

The paper provides a unique combination of container fleet observation, safety criteria establishment and case study application.

Ports are a significant link in a global supply chain and an economic entity that contributes to the country's economy. India has around 200 ports along its coastline of about 8,000 Km, yet none of them perform at par with many Asian ports. In the Indian port system, cargo throughput and the turnaround time (TAT) of ships calling at ports constitute the most significant performance measures. These performance metrics do not integrate sustainability measures such as emission levels and energy consumed. The draft is a constraint in many ports and ships visit with less than full shipload cargo. The TAT for such vessels may be lower, but the emission per ton of cargo carried is higher compared to a ship with full shipload cargo. Many ports have old or poorly maintained equipment. This state of equipment increases pollution and consumption of energy. In this paper, an attempt has been made to address the issue of undesirable and right outputs simultaneously in an Indian port system. This paper proposes a framework to ensure zero defects in Indian port operations and a port-sustainability-index to measure sustainable services in Indian ports.

The authors used data envelopment analysis (DEA) to show that all private terminals did not perform efficiently and contradicted the notion of Indian policymakers that privatization will lead to an increase in performance levels. A literature review was carried out to identify the dimensions and factors that affect ports' performance. A case study of a major port in India and expert group discussion was done to ascertain the views of stakeholders on deficiencies in the system. The authors complemented this approach with sentiment analysis of opinions expressed by stakeholders over a while, using SentiStrength analysis software (Thelwell, 2010, 2012). The authors used the combined findings to develop the port-sustainability-index (PSI), identify the research question, and develop an ontology of the port system. The authors use the concepts of ontology-design-pattern (ODP) and logistics-service-map (Glöckner et al., 2014; Glöckner and Ludwig, 2016, 2017), opinion mining (Pang and Lee, 2008) and competency questions (Glöckner and Ludwig, 2017) to develop a port system map followed by the identification of critical elements; and the flows (physical and information flow) that gets disrupted due to defects in the system. The ontology led to the identification of competencies and capabilities a port needs to possess. Based on these identification process competency questions were drawn, and the authors identified the plausible defects that port may encounter. The authors suggested the sustainability metrics for monitoring port performance and policy changes based on the competency questions, defects, and mitigation plans.

The authors introduced four KPIs, namely, port-sustainability-index (PSI), load factor (l_x and l_y), draft ratio (d_r), and turnaround-time ratio (TATR). The authors suggested significant policy changes for Indian ports. These included –(1) Introduction of virtual arrival (VA) policy, reducing randomness in the system by pre-scheduling arrivals and activities. (2) Redefining economic life of equipment and machinery in terms of expenditure, income and desired levels of output. (3) Pricing port charges based on stakeholders’ ability and willingness to pay. The port needs to declare its productivity levels and frame their charges accordingly. (4) The ports need to frame an output-oriented privatization policy where it specifies the growth of the port. (5) Framing vessel pricing policy where a vessel may pay tax for the use of non-clean fuel or a get discount for bringing higher parcel load. (6) Levy lower port charges for the shipper for transporting cargo by rail and barges. (7) Introduce a differential pricing system where port levies lower charges for export cargo compared to import load.

The research work can be extended to develop a simulation model to carry out policy experimentations concerning the improvement of performance and carry out sustainable operations. Alternatively, researchers may develop a multi-criteria optimization model to determine the best course of action, keeping the objective function as minimization of PSI value.

This paper provides the means to the Indian ports to remain competitive, lower emission levels and energy consumption, and optimize emission per ton of cargo handled in the port.

Society significantly benefits from this study as it recommends ways to minimize pollution that has a significant impact on human lives. Besides, the measures suggested in the paper will lower the cost of exports and imports, enhancing the real income of consumers.

The area of sustainable port operations has previously been under-researched in the Indian context. Authors contribute to the sustainable port operation literature by suggesting a port-sustainability-index, a framework to assess the defects in port operation and development of a port-ontology for further research in the area of a port system.