Search results

The purpose of this paper is to explain how abstract space of the State – universally and specifically within the context of Middle Eastern cities – aims to homogenise the city and eliminate any anomaly that threatens its power structure.

Through a historical and discourse analysis of these policies and processes in the two case studies, this paper presents a contextualised reading of Lefebvre’s concept of abstract space and process of abstraction in relation to the alienation of political public spaces.

The paper proposes that regardless of these homogenising strategies being applied universally, they fail to respond to contextual particularities and therefore they – in a contradictory manner – may themselves produce a space of resistance and difference.

This paper focusses on Iran, the case of Tehran and Turkey, the case of Taksim Square and Gezi Park in Istanbul. Recent policies and strategies have been proposed and implemented to reduce, alienate and possibly neutralise the impacts of urban and political protests in these cities and socio-political contexts.

Space tourism has to be regulated as a subset of private spaceflight activities, whereby humans are sent to outer space in a fundamentally private context. In addition to space law, air law would be relevant for addressing private spaceflight, but neither regime has at the international level regulated relevant activities to any appreciable extent. They provide little more than a set of guiding overarching principles. Much of the onus of future regulation will fall on the shoulders of individual states, most notably the United States. In the more distant future, this may result in a special international regime, using elements of both space and air law.

A challenging task for context‐aware pervasive systems is reasoning about context in uncertain environments where sensors can be inaccurate or unreliable and inferred situations ambiguous and uncertain. This paper aims to address this grand challenge, with research in context awareness to provide feasible solutions by means of theoretical models, algorithms and reasoning approaches.

This paper proposes a theoretical model about context and a set of context verification procedures, built over the model and implemented in a context reasoning engine prototype. The verification procedures utilize beneficial characteristics of spatial representation of context and also provide guidelines based on heuristics that lead to resolution of conflicts arising due to context uncertainty. The engine's reasoning process is presented and it is shown how the proposed modeling and verification approach contributes in tackling the uncertainty associated with the reasoning task. The paper experimentally evaluates this approach with a distributed simulation of a sensor‐based office environment with unreliable and inaccurate sensors.

Important features of the model are dynamic aspects of context, such as context trajectory and stability of a pervasive system in given context. These can also be used for context verification as well as for context prediction. The model strength is also in its generality and its ability to model a variety of context‐aware scenarios comprising different types of information.

The paper describes a theoretical model for context and shows it is useful not only for context representation but also for developing reasoning and verification techniques for uncertain context.

Organizations of today are becoming ever more focused on their business processes. This has resulted in an increasing interest in using best practices for business process re‐engineering. Two problems arise in connection to using best practices: how to find a best practice that suits particular purposes, and how to ensure that the process from the best practice has the same nature as the process under re‐engineering. The purpose of this paper is to address these issues.

The paper suggests using business process patterns, i.e. relatively high level business process models, for making near formal comparison of business processes. The paper analyzes widespread modeling techniques to find out which of them suits the task of building patterns for comparison. Based on this analysis, the state‐flow modeling technique is chosen and first steps towards formal definition of business process patterns based on this technique are suggested.

A pattern is defined based on the notions of state space, goal, as a surface in the state space, and valid movements towards the goal. A thinkable procedure of constructing patterns is demonstrated on two real‐life examples. A hypothetical procedure for comparing process is suggested but it still needs to be verified in practice.

The originality of the paper is the way the patterns are formulated and the underlying model, the state‐flow view of processes, upon which the patterns are founded.

The optimal control on reassembly (remanufacturing assembly) error is one of the key technologies to guarantee the assembly precision of remanufactured product. However, because of the uncertainty existing in remanufactured parts, it is difficult to control assembly error during reassembly process. Based on the state space model, this paper aims to propose the optimal control method on reassembly precision to solve this problem.

Initially, to ensure the assembly precision of a remanufactured car engine, this paper puts forward an optimal control method on assembly precision for a remanufactured car engine based on the state space model. This method takes assembly workstation operation and remanufactured part attribute as the input vector reassembly status as the state vector and assembly precision as the output vector. Then, the compensation function of reassembly workstation operation input vector is calculated to direct the optimization of the reassembly process. Finally, a case study of a certain remanufactured car engine crankshaft is constructed to verify the feasibility and effectiveness of the method proposed.

The optimal control method on reassembly precision is an effective technology in improving the quality of the remanufactured crankshaft. The average qualified rate of the remanufactured crankshaft increased from 83.05 to 90.97 per cent as shown in the case study.

