Search results
1 – 10 of over 18000Md.Tanvir Ahmed, Hridi Juberi, A.B.M. Mainul Bari, Muhommad Azizur Rahman, Aquib Rahman, Md. Ashfaqur Arefin, Ilias Vlachos and Niaz Quader
This study aims to investigate the effect of vibration on ceramic tools under dry cutting conditions and find the optimum cutting condition for the hardened steel machining…
Abstract
Purpose
This study aims to investigate the effect of vibration on ceramic tools under dry cutting conditions and find the optimum cutting condition for the hardened steel machining process in a computer numerical control (CNC) lathe machine.
Design/methodology/approach
In this research, an integrated fuzzy TOPSIS-based Taguchi L9 optimization model has been applied for the multi-objective optimization (MOO) of the hard-turning responses. Additionally, the effect of vibration on the ceramic tool wear was investigated using Analysis of Variance (ANOVA) and Fast Fourier Transform (FFT).
Findings
The optimum cutting conditions for the multi-objective responses were obtained at 98 m/min cutting speed, 0.1 mm/rev feed rate and 0.2 mm depth of cut. According to the ANOVA of the input cutting parameters with respect to response variables, feed rate has the most significant impact (53.79%) on the control of response variables. From the vibration analysis, the feed rate, with a contribution of 34.74%, was shown to be the most significant process parameter influencing excessive vibration and consequent tool wear.
Research limitations/implications
The MOO of response parameters at the optimum cutting parameter settings can significantly improve productivity in the dry turning of hardened steel and control over the input process parameters during machining.
Originality/value
Most studies on optimizing responses in dry hard-turning performed in CNC lathe machines are based on single-objective optimization. Additionally, the effect of vibration on the ceramic tool during MOO of hard-turning has not been studied yet.
Details
Keywords
Edric John Cruz Nacpil, Rencheng Zheng, Tsutomu Kaizuka and Kimihiko Nakano
Two-handed automobile steering at low vehicle speeds may lead to reduced steering ability at large steering wheel angles and shoulder injury at high steering wheel rates (SWRs)…
Abstract
Purpose
Two-handed automobile steering at low vehicle speeds may lead to reduced steering ability at large steering wheel angles and shoulder injury at high steering wheel rates (SWRs). As a first step toward solving these problems, this study aims, firstly, to design a surface electromyography (sEMG) controlled steering assistance interface that enables hands-free steering wheel rotation and, secondly, to validate the effect of this rotation on path-following accuracy.
Design/methodology/approach
A total of 24 drivers used biceps brachii sEMG signals to control the steering assistance interface at a maximized SWR in three driving simulator scenarios: U-turn, 90º turn and 45º turn. For comparison, the scenarios were repeated with a slower SWR and a game steering wheel in place of the steering assistance interface. The path-following accuracy of the steering assistance interface would be validated if it was at least comparable to that of the game steering wheel.
Findings
Overall, the steering assistance interface with a maximized SWR was comparable to a game steering wheel. For the U-turn, 90º turn and 45º turn, the sEMG-based human–machine interface (HMI) had median lateral errors of 0.55, 0.3 and 0.2 m, respectively, whereas the game steering wheel, respectively, had median lateral errors of 0.7, 0.4 and 0.3 m. The higher accuracy of the sEMG-based HMI was statistically significant in the case of the U-turn.
Originality/value
Although production automobiles do not use sEMG-based HMIs, and few studies have proposed sEMG controlled steering, the results of the current study warrant further development of a sEMG-based HMI for an actual automobile.
Details
Keywords
The International Air Transport Association (IATA) New Distribution Capability (NDC) standard aims at modernising the airline distribution landscape. It has supported the spread…
Abstract
Purpose
The International Air Transport Association (IATA) New Distribution Capability (NDC) standard aims at modernising the airline distribution landscape. It has supported the spread of Direct Connects by providing a common standard for linking airlines to travel agencies. The purpose of this paper is to analyse the historical development of airline distribution and to derive implications for the future.
