Search results
1 – 10 of over 18000Concrete arch structures are commonly constructed for various civil engineering applications. Despite their frequent use, there is a lack of research on the response and…
Abstract
Purpose
Concrete arch structures are commonly constructed for various civil engineering applications. Despite their frequent use, there is a lack of research on the response and performance of concrete arches when subjected to fire loading. Hence, this paper aims to investigate the response and in-plane failure modes of shallow circular concrete arches subjected to mechanical and fire loading.
Design/methodology/approach
This study is conducted through the development of a three-dimensional finite element (FE) model in ANSYS. The FE model is verified by comparison to a non-discretisation numerical model derived herein and the reduced modulus buckling theory, both used for the non-linear inelastic analysis of shallow concrete arches subjected to uniformly distributed radial loading and uniform temperature field. Both anti-symmetric and symmetric buckling modes are examined, with analysis of the former requiring geometric imperfection obtained by an eigenvalue buckling analysis.
Findings
The FE results show that anti-symmetric bifurcation buckling is the dominant failure mode in shallow concrete arches under mechanical and fire loading. Additionally, parametric studies are presented which illustrate the influence of various parameters on fire resistance time.
Originality/value
Fire response of concrete arches has not been reported in the open literature. The authors have previously investigated the stability of shallow concrete arches subjected to mechanical and uniform thermal loading. It was found that temperature greatly reduced the buckling loads of concrete arches. However, this study was limited to the simplifying assumptions made which include elastic material behaviour and uniform temperature loading. The present study provides a realistic insight into the fire response and stability of shallow concrete arches. The findings herein may be adopted in the fire design of shallow concrete arches.
Details
Keywords
Kei Kimura, Takeshi Onogi, Naoya Yotsumoto and Fuminobu Ozaki
In this study, the effects of strain rate on the bending strength of full-scale wide-flange steel beams have been examined at elevated temperatures. Both full-scale loaded heating…
Abstract
Purpose
In this study, the effects of strain rate on the bending strength of full-scale wide-flange steel beams have been examined at elevated temperatures. Both full-scale loaded heating tests under steady-state conditions and in-plane numerical analysis using a beam element have been employed.
Design/methodology/approach
The load–deformation relationships in 385 N/mm2-class steel beam specimens was examined using steady-state tests at two loading rate values (0.05 and 1.00 kN/s) and at two constant member temperatures (600 and 700 °C). Furthermore, the stress–strain relationships considering the strain rate effects were proposed based on tensile coupon test results under various strain rate values. The in-plane elastoplastic numerical analysis was conducted considering the strain rate effect.
Findings
The experimental test results of the full-scale steel beam specimens confirmed that the bending strength increased with increase in strain rate. In addition, the analytical results agreed relatively well with the test results, and both strain and strain rate behaviours of a heated steel member, which were difficult to evaluate from the test results, could be quantified numerically.
Originality/value
The novelty of this study is the quantification of the strain rate effect on the bending strength of steel beams at elevated temperatures. The results clarify that the load–deformation relationship of steel beams could be evaluated by using in-plane analysis using the tensile coupon test results. The numerical simulation method can increase the accuracy of evaluation of the actual behaviour of steel members in case of fire.
Details
Keywords
This paper aims to investigate the fatigue life performance of SAC305 ball grid array solders under combined temperature and harmonic vibration loading conditions.
Abstract
Purpose
This paper aims to investigate the fatigue life performance of SAC305 ball grid array solders under combined temperature and harmonic vibration loading conditions.
Design/methodology/approach
Fatigue tests were performed using a sine dwell with resonance tracking vibration and temperature loading experiment. Finite element stress analysis was also performed to help in understanding the observed failure trends.
Findings
Fatigue test results showed that the lead-free solders tend to fail quickly in higher temperatures and higher vibration loading test conditions. The failure analysis results revealed that in low temperatures, the solder cracks are initiated and propagated at the package side. However, in high temperatures, the cracks are observed at the board side of the interconnect. In all conditions, the cracks are propagated throughout the intermetallic compound layer.