The optimal control method on the reassembly precision based on the state space model is available to control the assembly precision, thus enhancing the core competitiveness of the remanufacturing enterprises.

The provision of open spaces within a residential development is often seen as unimportant. The Malaysian Government targeted to provide 2 hectares of open space per 1000 population to be achieved as a developed nation status by the year 2020. This vision can be seen as the Government attempt to ensure the sustainability of open spaces in Malaysia. The Federal Department of Town and Country Planning, Peninsular Malaysia (FDTCP) has produced a planning standard guideline to supervise the implementation of the open space policy in Malaysia. According to FDTCP; until December 2009, Malaysia has achieved a percentage of 1.19 hectares of open space per 1000 population. Achieving the standard requires commitment of local authorities to implement the open space policy. However, the adoption of open spaces policy differs among local authorities, from a simplistic general approach of land ratio techniques to an ergonomics method. The paper examines the local allocation practices using 5 different approaches and it argues that implementation of open space by local planning practices requires the knowledge of and understanding by planning profession towards a long term sustainable green objectives.

Giorgio Agamben has used the notion of the state of exception to describe the United States’ detention camps in Cuba. Agamben argues that the use of the state of exception in the U.S. can be traced back to President Lincoln's suspension of the right of habeas corpus during the Civil War. This paper suggests that this argument obscures more relevant legal and political precedents that can be found in U.S. territorial legal history. Moreover, while Agamben's argument obscures conceptual distinctions between a state of emergency and a state of exception, his argument also provides resources that can expose the limits of liberal interpretations of the relationship between the State, the citizen, and the law.

Why and how was the territorialized state form disseminated through colonial expansion? To begin to answer this question, this study proposes a relational account of the production of territorialized state space, drawing on empirical evidence from two understudied cases of colonial expansion in the early 20th century: Spain in Morocco and Italy in Libya. Drawing on colonial and local archival sources, I demonstrate how colonial territoriality resulted from a violent clash between an aspiring colonial power and a reactive, rural counter-state building movement, led by the Amir Abd al-Krim in the Rif Mountains of northern Morocco and the Sanusi leader, Omar al-Mokhtar, in Cyrenaica in eastern Libya. Territorialization was not imposed from the outside by a European colonial power. Rather, it was produced relationally through violent interactions between the colonial state and a local autonomous political entity. This analysis contributes to the still-nascent study of colonial state space and to contemporary policy debates about political order in North Africa and the Middle East by emphasizing the importance of local political mobilization, the complexity of interactions catalyzed across local and translocal scales by colonial expansion, and the high levels of physical violence endemic to the production of territorialized state space.

The purpose of this paper is to critically examine the reasons behind a decade long contestations between the Georgian government and the petty traders over the access to the public space for commercial use.

The paper relies on the repeated ethnographic fieldwork conducted in Tbilisi in 2012 and 2013. The ethnographic interviews with legally operating traders and illegal street vendors are supplemented by the in-depth interviews with the representatives of the city government and secondary literature on Georgia’s post-revolutionary transformation.

Bridging the critical literature on the politics of the public space with Polanyi’s theory on commodification of fictitious commodities as a precondition of establishment of a market economy, the author argues that for the Georgian government control of the public space was necessary to pursue neoliberal marketisation policies. These policies required removal of the petty traders from public spaces because the state needed to restrict access to public space and limit its commercial usage to delineate public and private property and allow commodification of the urban land and property. As the commodification intensified and the rent prices started growing and fluctuating, the access to the public space became even more valuable for the petty traders. Therefore, the traders developed subversive tactics undermining the division between public and private space and property.

The paper demonstrates the importance of enforcing the public-private divide in the process of establishing a market economy in transitional settings. Moreover, it illustrates little discussed social costs of establishing such a divide.

In a process termed “organizational centrifugalism,” this chapter describes how avant-garde artists sought new, alternative organizational spaces for innovations in the visual arts from the late nineteenth century through the early twentieth century and how new alternative marketspaces co-evolved with these new organizational spaces. Organizational centrifugalism begins with the denouement of the state-run Salon and Academy in the mid-nineteenth century; the rise of the dealer-critic system and other, non-salon alternative exhibition spaces of French Impressionism in the latter half of the nineteenth century; and through many new organizational spaces associated with Modernism such as formal artists groups, museums, great exhibitions, schools of art, and Modernist art itself. The ultimate effect of organizational centrifugalism is drawing avant-garde art closer to the public and eventually the masses. Excessive organizational centrifugalism, however, can be dangerous to the avant-garde art.