Design/methodology/approach
This paper follows the approach of Yeoman and McMahon-Beattie (2017) in providing a chronological account based on published research.
Findings
Direct Connects are discussed to be a step back in the evolution of the distribution landscape because they foster disaggregation. An analysis of the history of distribution finds that a comparison of Direct Connects to the early stages of computer reservation system technology falls short to recognise the tremendous technological and market changes connected to the internet, cloud computing and the rise of low-cost carriers. Moreover, drawing on the seminal article by Anderson and Tushman (1990) on technical discontinuities and dominant designs, the current state of the distribution landscape is characterised to be an era of ferment that is driven by design competition and that might end up in a new dominant design.
Originality/value
The originality of this paper lies in a critical review of the turning points of distribution. By reviewing the past developments, the paper sheds light on the contribution that IATA NDC and Direct Connect technology might deliver to the field of airline distribution.
Details
Keywords
Anna-Leena Kurki, Elina Weiste, Hanna Toiviainen, Sari Käpykangas and Hilkka Ylisassi
The involvement of clients in service encounters and service development has become a central principle for contemporary health and social care organizations. However, in…
Abstract
Purpose
The involvement of clients in service encounters and service development has become a central principle for contemporary health and social care organizations. However, in day-to-day work settings, the shift toward client involvement is still in progress. We examined how health and social care professionals, together with clients and managers, co-develop their conceptions of client involvement and search for practical ways in which to implement these in organizational service processes.
Design/methodology/approach
The empirical case of this study was a developmental intervention, the client involvement workshop, conducted in a Finnish municipal social and welfare center. The cultural-historical activity theory (CHAT) framework was used to analyze the development of client involvement ideas and the modes of interaction during the intervention.
Findings
Analysis of the collective discussion revealed that the conceptions of client involvement developed through two interconnected object-orientations: Enabling client involvement in service encounters and promoting client involvement in the service system. The predominant mode of interaction in the collective discussion was that of “coordination.” The clients' perspective and contributions were central aspects in the turning points from coordination to cooperation; professionals crossed organizational boundaries, and together with clients, constructed a new client involvement-based object. This suggests that client participation plays an important role in the development of services.
Originality/value
The CHAT-based examination of the modes of interaction clarifies the potential of co-developing client-involvement-based services and highlights the importance of clients' participation in co-development.
Details
Keywords
Abstract
Purpose
Under the constraints of given passenger service level and coupling travel demand with train departure time, this study optimizes the train operational plan in an urban rail corridor to minimize the numbers of train trips and rolling stocks considering the time-varying demand of urban rail passenger flow.
Design/methodology/approach
The authors optimize the train operational plan in a special network layout, i.e. an urban rail corridor with dead-end terminal yard, by decomposing it into two sub-problems: train timetable optimization and rolling stock circulation optimization. As for train timetable optimization, the authors propose a schedule-based passenger flow assignment method, construct the corresponding timetabling optimization model and design the bi-directional coordinated sequential optimization algorithm. For the optimization of rolling stock circulation, the authors construct the corresponding optimization assignment model and adopt the Hungary algorithm for solving the model.
Findings
The case study shows that the train operational plan developed by the study's approach meets requirements on the passenger service quality and reduces the operational cost to the maximum by minimizing the numbers of train trips and rolling stocks.
Originality/value
The example verifies the efficiency of the model and algorithm.
Details
Keywords
Jonathan Orsini, Kate McCain and Hannah M. Sunderman
The purpose of the current innovative practice paper is to introduce a technique to explore leader identity development and meaning-making that builds on the narrative pedagogical…
Abstract
Purpose
The purpose of the current innovative practice paper is to introduce a technique to explore leader identity development and meaning-making that builds on the narrative pedagogical tradition. In this paper, we recommend a process for combining turning-point graphing and responsive (semi-structured) interviews to co-explore leadership identity development and meaning-making with college students.
Design/methodology/approach
The paper provides student feedback data on the effectiveness of the technique in improving understanding of leader identity and transforming meaning-making.
Originality/value
We hope practitioners can utilize this approach to build leadership identity development and meaning-making capacity in college students.