Originality/value
In the published literature, there is a lack of data in the area of fatigue assessment of lead-free solders under combined temperature and vibration loadings. This paper provides useful insights into combined thermal/vibration fatigue, i.e. reliability behavior of lead-free solder joint types.
Details
Keywords
The breakdown of laminar flow in the clearance space of a journal is considered, and the point of transition is considered in relation to experiments carried out with ‘bearings’…
Abstract
The breakdown of laminar flow in the clearance space of a journal is considered, and the point of transition is considered in relation to experiments carried out with ‘bearings’ of large clearance. Experiments involving flow visualization with very large clearance ratios of 0.05 to 0.3 show that the laminar regime gives way to cellular or ring vertices at the critical Reynolds number predicted by G. I. Taylor for concentric cylinders even in the presence of an axial flow and at a rather higher Reynolds number in the case of eccentric cylinders. The effect of the transition on the axial flow between the cylinders is small. The critical speed for transition as deduced by Taylor, is little affected by moderate axial flows and is increased by eccentricity. The effect of critical condition on the axial‐flow characteristics of the bearing system appears to be negligible, again for moderate axial flows. Assuming that the results can be extrapolated to clearances applicable to bearing operation, the main conclusion of this paper is that the breakdown of laminar flow, which is a practical possibility in very high‐speed bearings, is delayed by eccentric operation.
This paper aims to present the results of a study on the behaviour of a pre-stressed cable steel truss exposed to fire under fire conditions, basing on the results of a large…
Abstract
Purpose
This paper aims to present the results of a study on the behaviour of a pre-stressed cable steel truss exposed to fire under fire conditions, basing on the results of a large programme of experimental tests.
Design/methodology/approach
The research investigated the deformation and stress change on a pre-stressed steel cable, including the deflection and displacements at different joints and fire behaviour of the pre-stressed steel cable. In other words, the structural behaviours at different loaded pre-stress, the vertical loading, steel cable height, truss dimension and the final temperature were compared in case of fire.
Findings
The results showed that the strain of longitudinal chord was far larger than those of the transverse chords, the strains of lower chords were significantly larger than those of the upper chords, strain of the chord near the longitudinal centreline were also larger than those of the outside transverse chords. During heating, the displacement and strain gradually changed from linear to nonlinear with loading, and the yielded chord had also in an order those chords which were at mid-span and near to the longitudinal centreline, yielded at first.
Originality/value
Temperatures in the furnace and at several points of the pre-stressed cable steel truss, as well as deformations, deflections and the stress changes of upper chord and the bottom steel cable and the change of displacement at different joint were measured to achieve those goals and, consequently, to assess the deformation behaviours and temperature of the pre-stressed steel cable.
Details
Keywords
M. Vishal, K.S. Satyanarayanan, M. Prakash, Rakshit Srivastava and V. Thirumurugan
At this moment, there is substantial anxiety surrounding the fire safety of huge reinforced concrete (RC) constructions. The limitations enforced by test facilities, technology…
Abstract
Purpose
At this moment, there is substantial anxiety surrounding the fire safety of huge reinforced concrete (RC) constructions. The limitations enforced by test facilities, technology, and high costs have significantly limited both full-scale and scaled-down structural fire experiments. The behavior of an individual structural component can have an impact on the entire structural system when it is connected to it. This paper addresses the development and testing of a self-straining preloading setup that is used to perform thermomechanical action in RC beams and slabs.
Design/methodology/approach
Thermomechanical action is a combination of both structural loads and a high-temperature effect. Buildings undergo thermomechanical action when it is exposed to fire. RC beams and slabs are one of the predominant structural members. The conventional method of testing the beams and slabs under high temperatures will be performed by heating the specimens separately under the desired temperature, and then mechanical loading will be performed. This gives the residual strength of the beams and slabs under high temperatures. This method does not show the real-time behavior of the element under fire. In real-time, a fire occurs simultaneously when the structure is subjected to desired loads and this condition is called thermomechanical action. To satisfy this condition, a unique self-training test setup was prepared. The setup is based on the concept of a prestressing condition where the load is applied through the bolts.
