Search results

The inclusion of heritage dwellings in the UK decarbonization policies can contribute to cut operational carbon emissions from the building stock; this needs to be made a priority if net zero carbon targets are to be achieved. However, the energy and carbon savings potential of suitable retrofit interventions on this part of the stock is extremely variable and strictly intertwined with the range of baseline conditions of such dwellings. This study aims to propose a framework for interventions in traditional listed dwellings (TLDs) to improve their energy performance utilizing dynamic energy simulation (DES) of selected case studies (CSs) in the city of Brighton and Hove (South-East England).

To achieve this aim, the study established a baseline scenario which provides a basis for the assessment of energy performance and thermo-hygrometric behaviour pre- and post-interventions and allows for comparison between different CSs under comparable conditions.

Presenting a brief overview of the methodology adopted in this study, the paper describes the approach devised to generate such baseline scenario. The paper then compares the results obtained from simulation of normalized and baseline models with the status-quo energy consumption of the dwellings investigated (based on meter readings).

This analysis finally allows to highlight some key physical determinants of the baseline HEC which, in the following stage of research, proved to have a considerable effect also on the amount of energy and carbon savings achievable post retrofit interventions.

This study traced the architectural, urban and social characteristics of the Bugok Railway Official Residences (BRORs) in South Korea. It also explored the modern elements of Western (or Japanized Western) or traditional Korean characteristics embodied in the BRORs in the modernization process of Korea in the early 20th century.

Through literature reviews, field trips and archive investigation, this study uncovered new critical facts concerning the origin of the BRORs’ construction plan and architectural characteristics.

The BRORs’ value can be described as follows. First, the BRORs are the first modern housing complex in the Uiwang region. Second, they are meaningful as a housing area built during the Japanese colonial period, and many houses were concentrated in the center of a large city. Third, each official residence shows that various phenomena (mass production, standardization, efficiency and so on) are concentrated in buildings from premodern to modern period. Finally, the image of a group residential complex about to be demolished due to redevelopment is recorded in detail.

In the 1940s, the Railway Bureau of the Japanese Government-General of Korea planned a new small-scale town where mainly railway workers would live. The BRORs in Sam-dong, Uiwang were the first-phase plan. Specifically, 200 households in 100 buildings (two households per building) were built in 1943 during the end of the Japanese colonial period. After the liberation in 1945, these residences were made available to the general public and only 27 households remained through modification and renovation. The remaining residences will be demolished in 2023.

This research examined the meaning of the BRORs, which had not previously been researched in-depth, from diverse perspectives; accordingly, the basic research required for sustainable archiving can be performed after demolition using the study data.

This study aims to focus on understanding how different jet angles and Reynolds numbers influence the phase change materials’ (PCMs) melting process and their capacity to store energy. This approach is intended to offer novel insights into enhancing thermal energy storage systems, particularly for applications where heat transfer efficiency and energy storage are critical.

The research involved an experimental and numerical analysis of PCM with a melting temperature range of 22 °C–26°C under various conditions. Three different jet angles (45°, 90° and 135°) and two container angles (45° and 90°) were tested. Additionally, two different Reynolds numbers (2,235 and 4,470) were used to explore the effects of jet outlet velocities on PCM melting behaviour. The study used a circular container and analysed the melting process using the hot air inclined jet impingement (HAIJI) method.

The obtained results showed that the average temperature for the last time step at Ф = 90° and Re = 4,470 is 6.26% higher for Ф = 135° and 14.23% higher for Ф = 90° compared with the 45° jet angle. It is also observed that the jet angle, especially for Ф = 90°, is a much more important factor in energy storage than the Reynolds number. In other words, the jet angle can be used as a passive control parameter for energy storage.

This study offers a novel perspective on the effective storage of waste heat transferred with air, such as exhaust gases. It provides valuable insights into the role of jet inclination angles and Reynolds numbers in optimizing the melting and energy storage performance of PCMs, which can be crucial for enhancing the efficiency of thermal energy storage systems.

This paper aims to illustrate the extensive benefits of qualitative data analysis as a rarely undertaken process in post-occupancy evaluation surveys. As a result, there is limited evidence of what occupants say about their buildings, especially for operational parameters, as opposed to how they rate them. While quantitative analyses provide useful information on how workers feel about workplace operational factors, qualitative analyses provide richer information on what aspects of the workplace workers identify as influential to their comfort, well-being and productivity.

The authors analysed 6,938 comments from office buildings worldwide on workers’ perception of workplace operational factors: design, storage, needs, space at desks and storage in their work environments. These factors were analysed based on the buildings’ design intent and use, and the associated comments were coded into positive, negative and balanced comments. The authors used a combination of coding, descriptive analysis, content analysis and word cloud to dissect the comments.

The findings showed that whereas workers rated these operational factors favourably, there were significantly more negative comments about each factor. Also, the Chi-square test showed a significant association (p < 0.01) between the satisfaction scale and the type of comments received for all the operational factors. This means that when a factor is rated high in the satisfaction score (5–7), there were fewer negative and more positive comments and vice versa. The word cloud analysis highlighted vital aspects of the office environment the workers mostly commented on, such as open plan design, natural lighting, space and windows, toilets, facilities, kitchens, meeting room booking systems, storage and furniture.

This study highlights the importance of dissecting building occupants’ comments as integral to building performance monitoring and measurement. These emphasise the richness and value of respondents’ comments and the importance of critically analysing them. A limitation is that only 6,938 comments were viable for analysis because most comments were either incomplete with no meaning or were not provided. This underlines the importance of encouraging respondents to comment and express their feelings in questionnaire surveys. Also, the building use studies questionnaire data set presents extensive opportunities for further analyses of interrelationships between demographics, building characteristics and environmental and operational factors.

The findings from this study can be applied to future projects and facility management to maintain and improve office buildings throughout their life cycle. Also, these findings are essential in predicting the requirements of future workplaces for robust workplace designs and management.

The authors identified specific comments on the performance of workplaces across the globe, showing similarities and differences between sustainable, conventional, commercial and institutional buildings. Specifically, the analysis showed that office workers’ comments do not always corroborate the ratings they give their buildings. There was a significantly higher percentage of negative comments than positive comments despite the high satisfaction scores of the operational factors.