Details
Keywords
Ian Seymour Yeoman and Una McMahon-Beattie
The primary aim of revenue management (RM) is to sell the right product to the right customer at the right time for the right price. Ever since the deregulation of US airline…
Abstract
Purpose
The primary aim of revenue management (RM) is to sell the right product to the right customer at the right time for the right price. Ever since the deregulation of US airline industry, and the emergence of the internet as a distribution channel, RM has come of age. The purpose of this paper is to map out ten turning points in the evolution of Revenue Management taking an historical perspective.
Design/methodology/approach
The paper is a chronological account based upon published research and literature fundamentally drawn from the Journal of Revenue and Pricing Management.
Findings
The significance and success to RM is attributed to the following turning points: Littlewood’s rule, Expected Marginal Seat Revenue, deregulation of the US air industry, single leg to origin and destination RM, the use of family fares, technological advancement, low-cost carriers, dynamic pricing, consumer and price transparency and pricing capabilities in organizations.
Originality/value
The originality of the paper lies in identifying the core trends or turning points that have shaped the development of RM thus assisting futurists or forecasters to shape the future.
Details
Keywords
Djordje Cica, Branislav Sredanovic, Sasa Tesic and Davorin Kramar
Sustainable manufacturing is one of the most important and most challenging issues in present industrial scenario. With the intention of diminish negative effects associated with…
Abstract
Sustainable manufacturing is one of the most important and most challenging issues in present industrial scenario. With the intention of diminish negative effects associated with cutting fluids, the machining industries are continuously developing technologies and systems for cooling/lubricating of the cutting zone while maintaining machining efficiency. In the present study, three regression based machine learning techniques, namely, polynomial regression (PR), support vector regression (SVR) and Gaussian process regression (GPR) were developed to predict machining force, cutting power and cutting pressure in the turning of AISI 1045. In the development of predictive models, machining parameters of cutting speed, depth of cut and feed rate were considered as control factors. Since cooling/lubricating techniques significantly affects the machining performance, prediction model development of quality characteristics was performed under minimum quantity lubrication (MQL) and high-pressure coolant (HPC) cutting conditions. The prediction accuracy of developed models was evaluated by statistical error analyzing methods. Results of regressions based machine learning techniques were also compared with probably one of the most frequently used machine learning method, namely artificial neural networks (ANN). Finally, a metaheuristic approach based on a neural network algorithm was utilized to perform an efficient multi-objective optimization of process parameters for both cutting environment.
Details
Keywords
The purpose of this paper is to better understand the dramatic transformation of Las Vegas from a local watering hole to a world renowned entertainment city, and to offer…
Abstract
Purpose
The purpose of this paper is to better understand the dramatic transformation of Las Vegas from a local watering hole to a world renowned entertainment city, and to offer predictions of what this ever-changing city might become in the future.
Design/methodology/approach
A series of turning points in Las Vegas’ history are presented in a chronological manner, highlighting how external forces have played a role in shaping the city into what it is today. These external forces are then used as the underlying reasoning for a series of scenarios, signposts informing predictions detailing what might happen to Las Vegas in the future.
Findings
The development of Las Vegas has been influenced by a wide range of external factors, from geology, government, organized crime, business visionaries, large corporations and the economy. The continued influence of these factors could lead to drastically divergent outcomes from the loss of the city to a new golden age.
Originality/value
This paper identifies turning points that have helped to shape the development of Las Vegas, and in doing so encourages researchers to consider future scenarios grounded in the underlying dynamics of the turning points.
Details
Keywords
Before Philip King sold his five bookstores in Christchurch roughly 10 years ago to Whitcoulls, a large Australian-owned bookstore and office supplies operation, he hardly fancied…
Abstract
Before Philip King sold his five bookstores in Christchurch roughly 10 years ago to Whitcoulls, a large Australian-owned bookstore and office supplies operation, he hardly fancied himself as an entrepreneur. Books were his passion: He loved to read. However, his first job was selling barbeque charcoal to New Zealand℉s South Island residents.