Findings
To validate the test setup, two RC beams and slabs were used. The test setup was tested in service load range and a temperature of 300 °C. One of the beams and slabs was tested conventionally with four-point bending and point loading on the slab, and another beam and slab were tested using the preloading setup. The results indicate the successful operation of the developed self-strain preloading setup under thermomechanical action.
Research limitations/implications
Gaining insight into the unpredictable reaction of structural systems to fire is crucial for designing resilient structures that can withstand disasters. However, comprehending the instantaneous behavior might be a daunting undertaking as it necessitates extensive testing resources. Therefore, a thorough quantitative and qualitative numerical analysis could effectively evaluate the significance of this research.
Originality/value
The study was performed to validate the thermomechanical load setup for beams and slabs on a single-bay single-storey RC frame with and without slab under various fire possible scenarios. The thermomechanical load setup for RC members is found to be scarce.
Details
Keywords
Steel-reinforced concrete-filled steel tubular (SRCFST) columns have been increasingly popular in engineering practice for the columns' excellent seismic and fire performance…
Abstract
Purpose
Steel-reinforced concrete-filled steel tubular (SRCFST) columns have been increasingly popular in engineering practice for the columns' excellent seismic and fire performance. Significant design progress guidance has been made through continuous numerical and experimental research in recent years. This paper tested and analysed the residual loading capacity of SRCFST columns under axial loading after experiencing non-uniform ISO-834 standard fire.
Design/methodology/approach
The experimental research covered the main parameter of heating conditions, 1-side and 2-side fire, through two specimens. Two specimens were heated and loaded simultaneously in the furnace for 240 min. After cooling, the columns were moved to the hydraulic loading system and loaded to failure to determine the columns' residual capacity.
Findings
The experimental results indicated that the non-uniform heating area plays an essential role in the overall performance of SRCFST columns, the increasing heating area of columns results in lower residual loading capacity and stiffness. The SRCFST columns still had a high loading capacity after heating and loading in the fire.
Originality/value
The comparison of experimental data against design results showed that the design method generated a 16% safety margin for S2H4 and a 39% safety margin for S1H4.
Details
Keywords
Ranjit Kumar Chaudhary, Tathagata Roy and Vasant Matsagar
Despite recognizing the significance of risk-based frameworks in fire safety engineering, the usual approach in structural fire design is largely member/component level, wherein…
Abstract
Purpose
Despite recognizing the significance of risk-based frameworks in fire safety engineering, the usual approach in structural fire design is largely member/component level, wherein effect of uncertainties influencing the fire resistance of structures are not explicitly considered. In this context, a probabilistic framework is presented to investigate the vulnerability of a reinforced concrete (RC) members and structure under fire loading scenario.
Design/methodology/approach
The RC structures exposed to fire are modeled in a finite element (FE) platform incorporating material and geometric nonlinearity, in which the transient thermo-mechanical analysis is carried out by suitably incorporating the temperature variation of thermal and mechanical properties of both concrete and steel rebar. The stochasticity in the system is considered in structural resistance, thermal and fire model parameters, and the subsequent fragility curves are developed considering threshold limit state of deflection.
Findings
The fire resistance of RC structure is reported to be significantly lower in comparison to the RC members, thereby illustrating the current prescriptive design approaches based on studies of structural member behavior to be crucial from a safety and reliability point of view.
Practical implications
The framework developed for the vulnerability assessment of RC structures under fire hazard through FE analysis can be effectively used to estimate the structural fire resistance for other similar structure to enhance safety and reliability of structures under such extreme threats.
Originality/value
The paper proposes a novel methodology for vulnerability assessment of three-dimensional RC structures under fire hazard through FE analysis and provides comparison of the structural fragility with fragility developed for structural members. Moreover, the research emphasizes to assume 3D behavior of the structure rather than the approximate 2D behavior.
Details
Keywords
Abbas Rezaeian, Mona Mansoori and Amin Khajehdezfuly
Top-seat angle connection is known as one of the usual uncomplicated beam-to-column joints used in steel structures. This article investigates the fire performance of welded…
Abstract
Purpose
Top-seat angle connection is known as one of the usual uncomplicated beam-to-column joints used in steel structures. This article investigates the fire performance of welded top-seat angle connections.
Design/methodology/approach
A finite element (FE) model, including nonlinear contact interactions, high-temperature properties of steel, and material and geometric nonlinearities was created for accomplishing the fire performance analysis. The FE model was verified by comparing its simulation results with test data. Using the verified model, 24 steel-framed top-seat angle connection assemblies are modeled. Parametric studies were performed employing the verified FE model to study the influence of critical factors on the performance of steel beams and their welded angle joints.
Findings
The results obtained from the parametric studies illustrate that decreasing the gap size and the top angle size and increasing the top angles thickness affect fire behavior of top-seat angle joints and decrease the beam deflection by about 16% at temperatures beyond 570 °C. Also, the fire-resistance rating of the beam with seat angle stiffener increases about 15%, compared to those with and without the web stiffener. The failure of the beam happens when the deflections become more than span/30 at temperatures beyond 576 °C. Results also show that load type, load ratio and axial stiffness levels significantly control the fire performance of the beam with top-seat angle connections in semi-rigid steel frames.
Originality/value
Development of design methodologies for these joints and connected beam in fire conditions is delayed by current building codes due to the lack of adequate understanding of fire behavior of steel beams with welded top-seat angle connections.
Details
Keywords
Chiara Bedon and Christian Louter
Glass material is largely used for load-bearing components in buildings. For this reason, standardized calculation methods can be used in support of safe structural design in…
Abstract
Purpose
Glass material is largely used for load-bearing components in buildings. For this reason, standardized calculation methods can be used in support of safe structural design in common loading and boundary conditions. Differing from earlier literature efforts, the present study elaborates on the load-bearing capacity, failure time and fire endurance of ordinary glass elements under fire exposure and sustained mechanical loads, with evidence of major trends in terms of loading condition and cross-sectional layout. Traditional verification approaches for glass in cold conditions (i.e. stress peak check) and fire endurance of load-bearing members (i.e. deflection and deflection rate limits) are assessed based on parametric numerical simulations.
Design/methodology/approach
The mechanical performance of structural glass elements in fire still represents an open challenge for design and vulnerability assessment. Often, special fire-resisting glass solutions are used for limited practical applications only, and ordinary soda-lime silica glass prevails in design applications for load-bearing members. Moreover, conventional recommendations and testing protocols in use for load-bearing members composed of traditional constructional materials are not already addressed for glass members. This paper elaborates on the fire endurance and failure detection methods for structural glass beams that are subjected to standard ISO time–temperature for fire exposure and in-plane bending mechanical loads. Fire endurance assessment methods are discussed with the support of Finite Element (FE) numerical analyses.
Findings
Based on extended parametric FE analyses, multiple loading, geometrical and thermo-mechanical configurations are taken into account for the analysis of simple glass elements under in-plane bending setup and fire exposure. The comparative results show that – in most of cases – thermal effects due to fire exposure have major effects on the actual load-bearing capacity of these members. Moreover, the conventional stress peak verification approach needs specific elaborations, compared to traditional calculations carried out in cold conditions.
Originality/value
The presented numerical results confirm that the fire endurance analysis of ordinary structural glass elements is a rather complex issue, due to combination of multiple aspects and influencing parameters. Besides, FE simulations can provide useful support for a local and global analysis of major degradation and damage phenomena, and thus support the definition of simple and realistic verification procedures for fire exposed glass members.
Details